Only show results in Virginia? Ok

ro membrane Applications

  • Membrane filtration systems for reduction of BOD/COD

    Reverse Osmosis Polishers can concentrate BOD/COD from evaporator condensate and RO permeate streams to reduce waste water. Polished water can also be re-used in plant for boiler water make-up and CIP systems. In Dairy Industry applications, `polishing` of these process water streams aids in the production of Class I water for re-use from dairy products as defined and regulated under Food & Drug Administration rules. Water produced with this technique is also very soft, generally resulting in lower cleaning chemical consumption.

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Premium

    Filtration solutions for pre-treatment for desalination industry

    In desalination plants it is of great importance for the operation of the entire plant that the pre-treatment of the water is good before the salt is to be removed. For reverse osmosis (RO) desalination plants a good pre-treatment is essential for avoiding membrane fouling, resulting in reduced water production and increased operational costs.

    By Filtralite Saint-Gobain Byggevarer As based in Alnabru, NORWAY.

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important process for a wide variety of applications including: medical, laboratory, desalination, industrial wastewater, Deionized (Dl) pretreatment, and drinking water.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • On-site refinery water treatment for oil and gas industry

    MIOX offers a variety of on-site refinery water treatment solutions for cooling loops, UF & RO membranes and wastewater.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Reverse Osmosis - Pretreatment and Clarification - Wils ElectroWaveTM Conditioning

    Wilsa ElectorWaveTM Conditioning can be used to pretreat water for reverse osmosis. The Wilsa Effect breaks emulsions, enhances separation to remove hydrocarbons and clarify solids before entering RO treatment. The effect also substantially lowers the viscosity of the water which allows it to pass through membranes with less effort.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Industrial and commercial water filtration for reverse osmosis plants

    Reverse Osmosis or RO is a system used to produce an ultra-high quality of water with use of membrane. Reverse Osmosis plants are required in many production processes.  Damage to these high quality membranes can easily be caused if no pre-filtration is in place to protect the system from high loading, this can result in extremely high costs of repairs, ranging from tens of thousands to millions, not to mention the loss of production to a company if as a result of plant failure production has to be stopped until the system is repaired.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Using evaporation to dewater Reverse Osmosis reject waste streams

    Reverse Osmosis (RO) technology has been used for years in various industries to separate dissolved solids from water by forcing the water through a semi-permeable membrane. RO is also commonly used to purify drinking water and desalinate seawater to yield potable water. The water and other molecules with lower molecular weight (specific weight of molecules allowed to pass through is dependent on the selected membrane) pass through the micropores in the membrane, yielding a purified water stream called the permeate. Larger molecules are retained by the membrane as well as a portion of the water that does not pass through the membrane. This concentrated stream is called the concentrate or RO reject.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Liquid Rock - Prevening Scale Formation from Ground Water Hardness

    Groundwater is in contact with soil and rock minerals. Significant amounts of the minerals are dissolved in the groundwater. Elevated water hardness is the result of the water interaction and partial dissolution of carbonate minerals. Scale formation is a crystallisation process. Crystals are a highly organised arrangement of molecules. The determining circumstances for a successful crystallisation event include concentration, temperature, pressure and chemical environment. Suitable conditions for the formation of a crystal require numerous factors to coincide. CALSTAT RO-30 provides crystallisation interference at a molecular level :  Excellent results are achieved at low trace quantities of product. Calstat RO-30 dosed at trace levels of 4-10 kg per million litres  Corrosion on steel surfaces is reduced or eliminated  For drinking water production with RO (reverse osmosis) systems, membrane fouling is reduced. The water additive

    By WAT Australia Pty.Ltd. based in West Australia, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you