Only show results available in Virginia? Ok

screening equipment Applications

  • Recycling Equipment for Screening Solutions

    Environmental requirements and an ever-increasing demand for accurate screening require versatile and reliable mobile screening machines. Lubo`s mobile screening solutions are especially designed for that purpose; They have a high processing capacity, deliver a high percentage of `clean` output materials, and  are suitable for practically all work sites, including the smaller ones. making them one of the most compact and reliable mobile screening machines available on the market today.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Premium

    Environmental testing & compliance screening for energy/environmental sector

    Compliance screening and testing is often carried out during the manufacturing phase of a product, and all the way through its disposal or recycling process. It ensures that products and materials meet specific standards or comply with international and local directives or regulations. These standards and regulations are introduced to ensure the quality and safety of a product, and to minimise or eliminate its negative impact on the environment and people. Examples of products or materials tested are: electrical and electronic equipment (for compliance with the Restriction of Hazardous Substances (RoHS) directive), waste oils, soil (soil remediation depending on contents of toxic metals), children’s products (for compliance with Consumer Product Safety Improvement Act of 2008), etc.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Industrial solutions for food and beverage industry

    Water is a precious and crucial resource in the process of food and beverage production. From screening to tertiary treatment, biological nutrient removal to water reclamation, WesTech equipment is designed to maximize efficiencies and minimize downtime, all while meeting the ever-tightening EPA regulations.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Municipal wastewater solutions for preliminary treatment industry

    Removing solids and grit plays a crucial role in protecting pumps and other equipment in a treatment facility. WesTech is your single source for headworks equipment to maximize your screening, washing, dewatering, grit removal and grit washing.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Mining & minerals solutions for sand aggregate industry

    WesTech provides process equipment for the sand aggregate industries including thickeners, screening and separation, and mixing technologies which provide for production of cement, and a myriad of materials for the construction industries.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Sewer Overflow Management

    High-performance screen rakes for spillway structures and weir conduits and channels. Storm-water basin equipment including control systems. Controlled overflow weirs, also combined with screen rakes.

    By ROMAG aquacare ag based in Duedingen, SWITZERLAND.

  • Organic waste recycling for the composting industry

    Vermeer and Wildcat have led the way into these new industries with organic recycling equipment that processes organic waste quickly and efficiently, so that it can be turned into useful end product. Vermeer compost turners, horizontal grinders, tub grinders and Wildcat compost turners and trommel screens are built to last and fully supported with parts and service from your local dealer. 

    By Vermeer based in Pella, IOWA (USA).

  • Crusher for Bauxite Industries

    Bauxite crusher for sale; Bauxite is one of the most valuable mineral reserves a country can have, given the modern day demand for aluminium. DSMAC is a famous manufacturer of crushing and screening equipment and provides series stone crusher and crushing equipment for customers. Now let us know more information about DSMAC bauxite crusher.

    By DSMAC Group based in Zhengzhou, CHINA.

  • Powerline - Commline Inspection

    Radiographic NDT testing of a power line is no simple matter. The power line`s electric cables need to be inspected for wear and tear as a routine procedure. Elevating the radiographic NDT equipment to the necessary heights presents a serious problem. Our digital portable radiography systems combine high mobility with cutting edge X-ray technology. Highest quality images are created upon request and are immediately available on screen for analysis. The excellent resolution and dynamic range combined with advanced but user-friendly software are the key to the comprehensive field radiographic NDT solution that we offer.

    By Geomorph Instruments based in Piraeus, GREECE.

  • Continuous Gravimetric Feeding for Coal Mining Industry

    Applications in coal mining, the processing of non-ferrous metals, costeaning and preparation in mines require technology and materials capable of withstanding the most extreme conditions. Schenck Process solutions prevail where others give up. Our products are durable, indestructible and extremely reliable under the most difficult conditions.

    Whether large lumps or the finest fragment, wet or dry and irrespective of whether using ore, scrap, lime powder or hot sinter up to 1,000 °C – vibratory equipment supplied by Schenck Process can deal with all types of bulk materials. Every year around 10 million tonnes of raw coal are freed of impurities with the help of our coal washing plants – which represents our contribution to environmentally friendly energy production.

    Our customised application solutions include both heavy-duty and static weighing technology, conveying, screening, drying & cooling and dewatering. From planning and design through to the construction of the plant sections, reliable controls and connection to data systems.

