Only show results available in Virginia? Ok

sewage monitor Applications

  • Monitoring Sewage Flow

    Monitoring Sewage Flow is a critical tool for local governments, for water and waste-water utilities and for industrial plants. Sewage monitoring can prevent environmental disasters such as sewage overflow within populated neighborhoods or excessive waste flow into local lakes, rivers or sea. Sewage monitoring is also an important tool for short term and long term planning of the sewers infrastructure. Short term refers to just-in-time and cost effective maintenance. For example, sending the technical team to the correct manhole at the correct time to clean and eliminate obstructions. Long term planning refers to designing the correct pipe diameters and correct slopes to contain sewage from new new buildings and plants. Sewage monitoring is a tool for billing plants who produce sewage above their water intake and a tool for plants which utilize water to request lower utility bills. Solid Applied Technologies provides a complete and tested solution for Sewer Monitoring.

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • Premium

    Area-velocity flowmeter for sewage lagoon discharge flow monitoring

    The Township of South Glengarry installs a new Greyline AVFM 5.0 Area-Velocity Flow Meter to measure continuous discharge from their municipal sewage lagoon. The sealed ultrasonic sensor is mounted in a horizontal 12` PVC pipe. The AVFM replaced a magnetic flowmeter that was unable to measure seasonal low flow rates.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Sewage Treatment Plants and Flow Sensors for Industry Application

    In sewage treatment plants, flow sensors are primarily installed for internal reasons. Ultrasonic flow meters are used to control the flow velocity in partially filled and fulfilled pressurized pipes, specific plant components, for leak detection or to control the use of additives. International regulations such as the EU-Directive for handling municipal waste water require flow metering for a continuous surveillance of waste water flow. Defective flow monitoring in sewage-treatment plants can therefore influence their operation, but there can also be legal or environmental consequences.


    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Area-velocity flowmeter for measuring sewage and stormwater flow

    Greyline AVFM Area-Velocity Flow Meters are installed thoughout the country by Teletronic Denmark to monitor municipal sewage and stormwater. Application photos and descriptions illustrate flow monitoring in manholes and open channels.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Stack Testing for Sewage Sludge Incinerators

    SEWAGE TREATMENT INDUSTRY: Provided Incinerator Performance Testing Services and Relative Accuracy Testing of a Continuous Emission Monitoring system associated with sewage sludge incinerator.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Real-time In-situ Effluent Monitoring

    The UviLux BOD Indicator enables in-situ, real-time, reporting of BOD within both natural water systems and water processing plants. The monitor detects fluorescent proteins that are inherent within sewage and slurry and provides an output in BOD equivalent units. The principle behind the measurement is the excitation of Tryptophan-like fluorescence within UV wavelength band, which has been shown to correlate with both BOD and bacterial contamination. With complete flexibility of deployment methodology, the UviLux BOD Indicator can be applied to both water supply and water recovery processing plants. For water supply processing, the UviLux BOD Indicator can be applied at the front end to the water intake to provide alarm of any contaminated water entering the plant. Applications within Waste Water Treatment Works can include monitoring of effluent levels at the final outflow point (into rivers and coastal areas) as well as the primary, secondary & tertiary stages, the data potentially feeding into energy saving systems to optimise process performances. The CTG UviLux BOD Indicator in-situ fluorometer can also be used within pipe and channel networks to test for incidences of black water and grey water cross-over.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Sewer Meter -

    Sewer Meters monitor sewage level and flow within the sewers. Benefits gained by sewer monitoring include: (1) Detection of overflow conditions before overflow occurs thereby preventing hazardous environmental events. (2) Detection of blocked sewer pipes, allowing quick and focused maintenance thereby reducing maintenance costs. (3)Detection of over-used and under-used pipes for long term municipal planning. (4) Monitoring of sewage flow in sensitive sites such as flow to the river or sea. (5) Estimation of sewage flow for costing purposes and especially for pricing the use of public infrastructure by industrial plants. The sewer meter solution consists of two main components: (1) The fielded component includes GaugerGSM, an ultrasonic non-contact level sensor integrated with GSM cellular transmitter. The fielded component also includes accessories such as external battery pack. (2) A web-based monitoring application for presenting data from all sewer sites.

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • Continuous Monitoring of Wastewater

    The Sorbisense method allows for efficient monitoring of the sewage system and can help reduce costs of operation and environmental impact. The method is particularly well suited for tracking the source of periodic discharges, the identification of faulty pipe connections of the measuring of values in the recipient. The method also allows for measurements in dynamic sources - such as emissions from roads, roofs, parking lots and overflow

    By SORBISENSE based in Tjele, DENMARK.

  • Continuous Monitoring of Surface Water

    The Sorbisense method is especially suitable for measurements in dynamic environments. For example, in rivers, streams and lakes.

    The method is innovative and allows you to implement continuous and cost effective measurements in both urban and in rural areas. For example, measuring the leaching of nutrients from the cultivation of wetlands and measuring water quality in rainwater and sewage.

    By SORBISENSE based in Tjele, DENMARK.

  • Final effluent monitoring for wastewater treatment industry

    Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent monitoring and perform water analysis for key consent parameters.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Water accountability portable monitoring for solving flow rate mystery

    The Glen Walter Sewage Collection System was built to service 1080 customers in 1989. At the time the population was 850 but by 1995 the sewage treatment plant had already reached capacity. Shawn Killoran took over the Operations Manger position in 1999 and, along with the Mayor and Council, he immediately had concerns about the excess flow.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you