Only show results in Virginia? Ok

tank testing Applications

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have all encouraged many manufacturers and platers to invest in automatic rinse tank control systems. Many platers using automatic control systems for the first time are pleased to discover a reduction in water usage of up to 80%.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Flaring Solutions for the Upstream Oil & Gas Industry - Tank Batteries/Storage Tanks

    The EPA mandates that all upstream oil and gas operators install factory-certified combustors that meet new Quad O compliance standards, or perform field testing on the flare system post-installation. ABUTEC offers the only compliance-ready combustors available to the market, making expensive testing no longer necessary for our customers. The use of enclosed combustors is an integral piece of the extraction process and affords companies the opportunity to operate in extreme conditions while still maintaining low emissions and following Quad O regulations.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Microbial testing for metalworking fluids industry

    Microbial Contamination Results in Less than 5 minutes! Microbial growth in metalworking fluids presents a major problem. Storage tanks, recirculation lines, filters, and other equipment can become fouled through microbial proliferation and metabolic activity, which results in a myriad of problems. These problems include compromised product quality from microbially influenced corrosion (MIC), equipment and filter plugging, and health risks from bioaerosols. The best solution to these problems is early detection and treatment. Rapid detection is now possible through LuminUltra’s Quench-Gone Organic Modified (QGO-M) ATP test kit. This advanced test kit provides the user with an accurate measure of total microbial content in any metalworking fluid in less than 5 minutes.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Premium

    TPH in Soil Remediation

    InfraCal TOG/TPH Analyzers allow for TPH (Total Petroleum Hydrocarbons) in soil testing at remediation sites such as leaking underground storage tanks and produced water evaporation ponds. Site managers can avoid having costly soil remediation equipment sit idle while waiting for off-site lab results. Sampling requires a few simple steps that can be performed by non-technical personnel. The soil is mixed with the extraction solvent, shaken, filtered, and then presented to the InfraCal Analyzer for measurement. Features include: - Results in under 15 minutes, including extraction ¨ Detect levels as low as 10 ppm ¨ Portable, rugged, lightweight, easy-to-use ¨ Battery operable ¨ Ideal for field or laboratory applications ¨ Factory calibration available

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Microbial testing for liquid fuel handling sector

    On-the-spot measurement of total microorganisms! fuel1Microbial growth in liquid hydrocarbon fuels and lubricants presents a major problem. Storage tanks, delivery systems, and filters can become fouled through microbial proliferation and metabolic activity, which results in a myriad of problems, including reduced product quality, storage system corrosion, and filter plugging. The best solution to this problem is early detection and treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing in upstream oil & gas industry

    On-the-spot measurement of total microorganisms! Microbial growth can be a significant nuisance in the upstream oil and gas sector. Well drilling, completion and stimulation activities can introduce microbes into a producing formation. Microbes found in the near well bore of producing wells can impede inflow, corrode tubulars and pumps and sour the formation. At the surface, production problems associated with microbial infection include corrosion and fouling of wellheads, pipelines, heater treaters, separators and storage tanks and bullets. The best solution to these problems is early detection and treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Premium

    Contaminated Soils with Diesel Fuel and Heating Oils

    Sitelab's UVF-3100D is used to test soil to help investigate and clean up sites contaminated by above ground or underground storage tanks (USTs). Soils can be analyzed for extended diesel range organics (EDRO) or extractable petroleum hydrocarbons (EPH). Results correlate well to confirmatory lab methods.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Fuel Monitoring & Vehicle Tracking Solution

    Our Fuel Monitoring & Vehicle tracking solution is one of the best Telematics solutions in India and our current channel partners include an European auto giant manufacturing trucks in India. Fuel monitoring is time tested for less than 1% error in fuel level detection in vehicles. It has been deployed in various Trucks, Cranes, Diesel Generators & Storage tanks.

    By ORMAT Technologies Pvt. Ltd. based in Bangalore, INDIA.

  • Construction of Containment Structures

    Manufactured synthetic lining products have allowed for efficient design and construction of containment structures such as ponds, lagoons, landfills, tanks and secondary spill containment facilities, including vapour management systems. Because of the wide variety of project conditions and materials being contained and with so many liner types to choose from, the design and selection of the appropriate lining materials can be a complex task.

    With over 25 years of experience in geomembrane containment technology, Nilex offers design assistance, fabrication, installation and construction services for containment applications. The Nilex containment technology process involves compatibility testing and the consideration of facility design and climatic factors.

    Nilex professionals will work with the owner, engineering consultant and the general contractor to ensure the optimum design with the most efficient and cost-effective installation for the containment application.

    Learn more about our products and services for Primary Containment, Secondary Containment,Tank Lining, Vapour Management Systems, Installation Services and Covers.

    By Nilex based in Edmonton, ALBERTA (CANADA).

  • Cloud software solutions for fleet operators using fuel

    The top run fleet operators use Titan software to get them down the road more efficiently. Whether it`s monitoring tank alarms in real-time, optimizing inventory across a network of both USTs & ASTs, or more efficiently managing fuel-system compliance, Titan makes heroes of fuel and environmental managers in the rent-a-car and transport industry. For starters, Titan mitigates your core environmental risks, arming you with a central dashboard and effective management tools that keep you on top of it all. This includes ATG alarms, release detection data, testing results, inspections, NOVs, and environmental-related forms, photos, and documents. Next, we hand over the key to responsible ATG network management, with on-demand tank inventory and remote gauge configuration to ensure you can effectively optimize your in-ground and above ground fuel. Finally, Titan streamlines your maintanance and work order process, linking you with site-level employees, techs, vendors, and field team members to centrally manage all facility requests in one system. In short, Titan software helps you run a better, more efficient rent-a-car or commercial fleet operation.

    By Titan Cloud Software Company, LLC based in Brentwood, TENNESSEE (USA).

  • Cloud software solutions for C-stores

    If you are compliance director, fuel executive, or facilities manager in the retail petroleum industry, we have the solutions to help you manage your world. Over 25,000 convenience store locations use Titan best-practices cloud software every day to monitor tens-of-thousands of ATGs for inventory & alarms, stay on top of voluminous compliance documentation & recurring testing dates, and optimize maintenance lifecycles to finally get a handle on facility operations. Use of the Titan cloud elevates you to a whole new realm of management efficiency. A place where there`s no more binders or spreadsheets. No more lost documents or missed deadlines. No more gaping blind spots in your ATG and tank management efforts. No more daunting piles of work orders and invoices to sort through. And no more fines or NOVs that threaten to tarnish your reputation and encroach upon already slim margins. Replacing all this is one dashboard-driven, centrally-accessible system in which to manage it all. This includes optimizing your in-ground fuel. You`ll quickly wonder how you ran your business without it.

    By Titan Cloud Software Company, LLC based in Brentwood, TENNESSEE (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you