With the increased use of storm water retention tanks, the need arises to routinely clean the tanks. Regular cleaning maintains combined sewer overflow (CSO) capacity and prevents septicity and odor problems associated with stagnant effluent. PWTech® Tipping Buckets provide a simple yet robust solution for flushing retention tanks.
TenCate Geotube technology dewaters primary, secondary and overflow sludge from the sewage treatment plants’ digesters and lagoons. This municipal dewatering solution is used in water and wastewater treatment applications including lagoons, tanks, and digester cleanouts. The containers can provide dewatering and containment in one operation, with 85% to 90% reduction of BOD in the effluent. Most of the time, the dewatered effluent is clear and safe enough to be returned to the sewage treatment plants.
Using Oxygen to Solve Waste Water Problems
Lack of oxygen can cause inadequate purification or even anaerobic decomposition, as well as offensive odors. Injecting oxygen into sludge beds &/or piping allows you to:
* Reduce nitrogen levels
* Meet peak O2 demands
* Have a back up to your aeration system
* Pre-purify waste water
* Control odors
* Deter corrosion damage
* Meet increased requirements regarding waste water purification
Sewage Water Tank used in agriculture, industry, remote area. Its advantages are handles welded around the perimeter allow for easy setup and packing, rapid deployment, large capacity, and low cost. If you have any need kindly let us know, we will provide
Products from BD|SENSORS are becoming increasingly popular in the environmental engineering sector, too. In the industrial and municipal water industry, electronic pressure sensors are used for a variety of purposes, for example measuring filling heights. In this case, the materials must meet very specific requirements. They must be able to withstand aggressive media and mechanical loads.
Dewatering and Thickening of Municipal Sewage Sludge using the Decanter. Flottweg has more than 50 years of experience in dewatering and thickening sewage slurry. We know the special requirements of sewage treatment plants and the water industry. As a result, we have developed a special decanter series especially for sewage treatment plants: the Flottweg C series.
Use natural air currents for aerobic sewage treatment via venting pipes.
Alternatively, they can be solar powered using a very low energy 12 Volt fan.
The FILTERPOD requires no electricity for the treatment process. They finally allow modern, high quality sewage treatment for all regions of the world, even for off-grid locations.
Greyline AVFM Area-Velocity Flow Meters are installed thoughout the country by Teletronic Denmark to monitor municipal sewage and stormwater. Application photos and descriptions illustrate flow monitoring in manholes and open channels.
In sewage treatment plants, flow sensors are primarily installed for internal reasons. Ultrasonic flow meters are used to control the flow velocity in partially filled and fulfilled pressurized pipes, specific plant components, for leak detection or to control the use of additives. International regulations such as the EU-Directive for handling municipal waste water require flow metering for a continuous surveillance of waste water flow. Defective flow monitoring in sewage-treatment plants can therefore influence...