Sampling Equipment Applications on Environmental XPRT

Premium

Sampling and drilling equipments for the environmental industry

Environmental consultants, engineering firms, and researchers in the environmental industry use AMS products for a variety of sampling, testing, and monitoring needs.

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

Premium

Sampling and drilling equipments for the mining industry

AMS, Inc. has been a leading provider of high quality sampling equipment since 1942. AMS sampling equipment is primarily used for environmental, geotechnical, and remediation uses as well as soil, soil gas, and groundwater monitoring. In addition, AMS makes PowerProbe direct push/hollowstem auger drill rigs for environmental and geotechnical drilling activities. AMS also manufactures and offers direct push tooling, drilling equipment, accessories, and expendables for soil sampling, groundwater sampling and monitoring well installations.

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

Premium

Sampling and drilling equipments for the construction industry

Constructions.

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

Premium

Sampling and drilling equipments for the pest control industry

AMS, Inc. offers installation equipment for bait station and monitoring stations for the pest management technician who wants the ultimate fit and finish.

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

Air Quality Monitoring Equipment for Sample Handling Industry

Within the field of gas analysis much time is spent looking at the accuracy and uncertainty in the detection technique. However, without appropriate sample handling, what you are measuring could potentially bear little or no relation to your original sample.

By Signal Group Ltd based in Camberley, UNITED KINGDOM.

Premium

Personal air sampling

Bodily worn equipment and associated accessories and sampling media for undertaking personal air samples onto media which is then further analysed. Used for measuring employees` exposure to dusts, fumes, gases or vapours

By Casella based in Kempston, UNITED KINGDOM.

Gas control equipment for Life Science

QCAL introduces CO2Control for incubators and test chambers. These gas dosing units can be adapted to nearly every incubator or test chamber. The user can set a CO2 concentration up to 30% vol. CO2. The CO2Control measures the actual concentration and adds CO2 from a CO2 gas container. The NDIR CO2-sensor has an excellent long-term stability, which provides years of stable CO2 measurement. Also the other parts as the sample gas pump, valve and fittings are designed for maintenance-free use over years. Humidity effects are compensated upto 95% rh at 37°C, also temperature effects are automatically corrected upto 50°C. The other way to control gas atmospheres in any life science equipment is to use gas mixing units GMS_2CH ( 2 channels ) or GMS_3CH ( 3 channels ) for N2, O2 and CO2. They can match flowrates up to 80 liters per minute with a concentration range up to 100 Vol% O2 and/or CO2.

By QCAL Messtechnik GmbH based in Oberostendorf, GERMANY.

Air monitoring for laboratories

Many of the air quality analyses can be performed with standard laboratory consumables, such as traditional filter papers. However, some analyses require materials with specific features, for example filters with low metal levels.

Common air monitoring applications include:

Air quality testing of ambient environment and emissions. Includes particulate monitoring methods such as PM2.5 and PM10, and chemical analysis such as heavy metals determination.
Asbestos sampling and analysis

By GE Healthcare UK Limited based in Little Chalfont, UNITED KINGDOM.

Premium

Air sampling & monitoring systems for commercial nuclear industry

Since 1973, HI-Q has directly and successfully served the commercial nuclear industry worldwide with reliable, High Quality (HI-Q), continuous duty air sampling equipment, systems and accessories. For over 30 years, our products, professional design capability, and consumables have been used in remote & internal air monitoring programs including stack sampling system designs which implement the “shrouded probe” per ANSI N13.1 1999 design specifications.

By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

Air and particule sampling for the oil and gas industries

Ormantine offers a wide range of products and services to meet the array of different needs that arise in the oil and gas industries. Volatile Organic Compounds (VOCs), benzene, and other compounds are released during drilling, hydraulic fracturing (fracking) and other extraction procedures. Monitor NOx emissions from heavy duty equipment, particulate matter, and ground level ozone, the formation of which is contributed to by VOCs from processing, transportation, and storage of oil and gas.

By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

Premium

Machine condition monitoring for labs & services

Overview

Machine condition monitoring using oil analysis is widely practiced by virtually every segment of modern industry that maintains large, expensive, oil-lubricated machines. In many cases, especially in smaller plants or enterprises, samples are sent to commercial oil analysis laboratories that can help monitor machinery health.

By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

Premium

Laboratory Equipment Solutions for Soil Analysis

MANTECH offers world class laboratory equipment allowing you the flexibility to test your soil samples all the way up to 197 individual positions! Our tests cover Alkalinity, Ammonia, Chloride, Nitrate and pH for soil samples. Learn more about our world class laboratory equipment and applications at http://mantech-inc.com/application-abstracts/agriculture-and-soil-application-abstracts/

By MANTECH based in Guelph, ONTARIO (CANADA).

Premium

Specialty Cleaners and Lubricants for Laboratory Industry

We manufacture and supply high quality laboratory cleaners. Whether you need to remove biological debris, fingerprints, protein, starch, or dye, our products provide consistent results. Our laboratory cleaners are excellent for use on flasks, pipettes, slides, stainless steel, plastic, and other laboratory equipment and surfaces. When rinsed properly, our cleaners leave absolutely no residue. Validation information is available. For most applications a 0.5% - 2.0% solution is effective. Charlie Troxel, Product Manager at LI-COR Biosciences includes a sample of Micro-90 with each DNA sequencer the company ships: `We have found your Micro-90 Concentrated Cleaning Solution to be unsurpassed in removing gel debris and fluorescent residue from our sequencing plates. Since clean gel plates are so critical to high quality sequence data…we feel that introducing our customers to Micro-90 will help them maximize the performance of their DNA Sequencer.`

By International Products Corporation based in Burlington, NEW JERSEY (USA).

