Only show results available in Virginia? Ok

remediation method Applications

  • Premium

    Hazardous waste treatment solutions for site remediation

    The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from the soil washing process. However, we are able to handle soil contaminated with mercury, hydrocarbons, PAH, PCB, dioxins, furans, organic-lead compounds and many more. VacuDry plants for on-site ex-situ remediation projects are delivered in a modular design.

    By econ industries GmbH based in Starnberg, GERMANY.

  • In-Situ Soil & Groundwater Remediation

    The use of H2O2 to chemically oxidize the contaminants into mineralized products (CO2 , salts, and readily biodegradable organic fragments) offers a number of advantages over these current treatment methods. Benefits of Soil Decontamination by Chemical Oxidation: The reagent used (H2O2) is inexpensive, readily available, and has as its reaction products water and oxygen; The chemistry of the process (Fenton's Reagent) has been known for over 50 years and its applicability to a wide variety of contaminants is well documented; The process is easily applied and controlled; The treatment occurs rapidly, lasting from a few hours to a few weeks; The process produces no by-product wastestreams, and can be tuned for the degree of contaminant removal desired. This allows it to be used synergistically with other technologies such as biotreatment or soil washing.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Premium

    In-Situ Groundwater Remediation for the Site Remediation Industry

    In-situ groundwater remediation method is based on injection of Fe(0) nanoparticles through application wells directly into the contaminated water. nZVI injection is very fast, reaching significantly lower operating costs compared to commonly used remediation methods (expensive construction of reactive barriers, building of pump&treat stations, excavation of contaminated soil etc.). In comparison to other in-situ technologies a far lower quantities of injected chemical is needed due to high efficiency of the product and thus the time and cost of remediation is reduced.

    By NANO IRON s.r.o. based in Rajhrad, CZECH REPUBLIC.

  • Monitoring of VOCs in Porewater

    Monitoring VOCs in porewater in the unsaturated zone is now possible.

    Sorbisense regularly offers new options for using the patented Sorbicell, which is used to monitor surface water, wastewater and groundwater.

    The latest is almost as “ground-breaking” as the SorbiCell itself. Until now it has been difficult, if not impossible, to directly monitor for volatile substances in pore water in the unsaturated zone. But the environmental consultancy firm Ejlskov A/S in Aarhus combined the use of Sorbisense sampling equipment with the proven technology of soil water samplers. With this combination, a practical new method is made available, which allows for monitoring the presence of porewater-dissolved VOCs above the groundwater table. This provides a significantly improved basis to define and determine the leaching risk to the groundwater, and thus allows for better and more cost-efficient decisions to prevent the pollution in reaching the groundwater.

    A simple construction with multiple options

    The application uses SorbiCell VOC combined with suction cells, soil water samplers. When installed correctly, and applied with the correct procedures, the suctions cells extract capillary bound water from the soil matrix. The system demands no other resource than a container that is put under vacuum. The vacuum in the container then ensures a flow through of the Sorbicell over a period of time, fx. 2-3 weeks. The method is highly suitable for monitoring a site over longer periods of time.

    By SORBISENSE based in Tjele, DENMARK.

  • Premium

    Contaminated Soils with Diesel Fuel and Heating Oils

    Sitelab's UVF-3100D is used to test soil to help investigate and clean up sites contaminated by above ground or underground storage tanks (USTs). Soils can be analyzed for extended diesel range organics (EDRO) or extractable petroleum hydrocarbons (EPH). Results correlate well to confirmatory lab methods.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Geotextiles solutions for landfills areas

    Historically, landfills have been the most common method of organized waste disposal and remain so in many places around the world. Landfills  are essential applications to ensure long service life and prevent soil pollution. In industrial basins, TenCate protection geotextiles guarantee the protection of the geomembrane against all risks of mechanical damages. A cost effective and environmental friendly solution to sort, treat and recycle waste.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Premium

    Restoration

    Restoring structures after floods and fires is a constantly evolving industry. In addition to keeping up with industry best practices for health and safety of both the contractors and the building residents post restoration, it is also important to be working with modern and reliable restoration equipment. Utilizing Omnitec and OmniAire products will allow you to take advantage of the latest best practice methods with equipment you know will work reliably and safely. Airborne contaminates and dust is a significant consideration for almost any restoration project. Did you know that studies have shown a substantial increase in air particulate matter during the drying process? Not only does dust and contaminates affect your worker’s safety, but also the safety of the post-restoration occupants. Just increasing the air circulation doesn’t remedy the situation and, without adequate filtration, may actually create more problems.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you