soil stabilizer Applications available in Virginia

  • Soil Stabilization

    Problem: Poor load-bearing soils pose a significant problem for transportation and construction needs. Unpaved areas, such as access roads, paths, parking lots, driveways, etc can be highly vulnerable to near-surface shear failure and rutting, especially in moist conditions or areas with higher expected loads. Typically, engineers bridge over weak soils with rigid structures such as thick, reinforced concrete for roads and highways. However, such techniques are prohibitively expensive and inordinately difficult...

  • Metal Stabilization

    In-situ geochemical fixation using a chemical reductant such as Remotox (calcium polysulfide) converts the soluble toxic metals into insoluble non-toxic compounds. Remotox has proven to be effective under a wide range of conditions. It is considered more stable and persistent than other reductants in subsurface environments, and is relatively safe to handle in the field and easy to apply.

    By Graus Chemicals, LLC based in Glendale, ARIZONA (USA).

  • Erosion control solutions for the waterway & shoreline stabilization

    Stream banks and shorelines can present far-reaching erosion and sediment control challenges. Variable flow conditions and shoreline shear stresses must be considered as well as the effects of flooding, runoff and topography. The need to protect water quality plus aquatic and wildlife habitats can be critical. No matter what erosion control problems and other issues are part of your project, you can be sure we have a solution that works. Whether your shoreline or stream bank project is simple or demanding, and...

    By North American Green based in Poseyville, INDIANA (USA).

  • Premium

    Erosion and dust control products for sub-base stabilizer

    Envirotac line of polymers has been effectively used as a sub-base for roads, out-performing a standard rock base in performance and significantly in cost. Envirotac has been a preferred choice by many Departments of Transportation, replacing rock base and then having a cinder seal or chip seal sprayed over.

  • Geotechnical Applications

    Pore pressure variability and control is one of the most significant aspects of Geotechnical Engineering practice related to slope stability, underground openings, foundation of heavy structures, and water retention facilities. Pore pressure effects are most often controlled by natural small-scale hydrogeologic details. Characterization and management of pore pressures requires closely-arrayed repeated measurements to determine the effects of these details for design of appropriate mitigation measures, for...

    By Westbay Instruments based in Burnaby, BRITISH COLUMBIA (CANADA).

  • Premium

    Erosion and dust control products for unpaved road stabilizer

    Our Envirotac line of polymers have been used on roads around the world. Used with in-situ material, Envirotac will increase the CBR, increase compaction, reduce soils permeability, create a dust free surface, and increase traction even when wet, all at a fraction of the cost of asphalt, importing rock base, maintaining with water and using bitumen.

  • Premium

    Erosion and dust control products for cart paths and trail stabilizer

    Envirotac helps in dust control, mud control and avoids path and trail erosion. Aesthetically pleasing it will hold all soils and aggregate in place making a durable path and trail that will take minimum maintenance to upkeep.

  • Premium

    Erosion and dust control products for runways stabilizer

    When Envirotac bonds the soil particles, it will create a tough durable surface that will withstand heavy loads and adverse weather conditions. It works better than conventional methods at a fraction of the cost. The time frame required to construct with Envirotac is greatly reduced from traditional methods as well, so you can start work immediately.

  • Premium

    Geotextiles solutions for reinforced embankments areas

    Need to increase the stability of your embankment? TenCate geosynthetics reinforce the shear stresses of the fill material leading to an increase of the foundation bearing capacity.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Environmental protection solutions for the porous pavements

    Our porous pavement solutions can be designed for use with a variety of permeable fill to suit any loading and stormwater requirements. Three high-performance paving options offer porous solutions to hard surface pavements: GEOBLOCK grass pavers; GEOPAVE aggregate pavers; and GEOWEB pervious soil stabilization systems - all economical options for emergency, utility and site access roads, and permeable parking areas. Each solution is suitable for low impact development (LID) and green infrastructure design and...

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

  • Premium

    Geotextiles solutions for retaining structures areas

    In infrastructure projects in which space has to be saved or land acquisition minimized, TenCate Geosynthetic soil reinforcement technology has been used in the design and construction of steep slopes or walls. The use of this technology increases the stability of such structures.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Premium

    Erosion and dust control products for transportation

    Envirotac line of polymers have been used to construct roads around the world. Our polymers cross link the soils at a nano level creating a tough durable surface that will stand up to Heavy Haul trucks and the daily grind of vehicular traffic. If you are using Chlorides, Lignin`s, or Enzymes, make the switch to a superior road stabilizing technology.

  • Premium

    Erosion and dust control products for BMX

    Envirotac has been used for dust control / soil stabilization on numerous BMX tracks throughout the United States. Its not uncommon for Nationals to be hosted on an Envirotac stabilized surface. When constructing turns and jumps incorporate Envirotac into the soil to keep the shape of the jump or turn and have a dust free surface that will hold up to rain and snow.

  • Premium

    Erosion and dust control products for golf

    Our Envirotac line of polymers are the perfect solution for stabilizing any soil related project in the golf industry. Use Envirotac to line bunkers before placing white sand and it`ll create a tough layer of protection that will prevent native soil from contaminating the imported sand. It will outperform traditional methods at a fraction of the cost and is a lot easier to apply. Envirotac will also keep decomposed granite (DG) in place, so when rains hit the DG it will not track onto the course. Great for golf...

  • Premium

    Erosion and dust control products for military

    The Envirotac (Rhino Snot) line of polymers are the number one used soil stabilization chemicals by the Untied States Military. They have tested numerous products and continue to rely on Envirotac to protect our country`s assets. Applications include but are not limited to runways, landing pads, supply roads, base camps, and so much more. In a test conducted by the United States Naval Facilities Engineering Service Center our Envirotac polymer was 97% effective and the second most effective was a well known...

  • High-calcium lime slurry for environmental reclamation industry

    Lime is the product of choice for soil stabilization and for road building applications as an anti-stripping agent for asphalt.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • In Situ Injection Design and implementation services

    Since 1998 IET has designed and implemented over 1500 remedial projects, including reductive biotic/abiotic approaches, ISCO, synergistic approaches, metals stabilization, DNAPL stabilization, soil mixing and combined remedies.

    By Innovative Environmental Technologies, Inc. (IET) based in Pipersville, PENNSYLVANIA (USA).

  • Flood defense systems for Erosion control

    Because of the soil filled nature of our barriers and the ability to achieve a variety of vertical or pyramid stacked configurations, we have a number of erosion control applications we are commonly used for. Applications include: Soil stabilization, Retaining walls (can be self-anchored with 90 degree tie-ins), Riverbank protection, Toe protection, Wetland restoration, Beach protection.

    By Flood Defense Group LLC based in Boise, IDAHO (USA).

  • Water Containment

    Polymeric liners are prone to puncture by inclusions within the underlying soil. Thick, non-woven geotextile can be used to give protection to liners during installation. Often the upper slopes are exposed to damage and it is a good practice to cover these areas with a depth of soil which will sustain vegetation. Alternatively, a stone or concrete substance can be used to achieve a hard landscaped appearance. Our product will protect the liner from puncture whilst also providing a degree of slope stability.

    By Manas Geo Tech India Pvt. Ltd. based in New Delhi, INDIA.

  • Railway slope & ballast reinforcement solutions for the railroad sector

    The GEOWEB system is the ‘go to’ solution for challenging soil stability problems for both new construction and repair work. The GEOWEB 3D system is a versatile solution for ballast reinforcement, yard stabilization and erosion protection of embankments and stormwater channels, offering a more economical solution than geogrids or other 2D solutions - especially in soft soil environments and in heavy, repeated loading areas.

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you