Only show results available in Virginia? Ok

respirator Applications

  • Air treatment

    Activated carbon grades for air treatment applications such as fume cupboards, odour removal, respirator cartridges and so on.

    By Eurocarb, The European Subsidiary of Haycarb PLC based in Bristol, UNITED KINGDOM.

  • Carbon Monoxide (CO) monitoring

    Carbon monoxide poisoning is the most common type of fatal poisoning in many industrialized countries. Carbon monoxide is a colourless, odorless and tasteless gas caused by the incomplete combustion of hydrocarbon fuels. Carbon monoxide is a toxic gas to the human body, when inhaled it binds to hemoglobin, myoglobin, and mitochondrial cytochrome oxidase reducing oxygen storage, transport and respiration in these organelles.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Q-EHS Health and Safety

    The Health & Safety Suite provides key tools for maintaining records, compiling data and generating federal and state safety and health reports, including OSHA 300 and potential exposure risks reports. Additionally, the suite monitors the subsequent costs and activities for evaluating trends and tracking metrics to make well-informed business decisions. Training Industrial Hygiene Medical Tracking Injury-illness Accident Tracking Root Cause Analysis Corrective Action Respirator Monitoring

    By Quantum Compliance based in Ann Arbor, MICHIGAN (USA).

  • XRF analysis for lead paint

    Niton analysers facilitate direct surface testing for lead paint, testing for lead in dust wipes from surfaces, testing the lead content of soil in the surrounding area (containment) and the testing of lead content in filters from respirators or volume air samplers for worker/public protection.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Waste water respirometry solutions for process optimisation

    Respiration rate of activated sludge has been recognised as a key controlling element in the modelling of process control, by the International Water Association Task Group. Actual respiration rate of the sludge in the aeration tanks, as well as the endogenous and maximum respiration rates are variables that indicate the rate of BOD removal and aeration requirements. The maximum respiration rate is also closely linked to the Critical Oxygen Concentration point, that is, the point at which diffusion over the bacterial cell walls ceases and therefore biodegradation is significantly compromised.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Aquatic Respirometry

    Aquatic respiration can be simply yet accurately measured on intact, live organisms using a variety of Strathkelvin Instruments respirometry systems. As with all of our respirometry systems, an aquatic system would comprise of an oxygen meter (either 782 or 928), one or more, high precision, 1302 oxygen electrodes (link) and a respiration chamber to house the organism. The researcher also has a choice of measuring respiration rates via closed or flow-through respirometry. Both closed and flow-through systems utilise the same oxygen meters and 1302 oxygen electrodes, however, the chamber in which the organism is housed will differ.Respiration of aquatic organisms (closed cell method)

    By Strathkelvin Instruments Ltd. based in Motherwell, UNITED KINGDOM.

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Lead Paint Removal

    No respirator required. No containment structures. Osha, epa,  rcra & sspc compliance. Combine removal, containment and final packaging into a one-step process using Pentek’s complete lead paint abatement system. The fully integrated process reduces or eliminates the need for worker respiratory protection by reliably reducing hazardous dust emissions far below regulatory requirements.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Waste water respirometry solutions for toxicity tracking

    If toxicity is identified in a mixed sewage entering a treatment works, the problem for the plant manager is to track and identify the source of the toxicity. This can be done by sampling the effluent stream at various points in its length. By working in a logical sequence back up the sewer network the number of samples can be minimised. This type of testing should be rigorously enforced for new product introduction by a waste producer, as well as sampling the effluents directly at source. The samples would be tested against the activated sludge of the receiving works, using the Respiration Inhibition Test or the Nitrification Inhibition Test.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Waste water respirometry solutions for monitoring activated sludge health - sour test

    Respiration rate monitoring of Antwerp treatment works showed periods when the activated sludge was up to 40% inhibited, with resultant sludge washout episodes. Using the Health monitoring test, a pattern of ‘normal’ respiration rates for a plant can be determined. Lower respiration rates will alert the treatment works to a chronic toxicity problem, allowing corrective actions to be taken. Toxicity monitoring can now be carried out on a routine daily basis, at all treatment works receiving potentially toxic wastewaters. This is especially important if there has been a history of poor plant performance.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Waste water respirometry solutions for toxicity based consents

    Water companies, water authorities or publicly-owned treatment works (POTW) need to have some knowledge of the composition of the wastes they it receive. In addition to testing for ammonia and BOD or COD levels, treatment works can license industrial discharges on the basis of concentrations of some of the known toxic compounds. However, it is recognised that very many non-regulated toxic materials still enter the treatment works and reduce the efficiency of biodegradation, and may cause toxic shock. The way is now open for more widespread use of direct toxicity tests as a basis for toxicity-based consents. Samples of the industrial effluent are collected at source, for testing on the actual bacteria of the receiving activated sludge. The tests used are the Respiration Inhibition Test and the Nitrification Inhibition Test. Note that this approach mirrors that of the regulators of discharges to receiving waters, who are now using direct toxicity tests (DTA) or whole effluent toxicity tests (WET tests) in order to protect the receiving environment.

    By Strathkelvin Instruments Ltd. based in Motherwell, UNITED KINGDOM.

  • Waste water respirometry solutions for toxicity reduction tests

    In industrial manufacturing companies, before a new process comes on-line, it is important to measure the toxicity of the effluent stream. This is especially the case for companies who treat their own waste. From the toxicity value (EC50) obtained, it may be a cost-effective solution to simply discharge the effluent to the treatment works at a slow and defined rate to minimise damage to the activated sludge. Following a period of acclimatisation it is often possible to increase feed rates to the plant and this can again be managed using the Strathtox Respirometer. An alternative approach is to undertake toxicity reduction procedures, such as neutralisation or acid hydrolysis, in pilot-scale laboratory studies. The Respiration or the Nitrification Inhibition Test may be used for this. In the future, toxicity reduction may be stipulated by local authority, water company or publicly-owned treatment works prior to giving discharge consents. Toxicity reduction may be evaluated using toxicity tests on activated sludge provided by the treatment works.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you