Only show results available in Virginia? Ok

safety can Applications

  • Premium

    Sound level measurement for safety regulations

    Hand held instruments for the measurement of an employee`s noise exposure. Frequency analysis within Sound Level Meters can also be used to determine the correct selection of hearing protection.

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Aerosol and particle technology for operational safety industries

    During the production, the conveyance and the filling of solid particles in the form of powders, bulk materials, granulates, pellets and many other shapes, dust is generated as a rule. This dust formation can lead to an impairment of the operational safety and the reliability of the production process, e. g. by means of inhalable dust fractions. The workplace hygiene can also be endangered, e. g. through dust accumulations.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Thermal measurement for workplaces

    The importance of thermal comfort in the indoor environment can not be underestimated; infact, a vast majority of complaints about indoor climate relate to poor thermal comfort.

    By Dantec Dynamics based in Skovlunde, DENMARK.

  • Rugged Mobile Technology for Public Safety

    Public safety workers broke ground long ago on getting computers out in the field. Vehicle-mounted notebooks are an expected part of a police vehicle nowadays. But that innovation continues with rugged PDAs for tracking patient data, rugged tablets for navigating unfamiliar routes and pre-planning for fire departments. Whether it’s for fire, police, EMS or other areas of public safety, we can provide you with form factors and features for top performance.

    By Handheld UK and Ireland Ltd based in Leamington Spa, UNITED KINGDOM.

  • Premium

    AutoChem - Process Safety

    Detect Thermal Hazards Early and Design Safety Into The Chemical Process. We must ask ourselves: How much heat will be generated under normal conditions? How will a change in condition, controlled or uncontrolled, change the rate of heat generation? Can our process equipment handle removing the heated generated? Answering these questions with speed and accuracy is necessary to ensure safe and efficient design and scale-up of synthesis reactions.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Safety incident tracking

    So you have a job that requires you to be involved in hazardous areas? Does your company promote high standards of safety culture? Are you regulated by the EPA, OSHA, and other federal, state, and local agencies? Documenting non-conformances and incidents in disparate static spreadsheets and home-grown solutions is not enough to meet most requirements. You need a centralized safety solution that also allows for detailed evaluations of root cause, corrective action tracking and trending performance so you can mitigate future risk and address systemic issues in the workplace. Perillon Workspace provides a comprehensive and powerful tool to quickly and efficiently identify trends, issues, and problems related to safety.

    By Perillon Software Inc. based in Acton, MASSACHUSETTS (USA).

  • Magnetic Water Conditioning

    Stanford Magnets provide Water Conditioning Magnets that can be installed to water piping to lower the hardness of water.

    By Stanford Magnets based in Irvine, CALIFORNIA (USA).

  • Premium

    Healthcare and Lab Equipment

    Omnitec Design is concerned with providing the highest levels of protection for hospital workers and patients. After hospital cleaning staff carry out infectious disease control cleanup procedures (the removal of all physical items) in the infected areas, the room can then be put back in service faster if the air is purified and sterilized using an OmniAire PAC Portable Air Cleaner with high output PEROx air purifier module.xide plasma generator. This results in minimal room shut down and disruption which is a major concern for all hospital administrations. To create a clean room environment for hyper-sensitive patients, the room can be positively pressurized with clean, sterile air to prevent bio-contaminants to migrate into the room. This protective environment is recommended for HIV patients, bone marrow transplant, ICU rooms, diabetes patients, cancer patients, stem cell transplants and other high risk patients.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Abatement and Remediation

    Containment and safety issues are a critical consideration when working on any mold, asbestos, or lead remediation/abatement projects. Improperly contained, the dust and bio-contaminants released can, be very harmful for both on-site workers and occupants in neighboring areas. Exactly how you approach your containment and capture solutions will depend on the individual site’s risk assessment report. If you need help identifying solutions to the issues raised in the report, feel free to contact our customer service department and we can review your options together. In most cases, however, there are four common considerations that will be relevant: -Meeting Containment and Air Change Requirements -Monitoring of Containment Pressure -Sterilization of Filtered Air -Removal of Odors, Mold Spores, VOC’s and other Airborne Bio-Contaminates

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Disaster and Epidemic Response

    Anywhere there is a large gathering of people, respiratory infections can be acquired due to exposure to airborne pathogenic microorganisms. To help prevent the spread of diseases the Center for Disease Control (CDC) recommends that potential problem areas be isolated and the air purified by portable, HEPA air filtration equipment. OmniAire and OmniAire PAC portable HEPA air filtration machines provide a clean air supply necessary to protect the public in gathering areas such as schools, emergency shelters or temporary healthcare facilities. To comply with CDC guidelines to prevent the spread of disease and contamination of sensitive areas, OmniAire HEPA air filtration machines are commonly used to: -Create a negative air pressure in isolation containment -Supply purified air for required air changes (ACH) -Sanitize airflow in operating and patient’s rooms -Purify air in waiting rooms and public areas -Prevent contamination in compounding pharmacies

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Ozone generators for health application

    Ozone therapy was found to be efficient, easy to use, ensuring good tolerance and no sideeffects. According to the chosen therapeutic concentration ozone can produce its immune-modulating, anti-inflammatory, bactericidal, virucidal, fungicidal, analgesic and other effects.

