sludge treatment plant Applications in Canada

  • Premium

    Sludge Dewatering

    The waste-sludge generated by primary and secondary (biological) treatment of municipal & industrial wastewater needs to be managed at every plant big or small. In the larger sewage treatment facilities waste sludge thickening and dewatering has always been assumed a necessity without the planners and designers thinking twice about the cost requirements. In the smaller and decentralized STP’s where available investment is always lower, the on-site waste-sludge management (thickening & dewatering) maybe compromis...

    By DEVISE ENGINEERING S.A. Distributor in London, ONTARIO (CANADA).

  • Premium

    Dewatering and thickening of municipal sewage sludge

    Dewatering and Thickening of Municipal Sewage Sludge using the Decanter. Flottweg has more than 50 years of experience in dewatering and thickening sewage slurry. We know the special requirements of sewage treatment plants and the water industry. As a result, we have developed a special decanter series especially for sewage treatment plants: the Flottweg C series.

    By Flottweg SE Office in Concord, ONTARIO (CANADA).

  • Premium

    Anerobic treatment of wastewater

    30 years of experience in the design, construction, and operation of waste-to-energy plants for a wide range of industrial and municipal clients. Our proprietary anaerobic treatment technologies process wastewater and sludge to produce biogas, which can b

    By Fluence Corporation Office in Bogotá, BRITISH COLUMBIA (CANADA).

  • Gas infusion technology solutions for the water treatment industry

    Every municipality in the developed world has some form of water and wastewater treatment system. This varies from simple outfalls direct to the ocean to very sophisticated activated sludge plants with multiple unit processes dedicated to converting human waste, industrial effluents and storm runoff into clean water discharges and solids acceptable for some form of reuse. inVentures using its gas inFusion technology, has developed the gPRO system for the prevention and remediation of major algae blooms that...

    By inVentures Technologies Incorporated. based in New Brunswick, NEW BRUNSWICK (CANADA).

  • Gas Phase Reduction Technology for Sewage Sludge/Biomass Conversion

    The Natural Energy Solution uses a proprietary, patented process called Gas Phase Reduction (”GPR”).  This is a highly effective, non-incineration method that converts all sewage sludge/biosolids into a methane product gas. A standalone GPR processing plant solely for biosolids can be built and at scale will be a highly desirable asset. The most efficient business model is to include the processing of biosolids with traditional Municipal Solid Waste (“MSW”). Th...

    By Natural Energy Systems Inc. (NES) based in Burlington, ONTARIO (CANADA).

  • Filamentous Bulking Control with Hydrogen Peroxide

    Basis of Control with Hydrogen Peroxide Hydrogen peroxide may be used to correct a serious filamentous bulking situation or, preferably, to prevent one from occurring until adjustments can be made to remove the cause. When applied to the return activated sludge, hydrogen peroxide supplies dissolved oxygen which helps restore the microbial activity necessary for effective operation, while selectively oxidizing the filaments which retard settling. The effective dose of hydrogen peroxide is a function of time and...

    By USP Technologies Office in London, ONTARIO (CANADA).

  • Headworks Odor and Corrosion Control Using Hydrogen Peroxide

    Hydrogen Peroxide typically controls odors and corrosion at treatment plant headworks by direct oxidation of hydrogen sulfide (H2S) within the wastewater. In the direct oxidation mode, H2O2 is applied to the wastewater 5-30 minutes prior to the point where the odors are being released, generally as the wastewater line enters the plant boundary. The efficiency of hydrogen peroxide treatment depends upon the available reaction time, the level of iron in the wastewater (reaction catalyst), wastewater pH and...

    By USP Technologies Office in London, ONTARIO (CANADA).

  • Premium

    Odor control for refining/petroleum

    You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including...

    By OMI Industries (OMI) Distributor in Anselme, QUEBEC (CANADA).

  • Water quality monitoring for municipal drinking water industry

    Real Tech offers solutions that can provide substantial benefits to drinking water treatment plants. Continuous online monitoring can ensure water quality standards are met without the need for chemical overdosing while maintaining high confidence in the safety of the treated water. Significant cost savings can be achieved by optimizing coagulant dosage, reduced sludge production and reduced energy requirements.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Precision moisture analysis instruments for fast, accurate solids analysis for wastewater

    Computrac moisture, solids and ash analyzers are able to quickly and easily determine solids content of cakes, slurries and sludge samples for the wastewater, hazardous waste and landfill industries. Identifying the optimal solids content of these byproducts of the treatment process can provide significant cost savings on chemical additives, haulage and incineration. Computrac analyzers are easy to use and their rugged and reliable design means that you’ll get accurate results whether they’re in...

    By Arizona Instrument LLC Distributor in ALBERTA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you