Only show results available in Virginia? Ok

safety container Applications

  • Secondary Containment Storage

    By Steel Tank and Fabricating Corp. based in Columbia City, INDIANA (USA).

  • Spill containment for hazmat / fire/ emergency response

    The Safeguards line of containment products are used by first responders; HazMat teams; and industrial emergency response personnel. Nationwide our products are used for needs ranging from leak containment; spill response absorption, leak diversion, storm drain diversion, HazMat decon and portable water tanks for remote Forest Fire fighting.

    By Millennium Enterprises, Inc. (MEI) based in Marietta, GEORGIA (US) (USA).

  • Trapped Key Interlocks for Lockout Tagout Procedure

    Enhancing your lockout tagout procedure with KIRK trapped key interlocks ensures energy isolation procedures are followed in a predetermined sequence of events every time. Typical industrial equipment may contain hot fluids, blades, fans, pinch points, and moving parts hazardous to workers and other equipment. A written lockout tagout procedure is used to document the steps to remove/isolate the energy source(s). This written procedure includes; identifying the energy source(s), isolating the energy source(s), locking and tagging the energy source(s), and verification that the energy isolation has been effective.

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

  • Premium

    Pressure Monitor use in a Containment Area

    When using negative pressure containment, it is important to monitor the pressure inside the containment in reference to the outside area. However, because the typical negative pressure required is usually only 0.020”WC, it can be difficult to find equipment sensitive enough to measure and monitor your containment area. Omnitec Design has two options to meet this need. Both the Watchman Differential Pressure Monitor and the self-contained Omniguard 4 Pressure Recorder are designed to provide highly accurate monitoring and alarm functions while still being easy to setup with a simple push-button calibration. A pressure monitor is a very important tool that can help ensure the integrity of a containment. Dealing with hazardous debris from abatement/remediation jobs can be a sensitive task that demands safe practices by workers to guarantee their safety, and those who may come into contact with potentially harmful material.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Gas monitoring instruments and systems for fumigation

    Sea cargo containers and wooden packing materials are fumigated to control the spreading of pest animals and micro-organisms. Fumigant gases are toxic and measurements are carried out as a health and safety precaution. Measurements are required by e.g. customs inspectors prior to opening containers, making the shipping companies responsible for carrying out measurements. Products shipped in containers may release VOCs from e.g. solvents and glues used in manufacturing process. The concentrations of vapors may be significant in the confined space of the container. While most containers originate in China and Southeast Asia, cargo container measurements are done in ports across the world, as the same gases are encountered in all ports.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Abatement and Remediation

    Containment and safety issues are a critical consideration when working on any mold, asbestos, or lead remediation/abatement projects. Improperly contained, the dust and bio-contaminants released can, be very harmful for both on-site workers and occupants in neighboring areas. Exactly how you approach your containment and capture solutions will depend on the individual site’s risk assessment report. If you need help identifying solutions to the issues raised in the report, feel free to contact our customer service department and we can review your options together. In most cases, however, there are four common considerations that will be relevant: -Meeting Containment and Air Change Requirements -Monitoring of Containment Pressure -Sterilization of Filtered Air -Removal of Odors, Mold Spores, VOC’s and other Airborne Bio-Contaminates

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Disaster and Epidemic Response

    Anywhere there is a large gathering of people, respiratory infections can be acquired due to exposure to airborne pathogenic microorganisms. To help prevent the spread of diseases the Center for Disease Control (CDC) recommends that potential problem areas be isolated and the air purified by portable, HEPA air filtration equipment. OmniAire and OmniAire PAC portable HEPA air filtration machines provide a clean air supply necessary to protect the public in gathering areas such as schools, emergency shelters or temporary healthcare facilities. To comply with CDC guidelines to prevent the spread of disease and contamination of sensitive areas, OmniAire HEPA air filtration machines are commonly used to: -Create a negative air pressure in isolation containment -Supply purified air for required air changes (ACH) -Sanitize airflow in operating and patient’s rooms -Purify air in waiting rooms and public areas -Prevent contamination in compounding pharmacies

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Gas monitoring instruments and systems for nickel refining

    The mining industry uses chemicals as ‘flotation’ agents in the recovery of sulphide minerals containing metallic elements (e.g., copper, nickel, silver, gold) from ore slurries. Sodium ethyl xanthate (SEX) is one of most common flotation agents, and it decomposes to form ethanol, carbon disulfide CS2, and Carbonyl Sulfide COS. These harmful gaseous compounds must be monitored from the indoor air at the enriching plant.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Contaminated Water Filtration

    Industry standard best practices are designed to ensure that all work done on Asbestos Abatement Projects is done to the highest level of safety and risk management. Containment of the generated waste water fibers and debris is critical to proper compliance and worker safety. If these fibers are not captured and contained, they can be very harmful for the environment, on-site workers and the occupants of neighboring areas. Exactly how you approach your containment and capture solutions will depend on the individual site’s risk assessment report. If you need help identifying solutions to the issues raised in the report, feel free to contact our customer service department and we can review your options together. Water from showers at Asbestos Abatement sites is often contaminated with asbestos fibers from washing protective gear and equipment. This water must be filtered prior to discharge into a drain.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Laser & Plasma Cutting

    Laser & Plasma Cutting fumes are Unbreathable. Using laser or plasma cutting equipment on either metals or plastics introduces several known carcinogens, such as fused silica and ethyl acrylate, into the air. Occupational Health and Safety organizations recommend reducing personal exposure to the lowest level feasible. Hand held plasma cutting provides metalworkers with a quick and fast way to cut large sheets of metal material. However, plasma and oxy cutting generate a large amount of sparks, slag and fume which can contain different pollutants depending on the type of material being cut. Diversitech's line of downdraft tables incorporating the plasma cutting kit are designed to extinguish the sparks and slag, using heavy duty steel bar grating and a gravel filled baffle tray while the blower pulls away all of the toxic plasma cutting fumes. When considering how to capture and filter the fumes generated from large CNC plasma cutting and laser cutting machines, a large central dust

    By DiversiTech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you