stack testing Applications
-
PremiumContinuous Metals Stack Monitor (CEMs)
Cooper Environmental's Xact 640 has the unique ability to generate high time resolution metals measurement in stacks. This unique capability has the potential to qualify as a substitution for the combination of a Hg/ PM CEMs application as well as the potential for a pollution control system feedback loop that ...
By Cooper Environmental / Sailbri Cooper Inc. based in Tigard, OREGON (USA).
-
Premium
Raw-gas monitoring for scrubber optimizing
The consumption of scrubbing material in a scrubber is related to the mass flow of acid gases. Hydrogen chloride (HCl) and sulphur dioxide (SO2) are the major acid gases in an incinerator. By measuring the mass flow of SO2 and HCl in the raw gas going into the scrubber, it is possible to calculate the required quantity of scrubbing ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas monitoring instruments and systems for stack testing
assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives and regulations set. Two major parts of this on-going quality assurance cycle are the QAL2 and AST procedures. A ...
By Gasmet Technologies Oy based in Vantaa, FINLAND.
-
Premium
Gas monitoring instruments and systems for stack testing according to EPA test method 320
The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland ...
By Gasmet Technologies Oy based in Vantaa, FINLAND.
-
Stack Testing for the Aluminum Industry
ALUMINUM INDUSTRY: Performed a range of test measurements required by the promulgation of the Secondary Aluminum MACT standards. Testing included measurements of Hazardous Air Pollutants for establishing Area vs. Major Source Determinations, as well as dioxin/furan compounds associated with chlorine emissions ...
By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).
-
Stack Testing for Cement Production Facility
LIMESTONE AND CEMENT PRODUCTION INDUSTRY: Conducted a facility-wide evaluation and NSPS performance test program of a major limestone and portland cement production ...
By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).
-
Stack Testing for Power Generation Plants
POWER GENERATION INDUSTRY: Conducted detailed measurements of volumetric flow, oxygen, and carbon dioxide levels in huge main ducts in the Economizer Outlet, Air Heater Inlet, and Exhaust Stack locations in order to evaluate overall plant and control system ...
By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).
-
Stack Testing for Cement Kilns
CEMENT INDUSTRY: Performed RCRA Trial Burn and Comprehensive Performance Test Programs for multiple kilns firing hazardous waste ...
By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).
-
Stack Testing for Rod Mill Exhaust Stack
STEEL INDUSTRY: Conducted particulate testing and continuous emission monitoring of a rod mill exhaust stack. In addition, testing was performed to determine emissions associated with a slow cooling pen associated with ball mill ...
By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).
-
Stack Testing for VOC Recovery Afterburner Installation
HAZARDOUS WASTE HANDLING INDUSTRY: Conducted on-site GC speciation of VOC constituents by Method 18 collecting samples continuously around-the-clock in large vacuum canisters in order to demonstrate compliance control of a VOC recovery/afterburner ...
By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).
-
Stack Testing for Sewage Sludge Incinerators
SEWAGE TREATMENT INDUSTRY: Provided Incinerator Performance Testing Services and Relative Accuracy Testing of a Continuous Emission Monitoring system associated with sewage sludge ...
By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).
-
Stack Testing for Medical Waste Industry
INFECTIOUS WASTE INDUSTRY: Provided annual testing for metals, particulate, HCl, dioxins/furans, and typical continuous emission monitoring ...
By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).
-
Stack emission testing for tire manufacturing industries
By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).
-
Stack emission testing for power plants
By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).
-
Stack emission testing for petroleum refineries
By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).
-
Stack emission testing for hazardous waste incinerators
By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).
-
Determination of TOC in stack
PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyser which ...
By Pollution S.r.l. based in Budrio (Bologna), ITALY.
-
Liquid Chromatography for soil consultancy
in the most environmentally-friendly method possible. We offer air emission testing, emissions monitoring services and stack emissions testing to businesses of all ...
By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).
-
Mass Spectrometer for air consultancy
in the most environmentally-friendly method possible. We offer air emission testing, emissions monitoring services and stack emissions testing to businesses of all ...
By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).
-
Industrial stack emission TOC monitoring
By Pollution S.r.l. based in Budrio (Bologna), ITALY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you