Only show results available in Virginia? Ok

sound measuring instrument Applications

  • Premium

    Sound instrumentation for measuring sound

    What is the difference between sound and noise? Clearly more than the loudness only. Although an aircraft is very noisy, a mosquito at night-time can be more than enough to spoil a good night`s sleep. Instead of looking at the loudness only as a criterion for the degree of noisiness, we shall simply regard noise as what it is - viz. unwanted sound.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Sound instrumentation for calibration

    Unfortunately, the word calibration has ended up having two meanings; viz. to describe the use of a sound calibrator in connection with a measurement and to describe periodic verification which is carried out in a Calibration Laboratory.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Sound instrumentation for vibration

    Vibration is simply defined as the variation of an object about a fixed position. To properly define and quantify the physical characteristics of vibration, however, is much more complex - account must be taken of the direction, frequency and magnitude of vibration. Then, what properties should be measured? Is it appropriate to measure the displacement of the vibrating object as a measure of its amplitude, or should we instead measure velocity, or acceleration? What are the conventions for measuring direction, and is it really important?

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Sound instrumentation for motorsport noise

    Norsonic is a world-leading supplier of sound measuring equipment for the motorsport industry. We have a long experience in supplying sound measurement solutions for racetracks, ranging from single noise monitors to large multichannel monitoring solutions with sophisticated reporting system.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Sound instrumentation for building acoustics

    The field of building acoustics consists of two parts; Room Acoustics which deals with sound propagation in a room and Building Acoustics, which deals with sound propagation between rooms. Typically, room acoustics is related to the quality of sound, e.g. concert hall acoustics, while building acoustics is more related to unwanted sound, i.e. when you want to hear as little as possible of what is going on in adjacent rooms. From a measurement technology point of view, the two have a lot in common which shall be outlined here.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Sound instrumentation for industrial hygiene

    Industrial hygiene is separated into two main applications - Noise at Work and Human Vibration. Norsonic has during the past year expanded the product portfolio to cover both applications. By close cooperation with our customers and health and safety research institutes we have designed a carefully balanced selection of measuring tools and application software that covers both the vibration and noise domain.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Sound instrumentation for environmental noise monitoring

    State of the art noise monitoring systems; Modern noise monitoring systems offer a wide range of advanced features and come with software that can analyze and structure long term measurements data efficiently. A complete noise monitoring system consists of one or more noise monitoring terminals, a noise server and work stations for presentation, post processing and reporting.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Sound level measurement for safety regulations

    Hand held instruments for the measurement of an employee`s noise exposure. Frequency analysis within Sound Level Meters can also be used to determine the correct selection of hearing protection.

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Sound level meters & Noise dosimeters for Motorsport noise measurement and monitoring industry

    Our noise measurement instruments are used at high profile circuits and venues around the world, helping owners, operators, teams and officials comply with noise limits and regulations. With a range of noise measurement tools including drive-by test systems with permanently installed and portable monitors for continuous measurement of vehicles, to handheld sound level meters for pre and post race scrutineering, we can help you monitor and control your noise levels on track, in the pits and in the surrounding environment.

    By Cirrus Research plc based in Hunmanby, UNITED KINGDOM.

  • Premium

    Sound level meters & Noise dosimeters for Construction industry

    Construction can be a industry where high noise levels are common and where both occupational and environmental noise monitoring may be needed. The measurement and monitoring of noise from construction sites can be carried out using a range of different instruments depending upon the time over which the measurements need to be made.

    By Cirrus Research plc based in Hunmanby, UNITED KINGDOM.

  • Oceanographic Monitoring

    For survey operations up to 6000m depth (and deeper by special request), Valeport offer instruments to measure and record the classic physical parameters of Temperature, Depth, Salinity, Density, Currents and Waves. Along with the most accurate Sound Velocity sensors in the world; the ability to interface other parameters / sensors such as pH, Dissolved Oxygen Turbidity, Flourometer, Transmissometer and PAR; Housings and deployment frames to suit in-line moorings, profiling and seabed deployments, Valeport can cater for all your oceanographic survey requirements.

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Environmental Noise Monitoring

    The XL2 Sound Level Meter provides the dedicated solution for monitoring environmental noise in industry and communities. It measures levels and detailed spectral information in parallel and stores the data on an SD card for post-processing and reporting. A linear audio file (wav-file) may be recorded for detailed simultaneous analysis. The type approved class 1 sound level meter offers a flexible handheld instrument with accurate and reliable measurements. Data recording can be scheduled to occur at pre-determined times or automatically triggered when pre-determined levels are exceeded. Applications: Unattended noise monitoring stations (mobile or fixed installations) Annoyance assessment of noise according to ISO 1996-2 Construction noise measurements meeting the Section 61 notice (UK) Urban noise monitoring and noise mapping according to directive 2002/49/EC Verifying boundary noise level emission Advantages Handheld and compact design for field applications and stand-alone oper

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • Electrical Based Tomography Systems for Batch mixing

    Batch mixing generally refers to mixing processes in vessels and ITS tomography instrumentation provides a tool to understand, optimise and control mixing. Tomography sensors take data from between 200 to 2,400 measurement points in a single snapshot, thus providing a sound basis to monitor changes in concentration of different materials and so quantify mixing. Sensors can be retrofitted through using probe based instruments, scanning the z-axis (which usually presents the key challenge to effective mixing). Alternatively, an array of up to 8 circular planes, each with 16 electrodes can be used to provide a more complete picture of the mixing process.

    By Industrial Tomography Systems (ITS) based in Manchester, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you