Only show results available in Virginia? Ok

remedial construction Applications

  • Remedial Construction for Mining and Metals

    ENTACT is the industry leader in the management and treatment of heavy metal impacted soil, sludge, and debris. Approximately half of the projects we have completed over the past 21 years have involved metals. These projects have included soil and sediment removal, residential cleanups, smelter closures, earthwork/mine reclamation, and decontamination and demolition of mine and mill structures at both active and abandoned facilities. ENTACT holds seven patents related to treatment of heavy metal impacted materials.

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Remedial Construction for the Energy Sector

    ENTACT holds alliance contracts or master service agreements with most of the major energy companies in the United States. These service agreements were awarded and are maintained based upon health and safety culture and metrics, competitive pricing, and depth of experience. Our experience includes environmental and geotechnical construction projects at active refineries, exploration and production sites, terminals, pipelines, and abandoned properties.

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Remedial Construction for Ports

    ENTACT has successfully completed projects at a wide variety of transportation facilities including ports, rail systems, terminals, and airports. These projects typically require elaborate traffic control precautions as well as sophisticated shoring systems for protection of critical infrastructure. Our safety culture and in-house geotechnical expertise put us in a position to add significant value to complicated transportation related projects.

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Premium

    Restoration

    Restoring structures after floods and fires is a constantly evolving industry. In addition to keeping up with industry best practices for health and safety of both the contractors and the building residents post restoration, it is also important to be working with modern and reliable restoration equipment. Utilizing Omnitec and OmniAire products will allow you to take advantage of the latest best practice methods with equipment you know will work reliably and safely. Airborne contaminates and dust is a significant consideration for almost any restoration project. Did you know that studies have shown a substantial increase in air particulate matter during the drying process? Not only does dust and contaminates affect your worker’s safety, but also the safety of the post-restoration occupants. Just increasing the air circulation doesn’t remedy the situation and, without adequate filtration, may actually create more problems.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Waste recovery for construction industry

    Construction waste consists of unwanted material produced directly or incidentally by the construction industry. This includes materials that may contain lead, asbestos or other hazardous materials. There is increasing pressure on the construction industry to dispose of this hazardous material in an environmentally responsible manner. Tetronics can help alleviate this pressure by providing waste recovery plants to deal with all types of hazardous wastes generated from a construction projects lifespan: from land remediation through to the treatment of APCs from incineration as well as the treatment of asbestos.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Remedial Construction for Airports and Terminals

    ENTACT has successfully completed projects at a wide variety of transportation facilities including ports, rail systems, terminals, and airports. These projects typically require elaborate traffic control precautions as well as sophisticated shoring systems for protection of critical infrastructure. Our safety culture and in-house geotechnical expertise put us in a position to add significant value to complicated transportation related projects.

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Remedial Construction for Rail Systems

    ENTACT has successfully completed projects at a wide variety of transportation facilities including ports, rail systems, terminals, and airports. These projects typically require elaborate traffic control precautions as well as sophisticated shoring systems for protection of critical infrastructure. Our safety culture and in-house geotechnical expertise put us in a position to add significant value to complicated transportation related projects.

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Remedial Construction for Former Oil Field Production Sites

    - Remediation of 600 former production or release sites transecting four counties - Treatment of over 500,000 cubic yards of petroleum impacted soils from the various site areas in an 8-acre bioremediation landfarm - Remediated soils are then re-used as backfill throughout the disturbed areas

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Premium

    In-Situ Groundwater Remediation for the Site Remediation Industry

    In-situ groundwater remediation method is based on injection of Fe(0) nanoparticles through application wells directly into the contaminated water. nZVI injection is very fast, reaching significantly lower operating costs compared to commonly used remediation methods (expensive construction of reactive barriers, building of pump&treat stations, excavation of contaminated soil etc.). In comparison to other in-situ technologies a far lower quantities of injected chemical is needed due to high efficiency of the product and thus the time and cost of remediation is reduced.

    By NANO IRON s.r.o. based in Rajhrad, CZECH REPUBLIC.

  • Solutions for the vapor suppression

    BioSolve Pinkwater is used at major remediation and construction work-sites where excavation of contaminated soils may release noxious organic odors or hazardous VOCs. The dilute solution is sprayed directly onto newly exposed soil surfaces or stockpiles of contaminated material where volatilization is taking place. Used as an alternative to foam, Pinkwater creates a barrier that keeps vapors in the soil, allowing work to continue safely without disruption to workers or neighbors.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Active Refinery Remediation

    Waste Management Unit (WMU) closures at this active refinery Waste Management Unit (WMU) closures at this active refinery - Installation of several soil, Liquid Boot, and full multi-layer geocomposite cover systems in various facility locations- - Sensitive construction practices including large scale activities near power lines, 30 inch raw water line, and several active emergency flares - Completed performance based in-situ solidification/stabilization, cap and closure, using ENTACT owned large diameter auger Delmag rig and custom-fabricated Geodrill - COC`s include heavy metals, PAH, volatile organic compounds, and petroleum hydrocarbons Performance criteria include an unconfined compressive strength of 10 psi, permeability coefficient of less than 2.1x10-6 cm/sec, and an admixture pH of less than 11.5 - ENTACT performed in-house treatability analysis to develop reagent admixture

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Monitoring of VOCs in Porewater

    Monitoring VOCs in porewater in the unsaturated zone is now possible.

    Sorbisense regularly offers new options for using the patented Sorbicell, which is used to monitor surface water, wastewater and groundwater.

    The latest is almost as “ground-breaking” as the SorbiCell itself. Until now it has been difficult, if not impossible, to directly monitor for volatile substances in pore water in the unsaturated zone. But the environmental consultancy firm Ejlskov A/S in Aarhus combined the use of Sorbisense sampling equipment with the proven technology of soil water samplers. With this combination, a practical new method is made available, which allows for monitoring the presence of porewater-dissolved VOCs above the groundwater table. This provides a significantly improved basis to define and determine the leaching risk to the groundwater, and thus allows for better and more cost-efficient decisions to prevent the pollution in reaching the groundwater.

    A simple construction with multiple options

    The application uses SorbiCell VOC combined with suction cells, soil water samplers. When installed correctly, and applied with the correct procedures, the suctions cells extract capillary bound water from the soil matrix. The system demands no other resource than a container that is put under vacuum. The vacuum in the container then ensures a flow through of the Sorbicell over a period of time, fx. 2-3 weeks. The method is highly suitable for monitoring a site over longer periods of time.

    By SORBISENSE based in Tjele, DENMARK.

  • Premium

    Equipment

    Omnitec Design manufactures negative air machines, scrubbers, moisture extractors, heaters, pressure monitors, and water filtration equipment used by abatement and restoration contractors, health care facilities, in industrial and commercial applications and a wide range of environmental cleanup projects. Our equipment combines the best technologies available for HEPA air filtration, control of VOCs, odor and biological contaminants and heaters for structural drying and sanitizing. Our mission is to provide high quality and reliable filtration equipment. Our equipment is used for Abatement, Remediation, Construction and renovations, labs and healthcare facilities, and more. When you purchase our equipment you will receive not only a quality product, built in the USA, but also our customer service which is the best in the industry. By purchasing our filtration, dust collecting, and purifying equipment, to will receive from Omnitec our complete support. Breathe easy.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you