Measurement solution for multi-stream combustion research

Protea supplied a complete turn-key measuring system for multi-point sampling in a University combustion research laboratory. Utilising the latest in FTIR spectroscopy, atmosFIR, a complete cabinet system was supplied containing: atmosFIR FTIR Gas analyser, Sampling System Control Module (SSCM), Heated Stream Selection Module (HSSM), Temperature Control Module (TCM), 4 heated sample lines, 4 heated sample probes, Embedded PC controller.

By Protea Limited based in Middlewich, UNITED KINGDOM.

Premium

Air sampling & monitoring systems for universities, colleges & professional schools

HI-Q realizes and supports the efforts of higher education with a variety of air sampling equipment, systems and accessories. Many of instruments are used as teaching aids for future Health Physicists, Radiation Safety Officers, Industrial Hygienist, Environmental Engineers and other industrial disciplines.

By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

Premium

Air sampling & monitoring systems for occupational health & safety industry

HI-Q considers the responsibility for worker health and safety to be of paramount importance. This is a responsibility that requires good documentation of facts. Many studies are conducted to evaluate workplace health and safety conditions as they relate to workers exposure to radiation, chemicals, and biological hazards during the normal work day. HI-Qs wide line of air sampling equipment, systems and accessories are used in the monitoring then documentation of these workplaces.

By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

Premium

Analytical and measuring instruments of shimadzu cannabis testing solutions

Shimadzu`s Cannabis Testing Solutions cover a broad range of applications, from potency testing to pesticide screening. We supply the instruments, methods and experience necessary to get you up and running quickly. Shimadzu scientific instruments have been applied to natural products, food sciences, pharmaceuticals and environmental testing for decades. Whether you are a chromatography expert or a novice, our platforms and training ensure that your laboratory will generate quality results from a wide variety of cannabis samples. Our easy to use platforms save you time and money, maximizing the profits of your laboratory. Shimadzu can help you with your QA/QC testing, peak harvesting analysis and cannabis research.

By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

Premium

TPH in Soil Remediation

InfraCal TOG/TPH Analyzers allow for TPH (Total Petroleum Hydrocarbons) in soil testing at remediation sites such as leaking underground storage tanks and produced water evaporation ponds. Site managers can avoid having costly soil remediation equipment sit idle while waiting for off-site lab results. Sampling requires a few simple steps that can be performed by non-technical personnel. The soil is mixed with the extraction solvent, shaken, filtered, and then presented to the InfraCal Analyzer for measurement. Features include: - Results in under 15 minutes, including extraction ¨ Detect levels as low as 10 ppm ¨ Portable, rugged, lightweight, easy-to-use ¨ Battery operable ¨ Ideal for field or laboratory applications ¨ Factory calibration available

By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

Saran Bag application

Title : Preliminary Sampling Methodology and Analytical Procedures for Ambient Sulfur Hexafluoride, Corporate Author : ARMY MEDICAL ENVIRONMENTAL ENGINEERING RESEARCH UNIT EDGEWOOD ARSENAL MD Personal Author(s) : Luckan,Susan K. ; Cooper,William J. Report Date : JAN 1973 Pagination or Media Count : 23 Abstract : A preliminary evaluation of techniques of sampling and gas chromatographic analysis for low levels of sulfur hexafluoride was conducted to determine the most feasible method for available equipment. Using a Tracor MT-150 gas chromatograph equipped with Nickel 63 electron capture detector and polarized dc voltable, it was possible to detect sulfur hexafluoride at a concentration of 0.06 ppb with a 5A molecular sieve column and nitrogen carrier gas, without preconcentration of the sample. Also, a comparison of glass and Saran sampling materials proved that no detectable loss of the tracer gas resulted with the Saran bags (between 6 ppm and 0.06 ppb SF6

By Analytical Specialties, Inc. based in Elburn, ILLINOIS (USA).

Monitoring of VOCs in Porewater

Monitoring VOCs in porewater in the unsaturated zone is now possible.

Sorbisense regularly offers new options for using the patented Sorbicell, which is used to monitor surface water, wastewater and groundwater.

The latest is almost as “ground-breaking” as the SorbiCell itself. Until now it has been difficult, if not impossible, to directly monitor for volatile substances in pore water in the unsaturated zone. But the environmental consultancy firm Ejlskov A/S in Aarhus combined the use of Sorbisense sampling equipment with the proven technology of soil water samplers. With this combination, a practical new method is made available, which allows for monitoring the presence of porewater-dissolved VOCs above the groundwater table. This provides a significantly improved basis to define and determine the leaching risk to the groundwater, and thus allows for better and more cost-efficient decisions to prevent the pollution in reaching the groundwater.

A simple construction with multiple options

The application uses SorbiCell VOC combined with suction cells, soil water samplers. When installed correctly, and applied with the correct procedures, the suctions cells extract capillary bound water from the soil matrix. The system demands no other resource than a container that is put under vacuum. The vacuum in the container then ensures a flow through of the Sorbicell over a period of time, fx. 2-3 weeks. The method is highly suitable for monitoring a site over longer periods of time.

By Sorbisense A/S based in Tjele, DENMARK.

Subscribe to our eBulletins

Add Supplier Profile