Only show results available in Virginia? Ok

sensor data Applications

  • Water measurement systems & sensors for rainfall intensity logging

    ISODAQ telemetry systems are low-cost and very ease to use and configure, enabling you to bring your field data to your desktop PC without needing to operate complex IT infrastructure.

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Water measurement systems & sensors for flood warning

    Isodaq’s low-cost Isodaq telemetry data logger RTUs integrated with our telemetry data acquisition and alarm-message forwarding systems together provide the ideal solution for early warning of key events such as floods, pollution or CSO overflows.

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Premium

    Meteorological systems for environmental monitoring

    Climatronics has supplied meteorological systems for environmental monitoring and regulatory compliance for over 35 years. Our accurate, responsive, yet rugged sensors, coupled with high-power data loggers, provide users with the ability to make measurements on multi-level towers, multiple tower networks, and single sites, which comply with EPA, NRC, and international regulatory requirements.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Premium

    Precipitation measurement

    From simple manual rainfall collection devices, electronic tipping bucket rain gauge sensors, through to fully autonomic stand alone data logging systems with telemetry for hydrological network applications.

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Fugutive Emissions Measurement

    Emission Measurement – An estimate of the total fugitive emissions from a site can be determined using environmental data, EPA gas dispersion models, and GasFinder2 sensor data.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Waste Sorting - CRT Glass Sorting

    End of life TV sets and computer monitors require to be recycled to maximise the level of material recovery, and to meet the requirements of the EU WEEE Directive. CRT glass is the largest item by weight. However, because of the 2 different types of glass used in CRT manufacture, the glass fractions have to be sorted to achieve a separation of the 2 type of glass, i.e. panel glass sorted from funnel glass. X-TRACT separator is able to sort the panel glass from the funnel glass. It does it by comparing their different atomic densities, and analysing the data from the X-Rays using a bi-chromatic sensor system. X-TRACT is the first industrial application for any dry mechanical density sorting.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    Multiparameter Monitoring for the Renewable Energy Industry

    Site surveys for tidal, wave and wind based renewable energy projects will require instruments to measure standard physical parameters before, during and post installation.

    Fine tuning of the generating method is also reliant on data from sensor packages to maximise the source energy required for profitable installations.

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Premium

    Hydrographic Surveying

    Key to any Hydrographic survey is tidal data and Valeport offer tide gauge options for both shore based and offshore / seabed applications together with telemetry packages for secure data transfer. 

    Echo sounders, both single and multi-beam need sound velocity data to correctly produce depth measurements.  Valeport offer the largest range in sound velocity sensors and profilers that have world beating accuracy.

    If simple, small boat echo sounding is required with single or dual frequency transducers and interface of external parameters with GPS reference then we have just what you need in our portable Midas Surveyor single beam echo sounder.

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Remote Telemetry / Communications

    GOES.hopper is a fully turnkey GOES satellite-based communication solution for new or existing monitoring stations with SDI sensors. Now you can get groundwater data to your desktop, reducing manpower and site visits.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Premium

    Gas Detection Solutions for GHG Monitoring

    Most sources of fugitive emissions are from multiple points rather than single point sources. So, open path area or perimeter monitoring provides more meaningful fugitive emissions data than an array of point sensors or a program of grab sampling. Point measurements may underestimate emissions because of missing locations with high gas concentrations, or conversely overestimate because they are located in areas of high concentrations. Grab sampling programs typically check only a small percentage of potential leak locations and extrapolate results to an entire facility. Wide margins of uncertainty are associated with such extrapolations. Open path monitoring provides continuously updated, real-time, integrated emissions across a facility boundary.This provides a complete picture of the fugitive emissions across that boundary,enabling identification of specific operations and times that give rise to higher emissions, and so enabling these emissions to be properly managed and controlled.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Disposal and Cleaning Equipment for Waste Water Industy

    Drinking water is not the only area requiring flow monitoring. The disposal and cleaning of waste water also requires flow meters. Waste water used to be dumped directly into the soil or an open channel. As awareness has increased, most discharges are now treated to assure long term sustainability. Modern water treatment plants are highly complex systems that require the use of flow sensors to monitor flow velocity in open channels for waste water discharge. Likewise facilities for waste water collection and clarification plants need regular data on flow rate. The use of radar non contact flow measurement and ultrasonic doppler flow meters are particularly efficient. HydroVision can complete flow measurements in all of these areas.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Multiparameter Monitoring for the Offshore Oil & Gas Industry

     Meeting the demands of small ROV’s to work class vehicles in the offshore oil & gas industry, Valeport have a range of sensors and probes to measure the physical parameters vital to safe operation.  From sensors to aid operation of the vehicle to probes for data input into metrology and construction operations, our “industry standard” packages are designed and built to perform.

    AUV requirements can mean provision of complete housed instruments or OEM style for users own interface.  Our small, low power, accurate and robust sensors will aid AUV manufacturers and users to get the data required.

