Only show results available in Virginia? Ok

surface water contamination Applications

  • Cooling Towers and Process Water System Cleaning Applications Using Hydrogen Peroxide

    The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms. Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher...

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Drinking water solutions for the nitrate monitoring

    Problem: Nitrate, the most stable form of nitrogen in water, is found in both ground and surface water and originates from both natural and anthropogenic sources. Due to its high solubility in water, nitrate is not filtered out from groundwater like other contaminants. Removing nitrates from source water is important as elevated levels in drinking water can cause serious health effects when ingested.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water treatment technologies solutions for point source pollution sector

    The Algal Turf Scrubber technology offers an exciting new opportunity for advanced levels of treatment for domestic wastewaters. With the high cost of nonpoint source nutrient control, hydromentia-point-sourcesecondary or AWT treated wastewater can be polished with an Algal Turf Scrubber unit, providing cost-effective nutrient load reduction. For sprayfield and rapid infiltration basins where nutrients often contaminate groundwater and result in impairments to adjoining surface waters, pre-treatment with an Algal...

    By HydroMentia, Inc. based in Ocala, FLORIDA (USA).

  • Air control for wastewater treatment aeration

    Aeration Process Introduction: Waste Water Treatment removes impurities and contaminants from a com¬munity`s sewage utilizing a number of different processes and a variety of equipment. One of the processes is the use of surface aerated basins that use aerobic micro-organisms to remove 80 to 90% of organic matter in waste water. Oxygen concentration in the water basins is a critical factor to promote the optimum micro-organism growth rate needed to treat the water in the shortest amount of time. As a result,...

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Water treatment for fruits and vegetables

    Maintaining a high quality sanitation program to prevent the ingestion of microbiologically contaminated fresh produce is of paramount importance to all food operations. Food contamination can irrevocably undermine consumer confidence, elevate irresponsible financial risk due to product recalls, or even result in loss of life and business. Even a single contaminated batch of food, one poor or erratic output can destroy your company’s reputation. Due to its broad-spectrum anti-microbial activity and versatilit...

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Solutions for the aerobic bioremediation

    BioSolve Pinkwater is used to accelerate natural bioremediation of contaminated soil either on site through surface application or on land farms through application to biopiles. When Pinkwater solution is sprayed onto and aggressively mixed into contaminated soil, hydrocarbons come in contact with the strongly “lipophilic” (oil loving) surfactant. Mimicking the process by which bacteria make hydrocarbons digestible, the surfactants “solubilize” contaminates, pulling them into an aqueous...

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Premium

    Wastewater evaporator Solutions for the machining, metal fabrication & metal finishing wastewater

    Manufacturing, metal fabrication and metal finishing require multiple washing processes to remove residue, oil, acids and other lubricants and contaminants before during and following various process steps. This generates large volumes of wastewater containing alkaline, acid solutions, heavy metal wastewaters, paint, plating residue wastewater, and other metal fabrication wastewaters. Wastewater and wash water from spills and floor cleaning must also be properly disposed. These manufacturing waste waters cannot...

    By Draygon LLC based in Venice, FLORIDA (USA).

  • Underflow Dam for Oil / Hazmat Spill Response

    In every toxic spill situations, an emergency spill response is quickly needed to prevent damages. Indeed, usually the result of an accident, a toxic spill occurs when a hazardous substance is released in an area where contamination may be harmful to the environment and the public. When an accidental spill occurs (hydrocarbons, oil or other hazardous material), it is very important for first responders to delineate a safety perimeter with adequate conditions for emergency responders to contain, quickly extract...

    By MegaSecur Inc. based in Victoriaville, QUEBEC (CANADA).

  • Pure drinking water solutions for organic food processing industry

    You go all out to produce only the best culinary creations, so how pure is your water? Water purity can have a huge impact on the flavor, aroma, visual appearance, healthfulness and even shelf life of your foods. Many beverages such as coffee and teas can be up to 99% water, so is it any wonder that water purity makes it taste so much better? When made with our pure water, alcoholic drinks don’t have the oil slick floating on the surface. Sushi masters in Japan love how our water makes sushi rice ‘pop&r...

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Premium

    Geosynthetic Lining for Highway and Civil Applications

    GCL can be used in highway and civil applications such as at airport de-icing facilities used to remove ice build up on the surfaces of planes. During the application process, glycol-based de-icing fluids can leak into local stormwater runoff, potentially causing pollution. CETCO GCLs were found compatible with de-icing fluid (glycol diluted 50/50 with water). GCLs can also be used to line roadway drainage swales for containment and prevent excessive percolation, thereby minimizing potential for groundwater...

    By Colloid Environmental Technologies Company (CETCO) based in Hoffman Estates, UNITED KINGDOM.

  • Endocrine Disruptors Oxidation

    Removal of a diverse group of organic contaminants from surface water and wastewater using ozone (O3) and O3 combined with hydrogen peroxide (O3/H2O2).

    By Newland Entech Europe based in Villaviciosa de Odón, SPAIN.

  • Cleaners for Metalworking industry

    Effective cleaning of machined or formed parts is a key step in all manufacturing processes. At IPC, we understand for a surface to be successfully plated or painted, it must first be free of contaminants. Our cleaners remove dirt, cutting oil, metal fines, flux, and other particulates from stamped metal and precision parts without the hazards associated with solvents. An economical 1-2% concentration in water is effective for most cleaning applications. Our cleaners are also proven in removing soils from filter...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Groundwater Monitoring for Construction Sites

    All construction affects groundwater and a water management plan will be required. From deforestation to urbanisation, from holes to heaps and dams to drains, they all have an affect on the groundwater. Deforestation causes an increase in the rate of run off of rainwater resulting in lower percolation of precipitation into the soil and a consequent increase in soil erosion leading to slope instability, hence land and mud slides. The increased rate of run off can cause small streams and large rivers to rise and...

    By HERON Instruments Inc. based in Dundas, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you