Only show results in Virginia? Ok

steam plant Applications

  • Steam Traps

    Steam traps constantly fail and need replacing. Steam traps are problematic on every plant. Delta Venturi Steam Traps remove these problems, are guaranteed for 10 years and do not leak steam, ever.

    By Delta Steam Systems based in SOUTH AFRICA.

  • Environmental technology for paolyester plants industry

    For vacuum generation during the polycondensation process specially developed glycol steam jet vacuum systems are used.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Premium

    pH value and conductivity measurement for power plants

    The pH value and the conductivity have to be determined quasi-continuously at numerous locations in a power plant. The pH value is a key parameter to control the amount of lithium hydroxide that has to be added to the primary circuit of a pressurized water reactor; in water steam circuits, the pH value controls the amount of added amines. The conductivity indicates the amount of dissolved minerals. It is a measure of the water purity and is one of the most important parameters for any chemical control program in a power plant. It is determined at numerous sampling points in the power plant, for example, in the cooling water circuit, in feed and makeup water, at the outlet of the condensate pump, and in the primary circuit of a pressurized water reactor.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Water treatment for power plants

    The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine condensers, and auxiliary plant cooling water.

    The primary application of modern water treatment technology is to maintain the integrity and performance of the power plant. Critical plant applications have water purity or conditioning requirements that must be adhered to for safe, reliable and efficient power generation.

    Experience has shown that integration of water technology treatments with power plant design can be very important in reducing operational problems and component failures 

    At power plant worldwide there are increasing limitations on water availability and environmental restrictions on discharges. This is expected to promote measures for water conservation and to have an increasing influence on water treatment decisions. At power plant, the recycling of internal wastewater streams can extend from the recovery of individual high-quality waste streams, which can be reused either directly or after only limited treatment, through to the development of fully integrated water/wastewater treatment systems for zero liquid discharge. However, the application of reuse schemes requires site-specific assessment, as not all waters may be viable options for recovery.

    By De Nora Water Technologies based in Colmar, PENNSYLVANIA (USA).

  • Environmental technology for power plants industry

    Körting condensers, steam jet and water jet vacuum ejectors are established components in steam power plants. There have been innovative developments over the past decades and continously upgraded aggregates to lower energy consumption by optimising heat revovery in power stations.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Low emissions auxiliary boilers to coal or otherwise fired power plants

    Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Pumps for Asphalt / Bitumen

    DESMI has a full range of different pumps and matching equipment supporting the handing of bitumen products. Including unique features suited for today’s needs and new polymer based formulations, we have the solution. For certain applications, we can offer proven sealing options, available is also a patented zero-leakage pump with a state of the art magnetic coupling. This pump offers a total protection against spillage and vapour, which may create environmental hazards. Electrical heating is an alternative to heating by liquid or steam. Applications tend to fall into four categories: Production (refining), distribution (terminals), hot mix (paving mixtures), and roofing (filled asphalts). Refineries and terminals often use steel pumps, while hot mix asphalt plants use mainly cast iron pumps with heating jacketed, and either packing or mechanical seals. Roofing plants are generally pumping highly abrasive, filled asphalts for shingle manufacturing.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Environmental technology for evaporation industry

    Based on long-time experience and permanent development of the jet pump technology Körting is a world-wide leader with their products for heat recovery. As thermocompressors in evaporation plants or as compressors to adjust pressure levels in steam networks Körting jet pumps guarantee high energy efficiency.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Environmental technology for chilling - crystallisation industry

    For the generation of chilled water (down to 0°C) as well as for diverse crystallisation processes Körting steam jet chilling plants are used. This special chilling technique uses waste heat at a temperature level down to 80°C as motive energy. The first plants with combination of power/heat/chilling coupling are already in operation.

    By Körting Hannover AG based in Hannover, GERMANY.

  • High performance separation system for ethylene industry

    Fundamental building block chemical used in the production chain of polyethylene, PVC, styrene, ethylene glycol, vinyl acetate, linear ∂-olefins and a host of other chemical products. Eliminate hydrocarbons in Quench Water system, minimize fouling, provide greater system reliability, lower maintenance, lower energy costs. Quench water contains emulsified heavy aromatic hydrocarbon (SG = 0.975). Cracked hydrocarbons are extremely reactive. Polymerization leads to fouling of quench system, exchangers, dilution steam generator. Fouling reduces plant profitability and on-stream reliability.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Power Industry

    Our activities are closely interconnected with the energy industry. The precision casting foundry casts rotor and stator blades for gas turbines followed by precision grinding by the Industry Division. Furthermore, we also perform machining of shafts, complete blade attachment as well as subsequent assembly of steam and gas expansion turbines. PBS ENERGO, our affiliate company, focuses on the design and manufacture of steam and gas expansion turbines, including the delivery of complete plant systems. Our colleagues in První brněnská strojírna, a.s. specialise in the manufacture of boilers for various types of power plants. From design up to complex deliveries. Our products are subjected to extensive quality testing. Quality Management System according to ISO 9001 is fully implemented in our production process.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.

  • Desalination Thermal Multi Stage Flash Technology (MSF)

    Aquatech MSF ( Multi Stage Flash) Desalination technology was developed more than fifty years ago, and were some of the first to install large size MSF equipment plants in Saudi Arabia, a key market in desalination. With our depth of technological expertise and experience in operating plants, we are positioned to offer the best support in design optimization and rehabilitation of existing facilities. Uses low pressure steam as heat source Highly reliable, and simple to operate & maintain Simpler supply water pretreatment Minimum down time so, higher availability factor High purity product water Provides thermal energy efficiency similar to the MED process Operates at a top brine temperature <110 °C to minimize scaling and to prevent corrosion

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Power Generation

    Combustion turbines A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber in-between. The basic operation of the gas turbine is similar to that of the steam power plant except that air is used instead of water. The turbine shaft energy is used to drive the compressor and other devices such as an electric generator that may be coupled to the shaft. The energy that is not used for shaft work comes out in the exhaust gases, so these have either a high temperature or a high velocity. A catalyst is often used to treat these exhaust gases to comply with emissions regulations. EmeraChem has installed OEM and after-market catalyst in over 240 applications

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Desalination Thermal Multiple Effect Distillation (MED)

    Aquatech’s Multiple Effect Distillation (MED) Desalination technology, using a spray film™ design, has been developed and improved over decades of in- house research and onsite experience of such systems worldwide to provide an environmentally friendly system to meet the global challenges of a reduced carbon footprint. Production capacity up to 10 MIGD (45,500 m3/day) in a single unit: Significantly lowers electrical consumption Design flexibility to use low to medium pressure supply steam Minimum down time and therefore a higher plant availability factor High purity product water Operates at a low top brine temperature (<70 °C) to minimize scaling and to prevent corrosion Allows use of lower cost but reliable and proven metallurgy Use of Thermo Vapor Compressor to increase efficiency

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you