    By Absolute Systems Inc. based in Edmonton, ALBERTA (CANADA).

  • Tunnel Structural Health Monitoring Systems

    Structural Health Monitoring allows rapid assessment of a tunnel’s state of health and such approach is becoming recognized as an appropriate mean to increase the safety and optimize operational and maintenance activities of tunnels. Data resulting from the monitoring program is used to improve the operation, the maintenance, the repair and the replacement of the structure based on objective results. Detection of ongoing damages can be used to discriminate deviations from design performance. Malfunctioning tunnels can often have serious consequences. The most severe are failures involving human victims. Even when there is no loss of life, populations suffer if the structure is partially or completely out of service. Learning how a tunnel performs in real conditions will help design better structures for the future. This can lead to cheaper, safer and more durable structures with increased reliability, performance and safety.

    By Roctest - part of Nova Metrix LLC based in Saint-Lambert, QUEBEC (CANADA).

  • Traffic noise monitoring

    Traffic noise impacts millions of people at home and at work. Traffic noise can impact your ability to work, learn rest, play, relax, and sleep. This form of noise can also lead to mental and physical health concerns. The noise is dependent upon such issues as: Traffic volume. Traffic Speed. Vehicle Content. Road Surface. Surrounding Area.

    By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).

  • EcoTex laundry systems for senior care

    Faced with soaring utility costs and the high risk of infection spread, senior care laundry facilities can benefit greatly with an EcoTex ozone system. With an EcoTex System in place, a laundry room can achieve superior disinfection, reducing energy consumption, increasing wash quality, extending linen life, and be environmentally green. An EcoTex Laundry System starts saving money and improving wash quality the moment it’s installed. Much of the savings stems from reducing wash temperatures from 180o F to 50o F and cutting a laundry’s operation from eight hours to six hours per day.

    By ClearWater Tech, LLC - part of Aquion, Inc. based in San Luis Obispo, CALIFORNIA (USA).

  • Trapped Key Interlocks for Ports

    Interlocks can be used in many process or procedural systems within Ports involving the transmission of electricity, including crane movement, Ship to Shore power, and local substations or backup generators. KIRK type DM locks with chain that are attached to medium voltage connectors located in quayside vaults ensure proper procedure is followed when connecting shore to ship power. These MV connectors feed the ships with crucial electricity, enabling diesel on-ship generators to be switched off whilst in dock, also known as cold ironing. The upstream breakers feeding the vaults are equipped with KIRK® type F locks, which are keyed to correspond to the interlocks on the vault cover or connectors. This ensures power is disconnected before the connectors can be engaged or disengaged, prohibiting operations under load.

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

  • Premium

    Air quality monitoring for health protection

    Vertical pollution monitoring at different levels of a high rise building can reveal exposure of inhabitants to pollution and inform guidance about ventilation.

    By AQMesh based in Stratford-upon-Avon, UNITED KINGDOM.

  • Air monitoring equipments for workplace and personal exposure monitoring

    Many occupations involve the use of hazardous substances or processes, where pollutants may be ingested, inhaled or absorbed through the skin. General ambient pollutants can also have health implications in otherwise non-hazardous workplaces. Occupational exposure limits regulate many pollutants based on an eight-hour working day. Personal exposure assessments can be made over an eight-hour period (Time Weighted Average (TWA) exposure) using our simple to use monitoring equipment.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Pipeline Monitoring Systems for Health Monitoring

    Pipeline management presents challenges that are quite unique. Their long length, high value, high risk and often difficult access conditions require continuous monitoring as well as an optimization of maintenance interventions. The main concern for pipeline owners comes from possible leakages that can have a severe impact on the environment and put the pipeline out of service for repair. Leakages can have different causes, including excessive deformations caused by earthquakes, landslides or collisions mobile objects, corrosion, wear, material flaws or third party intrusion.

    By Roctest - part of Nova Metrix LLC based in Saint-Lambert, QUEBEC (CANADA).

  • Premium

    EH&S Regulatory Compliance Management for Healthcare Industry

    Providing high quality patient care gets tougher all the time, thanks to increasing cost pressures and an ever-changing compliance landscape. 3E`s powerful suite of outsourced services can be tailored to assist any healthcare organization in maintaining compliance and improving EH&S performance. 3E`s services have been proven to deliver cost savings for satisfied customers at thousands of healthcare locations.

    By 3E Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Sound Instrumentation for Measuring Sound

    What is the difference between sound and noise? Clearly more than the loudness only. Although an aircraft is very noisy, a mosquito at night-time can be more than enough to spoil a good night`s sleep. Instead of looking at the loudness only as a criterion for the degree of noisiness, we shall simply regard noise as what it is - viz. unwanted sound.

    By Norsonic AS based in Lierskogen, NORWAY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you