    By Schenck Process Group based in Sandnes, NORWAY.

  • Radionuclide Monitoring for Nuclear Power Plants

    The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant`s radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to obtain a sufficiently large volume through the filter in order to exceed the laboratory methods minimum detection limits. Ecotech`s MegaVol Sampler, samples at a flow rate of between 120-150 m3/hr providing a high flow rate in order to collect a sufficient sample mass for laboratory analysis. The MegaVol will maintain volumetric flow rate at a preset volume until the filter is either changed or overloaded. The MegaVol can be equipped with a 3G modem in order to remotely monitor flow rate and other diagnostic parameters such as temperature, pressure and wind speed and direction.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental Monitoring

    Environmental monitoring is becoming more important every day in local, national and international policies, showing the environmental awareness demanded by society.

    This fact gives rise to an increase in the amount of legislation that obliges companies to law enforcement. Thus, the necessity of making more pollutants controls means high analysis expenses to the companies, which need to subcontract this service.

    Although applications in this area advance, there is still a clear demand to get new portable and versatile analysis systems for many different application fields such as pollution in environmental or waste waters, monitoring nutrients in agricultural or horticultural water as well as general process control in chemistry industry. Because of the number of enviromental analysis required, there is a need for screening and monitoring measurements of these compounds at contaminated areas.

    Traditional monitoring techniques are typically based on laboratory analysis of field-collected samples that require considerable effort and expense, and the sample may change before analysis. Moreover, the equipment currently available is too large and expensive and it cannot be made portable.Alternatively, microfluidic and electrochemical sensor technologies can contribute to the development of new portable monitoring systems, complementing standard analytical methods for different environmental monitoring applications.In this way, the decentralization and integration of all those typical analyses is the paramount importance in order to reduce cost, simplify the analytical process and make more accessible these technologies to end-users. The development of portable, robust, and accurate Lab-on-a-Chip systems to monitor priority compounds such as contaminants, explosives, chemical warfare agents, inorganic and organic ions is a demand of modern society. Portability allows analyses to be carried out outside of the laboratory, minimizing the risk of contaminating the sample and leading to a faster response time at a lower cost.

    Thus, MicruX solutions and technologies open the gate to develop portable and esay-handly Lab-on-a-Chip devices in order to improve pollutants in-situ analysis in a very economic and efficient way.

    By MicruX Technologies based in Oviedo, SPAIN.

  • CUSTOMER CONFIRMS LONGEVITY OF SCALEWATCHER ELECTRONIC WATER CONDITIONER

    Scalewatcher North America, manufacturer of the original, patented and award-winning computerized electronic water-conditioner, states in its literature that the device is produced to last at least 20 years and comes with a 10 year warranty. However, no reports have been received on the longevity of the units sold since the company was launched over 20 years ago. Now a customer in Gilroy, California has come forward requesting a new Scalewatcher unit after the device she purchased in 1992 finally stopped working. She purchased the new Scalewatcher from local dealer, Aqua Genesis, and reported that: “ I noticed that the sprinklers are covering more of an area than before. When I squirt water on the black and white tile patio table there are no longer any calcium spots even if I do not dry it off. The tile shower and the clear shower door are easier to wipe down after my shower. The new ScaleWatcher is much better than before. It certainly was time to replace the old one.” The new, innovative, electronic Scalewatcher water conditioner uses proven technology to quickly and effectively dissolve existing limescale and prevent it recurring, returning water systems and water-fed appliances such as kettles, washing machines and dishwashers to their former efficiency. It also removes scale around faucets, sinks, baths, plugholes and shower roses as well as preventing white marks on shower screens and mould on shower curtains. The system requires no plumbing, chemicals or maintenance and is environmentally friendly. In addition scale costs money for householders through additional cleaning products, the early renewal of water–fed equipment and additional costs to heat water. It is estimated that 40% more energy is needed to heat water in a system fouled with ¼ inch of limescale. Commenting Jan de Baat Doelman, President of Scalewatcher North America says: “We have always built Scalewatcher electronic water conditions to last and this latest information confirms the device’s longevity. Scalewatcher will pay for itself in less than three years and then carry on providing homes with a scale free environment many more years to come. ” Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you