Only show results available in Virginia? Ok

sorting technology Applications

  • Premium

    Recycling sorting solutions for the wire recovery

    Previously, cable and wire materials were often lost in the treatment and sorting process, resulting in a financial loss due to the high proportion of copper they contain. TOMRA sorting technologies are capable of detecting these wires, transferring them to a metal product and then finally sorting them in a further step into a cable fraction of outstanding purity.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Recycling sorting solutions for the fines copper

    Copper granulate, recovered by the recycling process of copper wires and cables, has the potential to be a high value resource. However, even after the removal of impurities, polymers and ferrous from the granulate, it can still contain small amounts of lead, brass or aluminum – often up to three percent. TOMRA sorting technology removes the remaining pollutants efficiently and automatically from the copper granulate – with an especially high efficiency of lead removal.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Optical Sorting Machines for single stream

    Irrespective of the used collection system and the corresponding task, we design systems that grant 100% efficiency. Various countries have different waste collection systems, resulting in different tasks for the sorting technology. For example, packaging waste mainly consists of plastics, paper and glass. Single-stream waste mainly consists of dry, mixed waste (paper, cardboard, films, plastics, metals, aluminium, and in many cases also glass). Heavy, mixed waste often also contains bulky materials etc. The integration of REDWAVE sorting machines into a waste treatment plant grants maximum purity of the sorted fractions.

    By REDWAVE a division of BT-Wolfgang Binder GmbH based in Gleisdorf, AUSTRIA.

  • Premium

    Recycling sorting solutions for the zorba - shredded non-ferrous metals

    The value of Zorba – shredded non-ferrous metals originating from end-of-life vehicles or WEEE – continues to increase, as the demand for copper, nickel and brass created by modern lifestyles is on the rise. TOMRA’s sensor-based sorting technology can double the value of Zorba.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Recycling sorting solutions for the non-ferrous metals - post shredder

    The widespread use of electronic products has created an enormous demand for the sorting of non-ferrous metals such as copper and aluminum. To be usable, these non-ferrous metal fractions must be treated to a high degree of purity. Thanks to TOMRA’s efficient sorting technology, separating these materials from metal waste makes is worthwhile in every aspect.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Recycling sorting solutions for the end-of-life vehicle scrap - shredder

    The growing demand for high-value, secondary raw materials renders targeted recycling increasingly attractive. Modern TOMRA Sorting technology generates clean non-ferrous metal fractions in customer shredder operations and results in valuable scrap metal gains.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Reliable Shredding Technology for Paper and Cardboard Industry

    We offer customized solutions for shredding paper and cardboard. Our experienced technicians optimally configure the shredding system to meet your needs and thus ensure a perfect shredding result. Paper, cardboard and pasteboard are valuable raw materials that play an important role in recycling and in the waste processing industry. The easy recyclability of cellulose permits the economically efficient and environmentally friendly reuse of paper. Before shredding, the material is sorted based on its prior use, foreign objects are removed and only then is the material shredded.

    By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA.

  • Premium

    Recycling equipments for white goods

    Granutech Saturn Systems design and manufacture white goods shredders and systems capable of sorting the ferrous fraction from the fluff and can equip these with eddy current and other finder technology to sort aluminum, stainless, and other recoverable metals.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Industrial Shredder For Municipal Waste Disposal

    With the growth of population and rapid development of the city, more and more municipal waste are produced and seriously influence our live and environment. Municipal waste also know as MSW, domestic waste and household refuse. Municipal waste should be shredded before burying or burning to save more storage space or to lower the transport cost for collecting. Harden has offered hundreds of excellent municipal waste shredding solutions for both individual or association project. Harden shreds any waste for a cleaner city and environment, please feel free to contact us for your customized shredding solution. Municipal Waste Disposal Methods Burying of municipal solid waste Incineration of municipal solid waste Pyrolysis and gasification of municipal solid waste Sorting and recycling of municipal solid waste Cooperative disposal of cement kiln Municipal Waste Shredding Technology Pre-shredding procedure Sorting and RDF disposal system

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • Complete solutions for the recycling industry

    For over 40 years, Macpresse designs and manufactures complete solutions for the recycling industry. From individual technologies, i.e. balers, shredders etc. right up to complete sorting plants and Material Recovery Faclities.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Premium

    Process control for the petrochemical chemical industry

    Most chemical products as we know today are composed of a few hundreds of basic chemicals, extracted mostly from crude oil and natural gas. Instrumentation, analyzer systems and process optimization are not new to the operation of all chemical and petrochemical processes. However, tightening regulations, competition pressure and increasing raw materials cost urges the industry to go deeper into process control technology. As a single-source supplier of the (petro)chemical industry since many years, AppliTek has supplied them many analyzer systems for monitoring chemical parameters in all sorts of applications, from the actual production step to peripheral treatment processes. Our application people and engineering department understand your needs and translate them into real solutions.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Tomato Paste Production Line

    With advanced technology and elaborate workmanship, we provide turnkey projects for tomato paste production. The handling capacity of the tomato paste production line is 1-2 tons per hour. Based on your requirements, we can provide on site installation, commissioning and training service for you. With reasonable design and low energy consumption, our tomato processing equipment is your cost-effective choice. Working Flow of Tomato Paste Production Line Fresh Tomato → Tomato Washing → Tomato Sorting→ Breaking → Preheating→Tomato Pulping → Vacuum Concentration → Paste Sterilization → Finished Tomato Paste More details: http://vegetable-machine.com/product/tomato-paste-production-line.html Email: info@amisymachine.com

    By Amisy Machinery based in Zhengzhou, CHINA.

  • Construction and Demolition Waste

    M&K plants divert Construction and Demolition waste from landfill by separating the waste into materials such as Hardcore, Soils, Wood(s), Metals, Stone, Cardboard, Paper and Plastic at the lowest possible cost per ton. M&K Construction and Demolition Waste Recycling Systems combine manual as well as automated sorting with the latest in feeding, screening & separation technology, allowing contractors to efficiently separate, sort and recover a wide variety of material types. What is Construction and Demolition Waste? C&D Waste is typically collected in open skip bins from construction or demolition sites. https://the-mkgroup.com/portfolio/construction-and-demolition-waste

    By MK Group based in Galbally, IRELAND.

  • Automotive Shredder Residue Drying

    Getting economic value from landfill waste like automotive shredder residue (ASR) is a big challenge that can have a big payoff. Vulcan® Systems Drying Technology is the key component of material preparation when separating ASR waste to reclaim energy and metals. Vulcan® ASR Dryer Systems are manufactured to suit each client’s individual project needs and custom-designed specifically to dry ASR, making the material easy to transport, separate, and handle. This drying system consists of a drum with a burner that is mounted to a combustion chamber. Shredder residue is fed into the rotary dryer. After passing through the system, the dried material is discharged to a transfer conveyor for further sorting and separation. The vapor from the process is pulled through a cyclone that is specifically designed to deal with the fine ASR dust, as well as a high-temperature baghouse that removes additional fine particulates from the vapor stream.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you