temperature measuring equipment Applications

Related terms for "temperature measuring equipment ": temperature measuring applications

• 

  Premium

  Infrared temperature measurement for iron and steel

  LAND, acknowledged leaders in the field of temperature measurement, have supplied the iron and steel making industry throughout the world with temperature measuring equipment for over 60 years.

  By AMETEK Land based in Dronfield, UNITED KINGDOM.

• 

  Premium

  Infrared temperature measurement for Mineral Processing

  LAND, acknowledged leaders in the field of temperature measurement, have supplied the Mineral Processing industry throughout the world with temperature measuring equipment for over 60 years.

  By AMETEK Land based in Dronfield, UNITED KINGDOM.

• 

  Aerosol and particle technology for pressure & temperature industries

  The reproducibility of the devices has been approved by worldwide use. In order to avoid the condensation or vaporization of the particles during the particle measurement, the isothermal and isobaric particle generation and measurement is necessary.

  By Palas GmbH based in Karlsruhe, GERMANY.

• 

  Measurement solution for multi-stream combustion research

  Protea supplied a complete turn-key measuring system for multi-point sampling in a University combustion research laboratory. Utilising the latest in FTIR spectroscopy, atmosFIR, a complete cabinet system was supplied containing: atmosFIR FTIR Gas analyser, Sampling System Control Module (SSCM), Heated Stream Selection Module (HSSM), Temperature Control Module (TCM), 4 heated sample lines, 4 heated sample probes, Embedded PC controller.

  By Protea Limited based in Middlewich, UNITED KINGDOM.

• 

  Temperature monitoring in a rotary kiln

  Taking measurements on rotating equipment, such as a kiln or rotary table, usually requires a complex and expensive system of cabling. Even taking precautions and using specialized equipment doesn’t eliminate cable tangles and breaks. The SureCross Wireless Network eliminates complexities associated with data acquisition from rotating and moving machinery such as a rotating kilns in cement or composting industry. Crucial temperature data is acquired using a thermocouple and transmitted from the FlexPowered SureCross Nodes to a remote Gateway in the plant’s control center.

  By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).

• 

  Remote temperature monitoring

  To abide local regulations, and ensure efficient and effective composting, the temperatures of the windrows must be measured and logged constantly. With accurate temperature measurements, you can determine the optimum time to turn the windrows for quicker compost production. Time consuming and error prone manual data collection is eliminated using a SureCross FlexPower Node equipped with three thermocouples to automatically monitor the temperature at three depths within a compost windrow. Temperature sensor readings are wirelessly transmitted back to the Gateway or host system for data collection, analysis, and logging. Because the temperatures are measured and recorded continuously, the composting rows can be turned as soon as the temperature reaches the ideal point. Continuously monitoring the temperature will also provide an early warning to potential fire hazards by notifying personnel when temperatures exceed recommended ranges, thereby preserving the product.

  By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).

• 

  Gas control equipment for Life Science

  QCAL introduces CO2Control for incubators and test chambers. These gas dosing units can be adapted to nearly every incubator or test chamber. The user can set a CO2 concentration up to 30% vol. CO2. The CO2Control measures the actual concentration and adds CO2 from a CO2 gas container. The NDIR CO2-sensor has an excellent long-term stability, which provides years of stable CO2 measurement. Also the other parts as the sample gas pump, valve and fittings are designed for maintenance-free use over years. Humidity effects are compensated upto 95% rh at 37°C, also temperature effects are automatically corrected upto 50°C. The other way to control gas atmospheres in any life science equipment is to use gas mixing units GMS_2CH ( 2 channels ) or GMS_3CH ( 3 channels ) for N2, O2 and CO2. They can match flowrates up to 80 liters per minute with a concentration range up to 100 Vol% O2 and/or CO2.

  By QCAL Messtechnik GmbH based in Oberostendorf, GERMANY.

• 

  Thin-film Measurement Technology for Appliance Industry

  Measurement and control is an essential element in the success of products in the consumer appliance industry. Precise temperature measurement in cooking equipment along with flow control in cleaning equipment are crucial to the proper functioning of different appliances. IST’s thin film platinum temperature sensors are ideal for the long term precise measurements required by many of these devices. They are also capable of measuring extremely high temperatures at which some appliances operate. IST’s flow sensors, with the ability to measure pressure differential and flow direction, are more than capable of meeting the needs of products in the appliance industry.

  By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

• 

  Premium

  Tunnel solutions for the visibility monitor

  The TunnelTech 101 Visibility Monitor (VIS), is an essential part of any road or rail tunnel safety system. It monitors the Visibility within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air for drivers to clearly see the road ahead. The TunnelTech 102 Cold smoke monitor (CSM detects smoke from a fire to rapidly warn the operator of the hazard. Secondly, used in combination with other TunnelTech 101 VIS monitors, the operator can quickly detect the locus of the fire if it is also equipped with the optional PT 101 temperature sensor to accurately measure ambient air temperature in a range of -15 to 1050C.

  By Codel International Ltd based in Bakewell, UNITED KINGDOM.

• 

  Premium

  Multiparameter Monitoring for the Defense Industry

  Our COTS (commercial off the shelf technology) approach to military requirements ensures some of the very best sensor technology available to measure speed of sound, temperature, depth, conductivity, salinity and density on both surface vessels and submarines.  Valeport equipment in both standard and bespoke formats is in regular operational use by many Navies worldwide.  Standard equipment can be re-packaged to suit your needs and replace legacy equipment.  

  By Valeport Ltd based in Totnes, UNITED KINGDOM.

• 

  Premium

  Surface water quality testing for the environmental monitoring industry

  Aquaread stock a wide range of testing equipment designed to track a number of parameters and water quality testing measures. These can be used in many different bodies of water, including rivers, lakes, streams and seawater. The advantages of tracking water quality and testing for numerous parameters means that it is easier to notice changes which could cause damage to aquatic ecosystems. Early detection not only helps with monitoring water quality, but also helps to put mitigating measures in place. We have a wide range of parameters, although the most popular of these allow for surface water testing, pH, temperature, electrical conductivity and measuring levels of dissolved oxygen. These are standard measurements included in most standard Aquaprobes, although if you require more specific parameter testing then there are a number of additional parameters which can be added onto to the base Aquaprobe to compensate this.

  By Aquaread Limited based in Broadstairs, UNITED KINGDOM.