Only show results available in Virginia? Ok

solid waste separation Applications

  • Premium

    Recycling equipments for shredding solid waste & municipal solid waste

    Solid waste and municipal solid waste (MSW) size reduction requires processing of many different materials, from filled drums to household waste. And, as the amount of solid waste increases and the cost of landfill management increases, it is becoming more critical that waste management become more effective, economic and efficient. Shredded and compacted waste is easier and cheaper to transport and extends the life of the landfill. In addition, separating out materials that can be reclaimed and recycled or...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Solid/liquid separation for environment industry

    Four dewatering, three thickening, four drying, and multiple screening technologies for industrial and municipal wastewater, biomass and organic waste. Process expertise for sustainable solutions. Challenging municipal budgets. Water shortages. A need for renewable energy. Today, there’s simply no room for waste. Getting the most efficient separation is essential, not just to profitability, but also to ensuring sustainable growth.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.

  • Liquid/solid separation solutions for the municipal landfill leachate

    A customer in the municipal solid waste industry needed a solid/liquid separation process as a component of a system solution for disposal of leachate water. At Heron Innovators, we specialize in Suspended Air Flotation systems for wastewater applications, and were contracted to manufacture and install a skid-mounted system to remove flocculated solids prior to disposal in a drainfield. The process incorporated lime softening to remove calcium, a major contributor to TDS, from the leachate wastestream,...

    By Heron Innovators based in Rocklin, CALIFORNIA (USA).

  • Filter technique solutions for the solid / fluid-separation with the wendelfilter sector

    The pollution flows into the feeding tank. The optimal fill level can be controlled manually, using a switch through a fixture. The pollution is lifted upwards by the spiral over the divider pipe, which can be fitted with up to four filter columns. The solid material is concentrated and dehydrated in the spiral on the way up and released over the solid waste chute at the top. From there, it can be taken away by a conveyor. The precipitator efficiency is much higher using a very small 100μm fi lter than a...

    By KLASS-Filter GmbH based in Türkenfeld, GERMANY.

  • Premium

    Filtration in waste water treatments. disinfection

    The cost and efficiency of the waste water treatment is directly linked to the amount of suspended solids in the water.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • High performance solid-liquid separation system for deepwell industry

    Deepwell facilities for the disposal of plant waste streams often employ nominally rated spray spun elements, bags, diatomaceous earth filters, and various other types of conventional filtration technology. These labor intensive systems provide protection of the well from occlusion by suspended particle matter, albeit often with high operational cost and limited assurance of reliable fluid quality. The ongoing challenge facing a deepwell system is the requirement that the formation into which the waste is...

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Wastewater treatment solutions for waste sector

    IDRAFLOT flotation units are technological solutions which allow the separation of the suspended solids from wastewater coming from gas scrubber blow down (high concentration of SS) but also for the separation of low density compounds (oil and fats) which can be present in the streams collected by collectors. IDRAFLOT units can be easily installed also within small footprint collection centres.

    By IDRAFLOT based in Zoppola, ITALY.

  • SRF

    SRF Manufacture is an alternative fuel produced by shredding and dehydrating solid waste, typically consisting of combustible components of solid waste, including paper, card, wood, textiles and plastic. It can be produced to a range of specifications to meet customer requirements. Solid Recovered Fuel Manufacture The materials used to produce Solid Recovered Fuel pass through a series of shredders, screens, air classifiers/density separators and magnets. Inert materials, recyclable plastics and metals are...

    By MK Group based in Galbally, IRELAND.

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Separation solutions for constructions industry

    Today`s construction industry focuses a great deal on underground drilling and support systems. These processes typically use drilling fluid or slurry techniques. Packaged mud recycling systems are designed to minimize solids waste for disposal and effectively clean drilling fluid and slurry for active reuse.  Foundation Drillers utilize drilling fluids for stability of holes during operation. Mud reclaimers process the used drilling fluid for continuous use downhole and creates less solids waste.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Oil water separation for the food industry

    Packaged-food producers frequently use and then must discard large batches of cooking oil used in their process. Usually they drain most of the oil directly from equipment, but they must remove residual oil by regularly washing fryers, ovens, conveyors, and other machinery. 

    The oil mixes with the wash water and becomes part of the plants wastewater stream. Having oil in wastewater complicates the wastewater-treatment process by making it more expensive, more time-consuming, and less effective....

    By Oil Skimmers, Inc. based in Cleveland, OHIO (USA).

  • Premium

    Recycling equipments for refrigerator recycling

    The Eldan refrigerator recycling plant is designed for processing refrigerators operating with CFC/pentane gasses in order to prevent harmful substances to evaporate into the atmosphere and to achieve the most efficient recycling of the solid materials. A complete refrigerator recycling system includes everything from pre-chopping to separation of the material.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Shredding solutions for aluminum cans

    The shredding process of aluminum cans, pressed or loosen, is done using two-shaft shredders. After that, in order to proceed with the briquetting phase, it is necessary to shred again the material using single-shaft, three- or four-shaft shredders for obtaining a controlled size. In addition to that SatrindTech offers customized solutions for a solid and liquid separation in case the material to be treated are filled cans.

    By SatrindTech Srl based in Arluno, ITALY.

  • Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding...

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Using evaporation to dewater Reverse Osmosis reject waste streams

    Reverse Osmosis (RO) technology has been used for years in various industries to separate dissolved solids from water by forcing the water through a semi-permeable membrane. RO is also commonly used to purify drinking water and desalinate seawater to yield potable water. The water and other molecules with lower molecular weight (specific weight of molecules allowed to pass through is dependent on the selected membrane) pass through the micropores in the membrane, yielding a purified water stream called the...

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Premium

    Wastewater evaporator Solutions for the air scrubber wastewater treatment

    Water wash air scrubbers are used for air pollution control in many industries that discharge gasses and smoke, to remove pollutants from the gas stream. A high-energy liquid spray washes the gas and removes pollutants from the air, These pollutants are then trapped in the water used for washing the gas. Safe disposal of air scrubber wastewater can be acheived by separating out the solids, using a Draygon Wastewater Evaporator.Draygon created the original "run-dry" evaporators, which can be run dry without...

    By Draygon LLC based in Venice, FLORIDA (USA).

  • Wastewater Treatment for Municipalities

    PBS Velká Bíteš develops and manufactures machines for the separation of solid and suspended particles from liquids. The so-called "Decanter Centrifuges" can be used for a wide range of applications: from separation of municipal and industrial sludge in waste water treatment plants, through food and chemical industries up to agriculture. In the area of separation, we offer not only the decanter centrifuges themselves, but also the related services, including servicing of third-party...

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you