Only show results available in Virginia? Ok

site assessment Applications

  • Analytical services for site assessment and remediation

    Analytical precision is essential, whether remediation is to abide by regulatory provisions or for development projects. With specific standards in place for each region and situation, Maxxam has developed comprehensive test packages for soil, groundwater, sediments, surface water and soil vapour to meet provincial regulations and/or Canada-wide Standards as set out by the Canadian Council of Ministers of the Environment.

    By Maxxam Analytics based in Mississauga, ONTARIO (CANADA).

  • Site and Risk Assessments, Risk Management and Remdial Solutions

    No matter what the size of the project is, we service residential, commercial, industrial, local, state and federal agency clients, conducting environmental site assessments, deterministic and probabilistic risk characterizations and Indoor Air Forensic Investigations to evaluate the impact of exposures to hazardous chemicals and radio-logical materials on human health, public welfare, safety and the environment in MA, NY, CT, RI, NH, CO, and the Virgin Islands. Projects undertaken comply with Federal CERCLA/SARA, TSCA, RCRA, RBCA, Brownfields, NRC, DOD and DOE regulations and/or programs, and at the state level: Massachusetts Contingency Plan (MCP), Connecticut Department of Energy & Environmental Protection (CTDEEP) Remedial Standards, New Hampshire Department of Environmental Services (DES), New York (NYSDEC), New Jersey, Maryland, Rhode Island and other state programs, using innovative approaches to develop site-specific risk-based cleanup strategies and

    By Risk Management Incorporated - Environmental Services based in Acton, MASSACHUSETTS (USA).

  • Premium

    Radiation Monitoring for Nuclear Military Sites

    Deterrence is the cornerstone of Defense, reflected in today`s nuclear military vehicles (submarines, aircraft carriers, aircraft, etc.) and sensitive sites. Defense calls on Saphymo`s exhaustive product range to secure its personnel and equipment and shoulder the emergency services in case of a CBRN threat. All military units are required to be fitted out with detection and decontamination devices, and possess the special expertise needed to manage exceptional events. Nuclear military sites must also be equipped with specialist monitoring devices. Dosimetry, survey meters, access control, Radiation Monitoring Systems, environmental monitoring networks and numerous other solutions offer valuable decision-aid tools, providing fast and accurate information and easier situation assessment.

    By Saphymo based in Montigny Le Bretonneux, FRANCE.

  • Premium

    Contaminated Water Filtration

    Industry standard best practices are designed to ensure that all work done on Asbestos Abatement Projects is done to the highest level of safety and risk management. Containment of the generated waste water fibers and debris is critical to proper compliance and worker safety. If these fibers are not captured and contained, they can be very harmful for the environment, on-site workers and the occupants of neighboring areas. Exactly how you approach your containment and capture solutions will depend on the individual site’s risk assessment report. If you need help identifying solutions to the issues raised in the report, feel free to contact our customer service department and we can review your options together. Water from showers at Asbestos Abatement sites is often contaminated with asbestos fibers from washing protective gear and equipment. This water must be filtered prior to discharge into a drain.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Ammonit Wind Resource Assessment in Cold Climates

    For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems robust enough for harsh and cold climates. Ammonit offers standard heating systems as well as individual heating solutions, which combine several power sources suitable for the site.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems offered by Ammonit meet the highest standards of quality and are designed for the local site conditions with regard to sensor performance, communication system and power supply.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Wind Farm Noise Assessment by XL2

    One of the largest acoustic consulting firms in Australia was engaged by the New South Wales Department of Planning & Industry to conduct wind farm noise assessments. The goal was to perform a specialist, independent acoustic compliance audit of three major wind farms located near Canberra, Australia’s capital city. The objective of the study was to conduct a detailed noise assessment at residential dwellings near to the wind farms. Three wind farms near Canberra, Australia, were investigated. XL2 Sound Level Meters were operated on a continuous basis, typically over a six week period at each wind farm. The XL2 was battery powered to enable continuous noise logging for two weeks at a time at each residential site. The recorded data was then processed in accordance with the relevant standards specified in the conditions of consent for wind farms.

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • Ammonit Solar Resource Assessment Systems

    In order to assure well-founded decisions in designing profitable solar power plants, the solar irradiance should be measured in the assessment phase. Irradiation is a crucial parameter for site selection and plant design and economics of plant. There are many different ways and technologies to measure the irradiance phenomena that influences the power generation of a future solar power plant. Ammonit’s solutions are designed to meet the latest standards with regard to accuracy and affordability of the measurement.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • GPR

    GPR and EM play an integral part by providing a non-intrusive means of examining the subsurface for environmental hazards such as soil contamination, underground storage tanks and drums. GPR can delineate landfills and pathways for contaminant flow, as well as conduct hydrogeologic investigations such as water table mapping. We offer innovative technology to support site assessment needs.

