spectroscopy Applications available in St. Vincent & The Grenadines

  • Premium

    Analytical instruments for atomic spectroscopy

    Besides Mass Spectrometry, a further variety of analysis techniques are categorized as atomic spectroscopy. Analysis techniques which use inductively coupled plasma (ICP), such as ICP-OES and ICP-MS, are among these. With increasing environmental awareness backed by regulations, an increasingly important use of atomic spectroscopy techniques is in mercury analysis. Achieving a high mass flow control performance, e.g. high repeatability or an excellent turn-down ratio, is a prerequisite to achieve a high analyzer...

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Gas spectroscopy for laboratories

    By F-DGSi based in Evry, FRANCE.

  • FT-NIR spectroscopy for the biofuels industry

    FT-NIR spectroscopy is a widely used technique that can do rapid and non-destructive measurements in seconds. This technique can achieve multiple analysis results per measurement and determine real–time chemical information at-line and in-line.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • X-ray Photoelectron Spectroscopy for Coatings & Thin Film

    Surface coatings and thin films are of great commercial importance in many industries and are used to enhance or provide required properties to bulk materials specific to their applications. Thin films can range from tens of Angstroms to several microns in thickness and find application in areas as diverse as optical anti-reflective coatings, architectural glazing and drug eluting thin films in the pharmaceutical industry. X-ray photoelectron spectroscopy (XPS) is ideally suited to characterising the surface...

    By Kratos Analytical Ltd. based in Wharfside, UNITED KINGDOM.

  • X-Ray Photoelectron Spectroscopy for Catalysts & Petrochemicals

    X-ray photoelectron spectroscopy is used to characterise materials and surfaces used as catalysts for numerous chemical reactions with great success. Surface studies of catalysts range from fundamental research into core level shifts induced by adsorbed species as a model of reaction intermediates to applied research on used industrially relevant catalysts. Here we present a number of recent papers which include data acquired using Kratos AXIS spectrometers.

    By Kratos Analytical Ltd. based in Wharfside, UNITED KINGDOM.

  • Fluorine Analysis Using Laser Induced Breakdown Spectroscopy (LIBS)

    This technical note demonstrates the use of Laser Induced Breakdown Spectroscopy (LIBS) as an alternative technique for F analysis, which remains challenging for ICP based techniques. Request this application note at http://appliedspectra.com/applications/application-notes.html

    By Applied Spectra, Inc. (ASI) based in Fremont, CALIFORNIA (USA).

  • Rapid Analysis of Mining Samples Using Laser Induced Breakdown Spectroscopy (LIBS)

    Laser-induced breakdown spectroscopy (LIBS) offers many attractive analytical advantages with respect to other techniques for the mining industry. LIBS can detect elements from H – Pu, which includes non-metals, such as H, N, F, and O, along with high sensitivity for lighter elements (B, Li, C, K, Ca, Mg, Al, Si, etc.) Please see our website to request this application note: appliedspectra.com

    By Applied Spectra, Inc. (ASI) based in Fremont, CALIFORNIA (USA).

  • MEASURING HYDROXYL (OH) VALUES OF POLYOLS USING FT-NIR SPECTROSCOPY

    Recently, FT-NIR spectroscopy has been accepted as a rapid and accurate technique for determination of hydroxyl value of polyols. ASTM D6342-12 defines a method for measuring hydroxyl content of several materials. Using Galaxy Scientific's QuasIR series FT-NIR spectrometers, hydroxyl determination takes typically less than 1 minute per sample and requires no solvents, no reagents, and no columns or other consumables. The analysis does not even need to be performed in a lab or by a chemist, freeing them up for...

    By Galaxy Scientific based in NEW HAMPSHIRE (USA).

  • Octane Number of Gasoline using NIR Spectroscopy #3012

    When every second counts and performance is on the line Guided Wave's NIR analyzers allow for easy measurement of octane numbers in gasoline and refinery production units using fiber optic -based, near-infrared (NIR) spectroscopy. *Fast and reliable measurement of the octane number of gasoline (RON & MON). * Control gasoline production in real-time directly with in process monitoring. * Certify gasoline meets specification before release. *Gain significant improvements in process control. *Minimize the need for...