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Fibre Optic Distributed Temperature Sensing for Borehole Flow Monitoring

    Subsurface environments are critical not only as water resources but also for energy use including geothermal, CO2 sequestration and oil & gas operations. These sensitive environments are directly affected by anthropogenic activities, hence monitoring is essential. Temperature offers insight into a variety of physical properties and can be used for flow monitoring and flux quantification in the subsurface. Traditionally, point sensors have been used to collect temperature data; however, significant limitations exist.

    By Silixa Ltd based in Elstree, UNITED KINGDOM.

  • Electrical Based Tomography Systems for Batch mixing

    Batch mixing generally refers to mixing processes in vessels and ITS tomography instrumentation provides a tool to understand, optimise and control mixing. Tomography sensors take data from between 200 to 2,400 measurement points in a single snapshot, thus providing a sound basis to monitor changes in concentration of different materials and so quantify mixing. Sensors can be retrofitted through using probe based instruments, scanning the z-axis (which usually presents the key challenge to effective mixing). Alternatively, an array of up to 8 circular planes, each with 16 electrodes can be used to provide a more complete picture of the mixing process.

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems offered by Ammonit meet the highest standards of quality and are designed for the local site conditions with regard to sensor performance, communication system and power supply.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Meteo and Wind Monitoring Wind Energy Sector

    The Renewable Energy market is expanding rapidly to reduce the dependency on traditionial energy sources and to reduce CO2 emissions in the future. Mierij Meteo offers sensors and system for many applications in the Renewable Energy market. Mierij Meteo supplies wind sensors for wind turbine control, Automatic Weathers Station for forecasting and robust and accurate sensors for research and power curve measurements (MET masts). By using Mierij Meteo sensors and systems you will ensure optimal of your wind turbines. With our MET masts you will get the most reliable data to help make your investment in renewable energy become more profitable.

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Remote temperature monitoring

    To abide local regulations, and ensure efficient and effective composting, the temperatures of the windrows must be measured and logged constantly. With accurate temperature measurements, you can determine the optimum time to turn the windrows for quicker compost production. Time consuming and error prone manual data collection is eliminated using a SureCross FlexPower Node equipped with three thermocouples to automatically monitor the temperature at three depths within a compost windrow. Temperature sensor readings are wirelessly transmitted back to the Gateway or host system for data collection, analysis, and logging. Because the temperatures are measured and recorded continuously, the composting rows can be turned as soon as the temperature reaches the ideal point. Continuously monitoring the temperature will also provide an early warning to potential fire hazards by notifying personnel when temperatures exceed recommended ranges, thereby preserving the product.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Sewer Meter -

    Sewer Meters monitor sewage level and flow within the sewers. Benefits gained by sewer monitoring include: (1) Detection of overflow conditions before overflow occurs thereby preventing hazardous environmental events. (2) Detection of blocked sewer pipes, allowing quick and focused maintenance thereby reducing maintenance costs. (3)Detection of over-used and under-used pipes for long term municipal planning. (4) Monitoring of sewage flow in sensitive sites such as flow to the river or sea. (5) Estimation of sewage flow for costing purposes and especially for pricing the use of public infrastructure by industrial plants. The sewer meter solution consists of two main components: (1) The fielded component includes GaugerGSM, an ultrasonic non-contact level sensor integrated with GSM cellular transmitter. The fielded component also includes accessories such as external battery pack. (2) A web-based monitoring application for presenting data from all sewer sites.

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • River Level Monitoring -

    SUMMARY Fielded water level measurement stations, based on GaugerGSM sensor, report real time stream levels and flow. Stations are located across a stream-rich region of the upper Galilee feeding the Jordan river in the northern part of Israel. The region is a popular tourist destination due to its biblical origins, rich flora and fauna. Field data is available over the Internet to authorized engineers, site supervisors and Government officials. remote monitoring station - close up THE NEED The water basin in the Upper Galilee maintains a delicate balance between recharges, net precipitation, domestic and irrigation consumption, and water tourism (canoeing). Local and state officials are tasked to study the tradeoffs, manage risks and take actions to keep the balance. Monitoring stations are essential for data collection. remote monitoring station - overall

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • Oil & Gas Exploration and Pipeline Imaging

    Exploration and Pipeline Imaging

    GeoVantage specializes in custom imaging of basins for oil & gas exploration for up to date assessment of drilling activity and logistics. Large tracks of land, at 6 inch or 1 foot resolution, ensure that exploration companies know exactly what is happening in key regions of their lease holds and even those surrounding.

    For pipelines, GeoVantage offers quick, efficient capture of intricate pipeline layouts across all of North America and other countries. To ensure timely service, both large and small captures can be collected by a large group of sensors deployed in multiple places.

    Oil and Gas Pipeline Imaging and Class Analysis

    GeoVantage works closely with firms that specialize in Oil and Gas Pipeline imaging and class analysis. GIS Data Specialists (GDS) is one of those firms. GDS is able to take the GeoVantage high resolution imagery and output the information needed to comply with regulatory or company requirements for reporting.

    By GeoVantage based in Peabody, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you