Only show results available in Michigan? Ok

self-cleaning filter Applications

  • Diesel Air Filter Cleaning

    HOW THE GREEN FILTER CLEANING MACHINE WORKS Easy to load, automatic and programmable cleaning cycles, filters cleaned in 3 to 5 minutes. Dry compressed air cleans filters from the inside out. Pollutant dust is safely captured with our powerful cyclone collector than safely stored in a supplied 55gal drum. Filter Inspection Station available, recommended for air intake filters used in Diesel Engines, measure restriction levels of air filters to confirm filters integrity Filter Inner Diameter: 6.5` Minimum for...

    By Diversitech based in Montreal, QUEBEC (CANADA).

  • Dust Collector Cartridge Filter Cleaning

    The Green Filter Cleaning Machine effectively and safely cleans your air filters. The recycling of dirty cartridge filers translates into immediate ROI as filters can be reused 3-6 times, depending on application.? Ideal for cleaning dust collector filters, diesel engine intake filters, or any cartridge with an inner diameter greater than 6.5` and an outer diameter less than 20`. The Green Filter Cleaning Machine will accept filter heights up to 32` (40` extended unit available). The filter cleaning mechanism...

    By Diversitech based in Montreal, QUEBEC (CANADA).

  • Filter technique solutions for the Water recycling and -cleaning sector

    The filtration of the grind sewage takes place in an arrangement of procedure. If necessary, an individual designed Zyklon-container or a "Grobfilter" is associated in combination with in turn connected Zyklonfilters. Policefilter and special flow movements support the process. The size and the version of the plant depends on the customer`s demand and could be completed just as they like.

    By KLASS-Filter GmbH based in Türkenfeld, GERMANY.

  • Premium

    Cleaners for Parts cleaning industry

    We understand how critical it is to get the industrial cleaning done so your plant can continue operating at peak efficiency. Our cleaners remove dirt, grease, oil, metal fines, flux, and other particulates from parts and equipment without the hazards associated with solvents. When rinsed properly our cleaners leave no residue and your precision parts are ready for further processing. Products are available for manual and automated cleaning systems. only qualitative production for all transportAn economical 1-2%...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Air cleaning system for the sports facilities

    For cleaner air in health clubs, gymnasiums, arenas and stadiums, Dynamic Air Cleaners are proven winners. Dynamic Air Cleaners can be found at the UNI-Dome, home of the University Of Northern Iowa basketball and football programs. In a recent IAQ upgrade to reduce the ventilation air into the building, which was constructed in 1976, Cosatini Engineering (Chicago) used the Ashrae 62 IAQ procedure to calculate a reduction of outside air needed in the facility. The original plan was to use 95% cartridge filters...

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • Smoke generator device for clean room solutions

    The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the clean room environment that is being served. Testing is necessary since HEPA filters...

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • WEDA Underwater cleaning robots in lagoons and large fountains

    The new Weda YT-5000 with a five (5) meter wide suction nozzler speeds up the cleaning process considerably. Estimated cleaning speed is up to 3000 sq. meters/hour. The cleaner removes efficiently bottom sedimentation (sand, algae etc.) from the bottom surface and pumps it to a selected discharge point (filter, waste etc).

    By Weda AB based in Södertälje, SWEDEN.

  • Welding Fume Extraction

    Welding fumes & gases are Unbreathable. Nonetheless, welding is perhaps the most common industrial process and necessary anytime the joining of metals is required. Regardless of the welding equipment type or technology, the simple process of melting metal and filler materials creates poisonous fumes and gases. ? Different types of welding processes present unique challenges to adequately handle airborne fumes. Robotic welding equipment and other automated welding systems produce a high volume of welding fumes...

    By Diversitech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you