remediation time Applications

Monitoring VOCs in porewater in the unsaturated zone is now possible.

Sorbisense regularly offers new options for using the patented Sorbicell, which is used to monitor surface water, wastewater and groundwater.

The latest is almost as “ground-breaking” as the SorbiCell itself. Until now it has been difficult, if not impossible, to directly monitor for volatile substances in pore water in the unsaturated zone. But the environmental consultancy firm Ejlskov A/S in Aarhus combined the use of Sorbisense sampling equipment with the proven technology of soil water samplers. With this combination, a practical new method is made available, which allows for monitoring the presence of porewater-dissolved VOCs above the groundwater table. This provides a significantly improved basis to define and determine the leaching risk to the groundwater, and thus allows for better and more cost-efficient decisions to prevent the pollution in reaching the groundwater.

A simple construction with multiple options

The application uses SorbiCell VOC combined with suction cells, soil water samplers. When installed correctly, and applied with the correct procedures, the suctions cells extract capillary bound water from the soil matrix. The system demands no other resource than a container that is put under vacuum. The vacuum in the container then ensures a flow through of the Sorbicell over a period of time, fx. 2-3 weeks. The method is highly suitable for monitoring a site over longer periods of time.

By Sorbisense A/S based in Tjele, DENMARK.

The Series 8900 Naphthalene Analyzer provides direct measurement of Naphthalene in ambient air. This instrument is utilized in industrial plants to monitor workplace exposure limits and at remediation and Superfund sites. The Series 8900 Naphthalene Analyzer employs a photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Naphthalene and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. Naphthalene is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

By MOCON, Inc. - Baseline - AMETEK based in Lyons, COLORADO (USA).

In-situ groundwater remediation method is based on injection of Fe(0) nanoparticles through application wells directly into the contaminated water. nZVI injection is very fast, reaching significantly lower operating costs compared to commonly used remediation methods (expensive construction of reactive barriers, building of pump&treat stations, excavation of contaminated soil etc.). In comparison to other in-situ technologies a far lower quantities of injected chemical is needed due to high efficiency of the product and thus the time and cost of remediation is reduced.

By NANO IRON s.r.o. based in Rajhrad, CZECH REPUBLIC.