Only show results available in Virginia? Ok

safety hazard Applications

  • H series

    to sterilize and reduce medical waste

    By OMPECO srl based in Moncalieri – Torino, ITALY.

  • RCRA Waste Processing

    With over 40 million tons of recycled waste in the U.S. each year, operators are fervently searching for innovative methods to treat and dispose of RCRA wastes. Vulcan® Systems' thermal desorption technology is a proven method for recycling RCRA wastes in a manner that is efficient, affordable, and compliant with the Resource Conveservation and Recovery Act of 1976. The technology devolatizes hydrocarbons and captures them in a condensor for potential use in fuel blending, while also allowing the delisted end product to be disposed of in a more safe and secure manner. According to the EPA's website, "[the] EPA tried to develop hazardous waste regulations that balance the conservation of resources, while ensuring the protection of human health and the environment." Vulcan® Systems' technology meets the EPA's regulations to ensure that hydrocarbons can be re-used and, RCRA Waste, now delisted, can be appropriately disposed of without damage to the environment or public health.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Premium

    Hazardous chemicals management for the health care industry

    By RegScan, Inc. based in Williamsport, PENNSYLVANIA (USA).

  • Premium

    Gas monitoring instruments and systems for HAZMAT

    Accidents involving chemicals and other hazardous materials require fast and accurate gas measurements as part of the first response. The Gasmet™ DX4040 portable FTIR Gas Analyzer provides reliable identification and concentration measurements of hazardous gases in 60 seconds or less.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Rugged Mobile Technology for Hazardous Areas

    You could say that all the work our computers do is environmental work, since holding up to any environment is exactly what these handhelds are made to do. No matter the environment, our devices have you covered.

    By Handheld Group AB based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Recycling equipments for shredding hazardous waste

    The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    AutoChem - Process Safety

    Detect Thermal Hazards Early and Design Safety Into The Chemical Process. We must ask ourselves: How much heat will be generated under normal conditions? How will a change in condition, controlled or uncontrolled, change the rate of heat generation? Can our process equipment handle removing the heated generated? Answering these questions with speed and accuracy is necessary to ensure safe and efficient design and scale-up of synthesis reactions.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Safety incident tracking

    So you have a job that requires you to be involved in hazardous areas? Does your company promote high standards of safety culture? Are you regulated by the EPA, OSHA, and other federal, state, and local agencies? Documenting non-conformances and incidents in disparate static spreadsheets and home-grown solutions is not enough to meet most requirements. You need a centralized safety solution that also allows for detailed evaluations of root cause, corrective action tracking and trending performance so you can mitigate future risk and address systemic issues in the workplace. Perillon Workspace provides a comprehensive and powerful tool to quickly and efficiently identify trends, issues, and problems related to safety.

    By Perillon Software Inc. based in Acton, MASSACHUSETTS (USA).

  • Premium

    Air sampling & monitoring systems for occupational health & safety industry

    HI-Q considers the responsibility for worker health and safety to be of paramount importance. This is a responsibility that requires good documentation of facts. Many studies are conducted to evaluate workplace health and safety conditions as they relate to workers exposure to radiation, chemicals, and biological hazards during the normal work day. HI-Qs wide line of air sampling equipment, systems and accessories are used in the monitoring then documentation of these workplaces.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Trapped Key Interlocks for Substation Switchgear

    Trapped key interlocks have a number of functions in substation switchgear applications. For example, preventing the paralleling of two energy sources, preventing particular operations until a breaker is locked open or closed, preventing disconnecting of breakers under load, and minimizing the possibility of a hazardous arc flash. These are often part of a larger trapped key interlock system.

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

  • Trapped Key Interlocks for Lockout Tagout Procedure

    Enhancing your lockout tagout procedure with KIRK trapped key interlocks ensures energy isolation procedures are followed in a predetermined sequence of events every time. Typical industrial equipment may contain hot fluids, blades, fans, pinch points, and moving parts hazardous to workers and other equipment. A written lockout tagout procedure is used to document the steps to remove/isolate the energy source(s). This written procedure includes; identifying the energy source(s), isolating the energy source(s), locking and tagging the energy source(s), and verification that the energy isolation has been effective.

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

  • Premium

    Laboratory Weighing - Hazardous Area (Ex) Weighing

    Are you continuously seeking to improve your safety, health and environmental standards, while striving for increased productivity and product quality? With METTLER TOLEDO’s solutions for hazardous areas, apparent contrasts turn into one set of standards. Our wide selection of intrinsically safe weighing systems includes balances, indicators and accessories, weighing modules, and weighing platforms of several sizes, shapes and capacities.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Automated solutions for the hazardous waste pit dredging

    Liquid Waste Technology’s electric and diesel driven dredges can improve safety for workers dredging hazardous materials. Our custom built dredges can be equipped with remote control to allow workers to stand up to 762 meters (2500 feet) away from the toxic area, increasing their safety. Liquid Waste Technology can build dredges with automated controls, that dredge entire ponds using PLC controls. This increases workers safety and productivity in hazardous dredging applications.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Air monitoring equipments for workplace and personal exposure monitoring

    Many occupations involve the use of hazardous substances or processes, where pollutants may be ingested, inhaled or absorbed through the skin. General ambient pollutants can also have health implications in otherwise non-hazardous workplaces. Occupational exposure limits regulate many pollutants based on an eight-hour working day. Personal exposure assessments can be made over an eight-hour period (Time Weighted Average (TWA) exposure) using our simple to use monitoring equipment.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Measurement solution for medical workplace monitoring

    In taking a responsible stance on the exposure of workers to any potential hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air. Anaesthesia machines, ventilators, breathing systems and waste gas scavenging systems will all contribute to te background level of he anaesthetic gases that are present in the environment within a facility, whether those machines are in a good state of repair or not. Recovery rooms can become polluted, for example from gas exhaled by the patient, and clean-up from any spills can remain in the background air for long periods.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you