Only show results available in Virginia? Ok

scrap metal processing Applications

  • Premium

    Scrap Metal Recycling

    Recognized as an industry leader in shredder recycling, we operate 50 recycling facilities for metal, green waste, plastic, food waste, rubber, tires, RDF waste. Harden’s facilities are designed with safety and efficiency in mind for both employees and customers. Our equipment is maintained and updated regularly and our scales are calibrated quarterly. The properties of metals provide unique benefits and advantages for their recycling. Unlike other recycled materials, such as paper and plastic, metals can be repeatedly recycled without degradation of their properties. Metals from secondary sources are just as good as metals from the primary sources. The scrap metal recycling lines are extremely heavy duty systems designed for processing scrap steel, electronic waste, aluminum castings and profiles, ect. We offer both medium and high capacity plants which benefit from low maintenance & operational costs, and lower capital investment when compared with the traditional systems.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Recycling equipments for shredding scrap metals

    Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft shredders break bales or briquettes of pre-processed metal scrap for final size reduction and separation for reclamation or re-melting, allowing for recovery and reuse of the metals. Integrated systems include grinders and hammer mills for producing small size or powdered materials for reuse.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • e-scrap recycling System

    PCB Boards and E-scrap Recycling Plant 3.Why buy MINGXIN's E waste(PCB) Recycling plant ? Get the metal separated from waste circuit board through crushing and air separation process. No incineration and pollution. compliance with EHS standard, no harmfulness to workers, eco-friendly solution for E waste recycling. The plant has 5 advantages: A. The coarse crush can grind baseplate and separate electronic component.. B. National Environment Protection Standard achieved. No dust leak and no secondary pollution . C. Low energy consumption but high production. D. High metal recovery rate which reaches 97%-99%. Metal content in on-metal powder is less than 1%. E. Patent number: ZL02247015.8

    By Jiangxi Mingxin Metallurgy Equipment Co.,Ltd. based in Shicheng County, CHINA.

  • Scrap Shear 600T/1000T/1500T

    Capable of Daily 24 HRS Operation - 1000T Model Capacity of Light Scattered Scrap Iron - Over 20t/hr - Economical & Versatile for wide range of scrap types - High Efficiency Performance - Capable of Daily 24 HRS Operation#11; - Cylinders Remove & Repair : No Need#11; - Blade Clearance: Adjustable - Built-In Steel Oil Pipes – No damage by outer force - Cylinders - SGS-CE Qualified#11; - Advanced Technology Applied#11; - Top & Side Pre-Compressing Process#11; - Cycling Auto-Cutting: Only one operator required#11; - Excellent Capacity Assurance#11; - Lowest Electricity Consumption - Lowes Operation Cost - Qualified Materials in Production - Ultra Strength Structure: Wear-Resistance Steel -Protection#11; - Easy & Economical Maintenance#11; - Extremely Long Life Span - Runs well over 30 years - Smart Move of Feed Tank Impeller - Roller Wheels Built In - Blade & Holder Protection : Thick Steel Blade Sheaths Built In - Unique Screwed Blade Assembly [ Easy to Replace the Blade ]

    By Hua-Wei Machine Taiwan based in Taipei, TAIWAN.

  • Premium

    Recycling equipments for ferrous scrap metal shredding & recycling

    Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional Granutech machinery such as the MAC Magnum Logger, or MAC Big MAC auto crusher can compact and densify larger ferrous items reducing transportation costs.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Harden Shredding Technology for Metal-processing Industry

    Harden Shredding Technology for Metal-processing IndustryMetal waste may be comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! The processing of scrap metal is strongly related to steelworks and, therefore, it becomes fundamental to deliver uniform material with a high specific weight. Harden scrap metal shredders are perfect parallel to shearing machines for volume reduction, hence qualifying the material as shovelable, but are also applicable upstream of the hammer mills, facilitating the work in terms of safety, wear and electricity consumption. The main fields of application are: • Light waste collection • Collection in packages • Unmodified or packaged automobiles (including with engine) • Rolling mill trimmings • Sheet metal • Oversized metal items (cabinets, etc.)

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Reliable Shredding Technology for Electronic Scrap

    Our customized solutions enable you to efficiently shred electronic scrap in your recycling facility and they align perfectly with your recycling system. The granulate size is adjusted such that metals and non-metals can be separated and recycled as best as possible. More than 40 million tons of electrical and electronic scrap are generated annually – and the trend is growing dramatically! Recycling electronic devices is not just beneficial for environmental reasons. This scrap, as a rule, contains many precious metals that are recovered during the recycling process. To ensure a high yield during the recovery process, the shredding should generate only a very low amount of fine particles.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Metal cutting for the metal recycling industry

    Because metal scrap arrives for re-melting in many forms, it must first be processed. Heavy, bulky scrap should be densified and sheared in a guillotine scrap shear.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Premium

    Application for slow speed metals processing shredding

    SSI offers a variety of low-speed, high-torque shredders for volume reduction and recovery of ferrous and non-ferrous scrap metal materials.. Metal processing is a great application for slow speed shredding technologies. SSI has many customers processing metals all around the world.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez recycling team assists recycled material processors, material recycling facilities alike in improving product quality and recovering valuable commodity. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • XRF analysis for positive material identification

    Positive Material Identification, or PMI, is an integral part of process safety management in many industries including the petroleum refining and petrochemical. Whether the need is quality control, sorting of scrap material, or even failure analysis, materials testing to provide verification of metal alloy grade and composition is crucial to the success of many businesses.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Continuous Gravimetric Feeding for Coal Mining Industry

    Applications in coal mining, the processing of non-ferrous metals, costeaning and preparation in mines require technology and materials capable of withstanding the most extreme conditions. Schenck Process solutions prevail where others give up. Our products are durable, indestructible and extremely reliable under the most difficult conditions.

    Whether large lumps or the finest fragment, wet or dry and irrespective of whether using ore, scrap, lime powder or hot sinter up to 1,000 °C – vibratory equipment supplied by Schenck Process can deal with all types of bulk materials. Every year around 10 million tonnes of raw coal are freed of impurities with the help of our coal washing plants – which represents our contribution to environmentally friendly energy production.

    Our customised application solutions include both heavy-duty and static weighing technology, conveying, screening, drying & cooling and dewatering. From planning and design through to the construction of the plant sections, reliable controls and connection to data systems.

    By Schenck Process Group based in Sandnes, NORWAY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you