Only show results available in Virginia? Ok

soil remediation oil Applications

  • Soil Applications Testing Crude Oil

    Sitelab's UVF-3100D model is used by environmental contractor to assist with soil remediation projects in West Texas.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Odor control for remediation

    Helping others clean up the earth by clearing up brownfield remediation odors. Helping others clean up the earth by clearing up brownfield remediation odors. Brownfield remediation consists of removing large amounts of soil that have been saturated with tar, oil or other contaminating substances. Not only dangerous to handle, the disturbed soil is often infused with very unpleasant and in some cases potentially nauseous odors.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Contaminated Soils with Diesel Fuel and Heating Oils

    Sitelab's UVF-3100D is used to test soil to help investigate and clean up sites contaminated by above ground or underground storage tanks (USTs). Soils can be analyzed for extended diesel range organics (EDRO) or extractable petroleum hydrocarbons (EPH). Results correlate well to confirmatory lab methods.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Horizontal Remediation Well Systems

    Horizontal wells are a proven and effective remedial technology for site cleanup. For environmental applications, horizontal wells offer several advantages in comparison to traditional vertical wells. The first horizontal wells were installed using a mid-sized directional drill rig in 1993 by Directional Technologies, Inc. The three (3) horizontal Soil Vapor Extraction wells installed at John F. Kennedy International Airport was the beginning of a new industry. Directional Technologies, Inc. founders transferred their experience from the oil fields to the environmental industry. This has resulted in the installation of over 1,000 horizontal wells for site remediation worldwide. Horizontal Remediation Wells are a time-tested and proven technology that can provide solutions for problems previously considered unfeasible. Interested in learning more about this remedial technology, visit us at www.directionaltech.com for case studies and more.

    By Directional Technologies, Inc. based in Miramar Beach, FLORIDA (USA).

  • Active Refinery Remediation

    Waste Management Unit (WMU) closures at this active refinery Waste Management Unit (WMU) closures at this active refinery - Installation of several soil, Liquid Boot, and full multi-layer geocomposite cover systems in various facility locations- - Sensitive construction practices including large scale activities near power lines, 30 inch raw water line, and several active emergency flares - Completed performance based in-situ solidification/stabilization, cap and closure, using ENTACT owned large diameter auger Delmag rig and custom-fabricated Geodrill - COC`s include heavy metals, PAH, volatile organic compounds, and petroleum hydrocarbons Performance criteria include an unconfined compressive strength of 10 psi, permeability coefficient of less than 2.1x10-6 cm/sec, and an admixture pH of less than 11.5 - ENTACT performed in-house treatability analysis to develop reagent admixture

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Oil skimmers for montoring wells industry

    Ambar manufactures a specific oil skimmer for sub surface remediation where oil needs to be removed from ground water monitoring wells.

    By Ambar Oil Skimmers based in Westwego, LOUISIANA (USA).

  • Remedial Construction for Former Oil Field Production Sites

    - Remediation of 600 former production or release sites transecting four counties - Treatment of over 500,000 cubic yards of petroleum impacted soils from the various site areas in an 8-acre bioremediation landfarm - Remediated soils are then re-used as backfill throughout the disturbed areas

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Soil and Groundwater treatment solutions for bioremediation industry

    Today bioremediation is successfully used as soil– and groundwater remediation technology. Many bioremediation systems, both in-situ as ex-situ techniques, usually result in considerable cost savings. Since the beginning of the 1980’s both in-situ and ex-situ bioremediation projects have been successfully completed worldwide through the use of preselected and adapted bacteria. QM Environmental Services supplies a range of microbial, bioactivator and nutrient products and gas delivery systems for the use in both aerobic and anaerobic bioremediation programs. Most common contaminants ranging from aliphatic hydrocarbons such as petroleum, lubrication oils, aromatic compounds like benzene and toluene to chlorinated solvents can be treated with these products.

    By QM Environmental Services Ltd. based in The Hague, NETHERLANDS.

  • Trivol 102 Regeneration

    Trivol 102 Regeneration is a natural based absorbent that will soak up all hydrocarbon spills on land. We have super charged our product with millions of microbes that speed up the biodegradation process. Another special additive helps to naturally fertilize the soil to stimulate plant growth and further remediate the affected area. Trivol 102 Regeneration can be added to Trivol 101 Containment after it has been skimmed from water to dry ground.

    By Ameret LLC based in Lenexa, MISSOURI (USA).

  • Premium

    ppm Measurement of Oil in Water for the Petrochemical Industry

    Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Environmental testing & compliance screening for energy/environmental sector

    Compliance screening and testing is often carried out during the manufacturing phase of a product, and all the way through its disposal or recycling process. It ensures that products and materials meet specific standards or comply with international and local directives or regulations. These standards and regulations are introduced to ensure the quality and safety of a product, and to minimise or eliminate its negative impact on the environment and people. Examples of products or materials tested are: electrical and electronic equipment (for compliance with the Restriction of Hazardous Substances (RoHS) directive), waste oils, soil (soil remediation depending on contents of toxic metals), children’s products (for compliance with Consumer Product Safety Improvement Act of 2008), etc.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you