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

  • Plant Analysis by Laser Induced Breakdown Spectroscopy (LIBS)

    Laser-induced breakdown spectroscopy (LIBS) offers the ability to analyze plant samples with little to no sample preparation, provides detection of all elements in the periodic table, and has a large dynamic range (ppm to wt. %). Request this application note at http://appliedspectra.com/applications/application-notes.html

    By Applied Spectra, Inc. (ASI) based in Fremont, CALIFORNIA (USA).

  • Quantitative Analysis of Steel Using Laser Induced Breakdown Spectroscopy (LIBS)

    For steel analysis, LIBS is ideal for rapid QC (quantitative analysis and detection of contaminants) for raw materials in production, and to check the elemental composition of finished products. LIBS also offers the ability to analyze slag samples that can lead to the recovery of precious metals lost in the steel production process. Request this application note at http://appliedspectra.com/applications/application-notes.html

    By Applied Spectra, Inc. (ASI) based in Fremont, CALIFORNIA (USA).

  • Premium

    Determination of fatty acid methyl ester (FAME) content in diesel fuel or domestic heating fuel by mid-IR spectroscopy

    Introduction Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN DIESEL FUEL OR DOMESTIC HEATING FUEL BY MID-IR SPECTROSCOPY

    Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014. Lumex Instruments provides user-friendly analytical...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Depth Profile Analysis of Solid State Li-Ion Battery Device by Laser Induced Breakdown Spectroscopy (LIBS)

    This technical note highlights the ability of Laser-induced breakdown spectroscopy (LIBS) to perform depth-profiling analysis of key elements that represent the chemical makeup of important Li-ion battery components. Request this application note at http://appliedspectra.com/applications/application-notes.html

    By Applied Spectra, Inc. (ASI) based in Fremont, CALIFORNIA (USA).

  • Premium

    Chromatography laboratory instrumentation for food & beverage

    Effective measures against food fraud, efficient and healthy food processing and the development of functional food and neutraceuticals are just few of many challenges in modern F&B production and analysis. BUCHI offers classical reference methods and near infrared spectroscopy (NIRS) for food analysis, but also visualization of production processes using spray drying and encapsulation.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    SF6 Leak Detection

    Monitoring Sulfur Hexafluoride (SF6) in the Power Utility Industry. Monitoring Sulfur Hexafluoride in the Power Utility Industry The SF6 Leak Detector 3434i from LumaSense offers an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas analysis and detection. The growing environmental requirements and pressures regarding the use of SF6 make LumaSense’s system a coveted tool...

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA).

  • Premium

    Mass flow devices for analytical instrumentation

    Axetris mass flow devices are used in a variety of analytical applications: Gas Chromatography, Mass Spectrometry, Atomic Spectroscopy, Elemental Analysis, Thermal Analysis, Bioreactor and Fermentor.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Analytical instruments for mass spectrometry

    A variety of MS techniques – such as Quadrupole MS, Time-of-Flight (TOF) MS, Ion Mobility Spectroscopy (IMS), etc. have been developed in the past decades, providing new tools for materials analyses. Flow control for mass spectrometry (MS) requires high repeatability and small temperature- and pressure dependency. This is important to achieve a high resolution and instrument resolution. Depending on the size and electrical interface requirements, the Axetris MFC modules or MFC standalone types are the ideal...

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Rapid Composition Monitoring of Raw Li-ion Battery Electrode Materials Using the J200 LIBS Instrum

    Laser Induced Breakdown Spectroscopy (LIBS) provides real-time analysis of the raw materials for the Li-ion battery electrode in both powder and pressed pellet form. Please see our website to request this application note: appliedspectra.com

    By Applied Spectra, Inc. (ASI) based in Fremont, CALIFORNIA (USA).

  • Multi-Mode Gas Cluster Ion Source (GCIS) for Polymer

    Polymer materials are finding ever increasing application in numerous consumer products. Applications of polymer materials range from fields as diverse as food packaging to organic electronics and biomaterials to automotive body panels. The surface properties of these materials are often vital in determining performance of the polymer for the specific application. X-ray photoelectron spectroscopy is ideally suited to the surface characterisation of these polymer materials as it can provide quantitative...

    By Kratos Analytical Ltd. based in Wharfside, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you