Only show results in Virginia? Ok

tailings Applications

  • Coal mine tailing pipe

    Advantage of UHMWPE pipe in mining and metallurgy Coke, mining powder, pulp and slag from mining and metallurgy is quite abrasive to pipelines. Traditional steel pipe can only use for 6 or 12 months for transmission of above media and need to turn 90 degrees every half year. Meantime, UHMWPE pipe has extraordinary wear resistance which greatly reduces damage of pipes from abrasion and its working life is more than 4 times that of traditional steel pipe. With good impact resistance and high flexibility, UHMWPE...

    By Shandong Buoy & Pipe Industry based in CHINA.

  • Premium

    Erosion and dust control products for mine tailings dust control

    Envirotac line of polymers have been assisting mines reduce airborne particulate matter for over 25 years. Used on tailings, Envirotac will create a tough layer of protection that will laminate soil particles in place. We have had singular applications that have been effective for over 5 years.

  • Premium

    Air pollution control for the chemical processing industry

    Anguil thermal and catalytic oxidizer systems are used on various applications throughout the chemical processing industry for emission abatement. Our experience includes applications on tank vents, amine tail gases, API separators, acid gases, inert streams and more. Regulatory Compliance Guaranteed, Seamless Process Integration, Efficient Destruction Technologies, Advanced System Controls.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Oil Spill Bioremediation

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Oil Spill Eater II (OSE) for Energy storage and fuel storage leaks

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Mining & minerals solutions for acid mine drainage industry

    Through the application of modern mining technologies, WesTech helps to assure that the byproducts of minerals extraction process are made inert, reliably contained and kept from causing environmental damage. Implementation of WesTech tailings processing technology assures protection of the groundwater, surface waters, wildlife and communities which in the past have been the victims of tailings dam leaks and levy failures.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Mining & minerals solutions for minerals processing industry

    WesTech designs and manufactures a full range of process equipment for the minerals industry in the USA and worldwide, including highly efficient HiFlo Thickeners, and Deep Bed and TOP Paste Thickeners for product concentration, tailings disposal, and CCD circuit washing. Each project is completely shop pre-assembled prior to delivery at job site. With 40 years of experience and full ISO 9001:2008 certification, we meet project deadlines and production schedules.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Mining & minerals solutions for minerals processing industry

    WesTech designs and manufactures a full range of process equipment for the minerals industry in the USA and worldwide, including highly efficient HiFlo Thickeners, and Deep Bed and TOP Paste Thickeners for product concentration, tailings disposal, and CCD circuit washing. Each project is completely shop pre-assembled prior to delivery at job site. With 40 years of experience and full ISO 9001:2008 certification, we meet project deadlines and production schedules.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Mining & minerals solutions for precious metals industry

    WesTech designs and manufactures a full range of thickeners for the minerals industry for product concentration, tailings disposal and CCD circuit washing, including HiFlo Thickeners, AltaFlo Thickeners, and Deep Bed Paste Thickeners. Design-build and turnkey projects are our specialty. Our reputation for excellence has been built one project at a time. Stateside and worldwide, WesTech provides a wide range of process equipment to help maximize the value of your resources.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Environmental dewatering solutions for mining and mineral processing

    TenCate Geotube technology provides cost-effective and efficient dewatering and containment in the mining and mineral processing industry. In mining and mineral processing (mine tailings, coal sludge, etc), TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or reduces storage footprint by sometimes 50 to 80%. Conditioners or polymers are normally used to promote flocculation to improve dewatering rates, solids retention,...

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Premium

    Mining & minerals solutions for coal preparation industry

    WesTech designs and manufactures thickeners for the coal prep industry for product concentration, tailings disposal and CCD circuit washing, including HiFlo Thickeners and Deep Bed Paste Thickeners. Paste thickening is a proven technology increasing the profitability of mining operations. In the coal preparation plant there are two applications for paste thickening: concentrating fine coal and producing paste from coal tailings for increased water recovery and elimination of tailings ponding. Paste thickeners...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Erosion and dust control products for mining

    Our Envirotac line of polymers have been assisting mines reduce airborne particulate matter for over 25 years. We have successfully chemically stabilized more acres of mine tailings in the United States than any other chemical stabilizing company. Whether it be fugitive dust on tailings, stabilizing haul roads, or making a nice durable surface for staging areas Envirotac has you covered.

  • Premium

    Hose pumps for copper mining industry

    Copper tailings - slurry is very abrasive. Centrifugal pumps with soft packing shaft seals had to be water-flushed to limit wear on the shaft sleeve. Fine until winter froze the water. Solution: a Albin Pump ALHX80, with no seals to wear out. Tailings could be continuously pumped at higher concentrations!, doubling plant efficiency. Downtime: a few minutes every 2,000 hours to change the tube.

    By Albin Pump SAS based in Montelimar, FRANCE.

  • Premium

    Amphibious multipurpose dredger for maintaining and cleaning industrial ponds

    Maintenance is easily done by utilizing Watermaster`s suction dredging capabilities and independent moving capabilities.

    Watermaster is easy to transport to the site on a trailer and from there the dredger simply walks into the pool by itself. In the pool Watermaster moves with its own propulsion system and can also move to another pool by using its excavator assembly and spuds. It can pump the mass into another pool up to 1,5 kilometres away. By backhoe work it can build and...

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Gas monitoring and dust monitoring

    EM-5 series Continuous Emission Monitoring System (CEMS) Counting tail gas emission and realtime concentration NOX SO2 O2 Temperature pressure flow dust

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Gas monitoring during industrial process

    EM-5 CEMS Coal power plant: Entrance of SCR denitration device, NOx O2 Exit of SCR denitration device: Measure remanet NH3 after reaction and avoid blocking by crystallization, NH3; Calculate denitrification rate with Nox input, NOx O2 Gas-fired power plant: Counting tail gas emission and realtime concentration, NOx O2 SO2 Temperature pressure flow dust

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • XRF analysis for WEEE compliance & RoHS

    Niton instruments offer unprecedented performance for a variety of mining and metals exploration applications, all in the palm of your hand. Examples include: Geo-Chemical Exploration. Metal exploration and assessment. Survey & Ore-Body Assessment. Mine Mapping, Development & Grade Control. Mill Heads & Tailings. Smelter Operations. Environmental Monitoring. Mining & Mineral Assessment.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • XRF analysis for metals exploration & mining

    Niton instruments offer unprecedented performance for a variety of mining and metals exploration applications, all in the palm of your hand. Examples include: Geo-Chemical Exploration. Metal exploration and assessment. Survey & Ore-Body Assessment. Mine Mapping, Development & Grade Control. Mill Heads & Tailings. Smelter Operations. Environmental Monitoring. Mining & Mineral Assessment.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you