    By Geomorph Instruments based in Piraeus, GREECE.

  • Premium

    Abatement and Remediation

    Containment and safety issues are a critical consideration when working on any mold, asbestos, or lead remediation/abatement projects. Improperly contained, the dust and bio-contaminants released can, be very harmful for both on-site workers and occupants in neighboring areas. Exactly how you approach your containment and capture solutions will depend on the individual site’s risk assessment report. If you need help identifying solutions to the issues raised in the report, feel free to contact our customer service department and we can review your options together. In most cases, however, there are four common considerations that will be relevant: -Meeting Containment and Air Change Requirements -Monitoring of Containment Pressure -Sterilization of Filtered Air -Removal of Odors, Mold Spores, VOC’s and other Airborne Bio-Contaminates

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Wind Energy Meteorology

    As the world addresses the challenges of global warming green energy production and in particular wind energy generation has increased significantly. Biral can provide sensors for the control of aviation obstacle light intensity, wind speed measurement and site assessment. The Deutscher Wetterdienst (German Meteorological Service – DWD) has certified the VPF-710, SWS-100 and SWS-200 sensors as suitable for use in visibility controlled wind turbine obstruction light systems.

    By Biral - Bristol Industrial & Research Associates Ltd based in Portishead, UNITED KINGDOM.

  • Pulsar noise testing equipment for construction industry

    The construction sector and its wide range of associated activities are very varied and from a noise monitoring perspective offer many unique challenges. However, Pulsar Instruments have a solution; a construction Pulsar noise meter with the ability to effectively assess the following two key categories; Noise at Work (potential for noise induced hearing loss due to long term exposure to noisy activities). Environmental Noise (the potential to cause annoyance to surrounding areas or buildings during site work).

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM.

  • Data analysis and visualization tools for monitoring well decommissioning

    Contaminated groundwater sites worldwide are engaged in regular sampling of monitoring wells at a typical cost of $1,500 per well-sampling event. On most sites, many wells are redundant or geostatistically insignificant and can be decommissioned.
    EVS-PRO and MVS`s Well Decommission module analyses all available data and quantifies the impact on site assessment quality associated with removing each well. The impact of removing a well is quantified in terms of its impact on the geostatistical plume extent.
    During remediation plumes are shrinking and may drift. This can necessitate decommissioning of some wells and adding new wells. C Tech`s well decommissioning and DrillGuide© technology provide the tools to properly monitor and guide the remediation efforts at the lowest possible cost.

    By C Tech Development Corporation based in Henderson, NEVADA (USA).

  • Marine envrionmental solutions for renewable energy industry

    Fugro EMU Limited is a specialist in renewable energy and has been involved in assisting clients in their site selection process for R2, Scottish Territorial Waters and R3 developments. In the initial site selection process, Fugro EMU will broadly highlight the environmental, socio-economic and technical issues of a given site through a combination of short term consultation, desk based studies and expert knowledge thereby allowing the client to make a site selection based on accepted scientific fact. Once a site has been selected, Fugro EMU’s team of specialist environmental consultants will further assess the site on a number of feasibility factors including geophysical analysis, environmental constraints and current uses.

    By Fugro EMU Limited based in Portsmouth, UNITED KINGDOM.

  • Noise and vibration problem solutions for transportation & infrastructure sector

    Roads, railways and airports are the largest source of transportation noise and frequently effects development land for houses, schools and hospitals. Noise sensitive developments adjacent to or affected by transportation noise require the careful assessment of these sources, either by measurement or prediction and often both. This assessment enables the correct specification of the building envelope (walls, windows, ventilators and roofs) to achieve appropriate internal noise levels in new developments. Here social housing providers are often at the forefront of providing superior internal ambient noise climate for their tenants and require precise specification of glazing and ventilation systems. New or altered forms of transportation sources near to existing noise sensitive sites also require careful assessment to minimise impact.

    By Acoustic Associates Sussex Ltd based in Shoreham Airport, UNITED KINGDOM.

  • Water treatment for power plants

    The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine condensers, and auxiliary plant cooling water.

    The primary application of modern water treatment technology is to maintain the integrity and performance of the power plant. Critical plant applications have water purity or conditioning requirements that must be adhered to for safe, reliable and efficient power generation.

    Experience has shown that integration of water technology treatments with power plant design can be very important in reducing operational problems and component failures 

    At power plant worldwide there are increasing limitations on water availability and environmental restrictions on discharges. This is expected to promote measures for water conservation and to have an increasing influence on water treatment decisions. At power plant, the recycling of internal wastewater streams can extend from the recovery of individual high-quality waste streams, which can be reused either directly or after only limited treatment, through to the development of fully integrated water/wastewater treatment systems for zero liquid discharge. However, the application of reuse schemes requires site-specific assessment, as not all waters may be viable options for recovery.

    By De Nora Water Technologies based in Colmar, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you