Only show results available in Virginia? Ok

temperature monitoring system Applications

  • Temperature monitoring in a rotary kiln

    Taking measurements on rotating equipment, such as a kiln or rotary table, usually requires a complex and expensive system of cabling. Even taking precautions and using specialized equipment doesn’t eliminate cable tangles and breaks. The SureCross Wireless Network eliminates complexities associated with data acquisition from rotating and moving machinery such as a rotating kilns in cement or composting industry. Crucial temperature data is acquired using a thermocouple and transmitted from the FlexPowered SureCross Nodes to a remote Gateway in the plant’s control center.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Remote temperature monitoring

    To abide local regulations, and ensure efficient and effective composting, the temperatures of the windrows must be measured and logged constantly. With accurate temperature measurements, you can determine the optimum time to turn the windrows for quicker compost production. Time consuming and error prone manual data collection is eliminated using a SureCross FlexPower Node equipped with three thermocouples to automatically monitor the temperature at three depths within a compost windrow. Temperature sensor readings are wirelessly transmitted back to the Gateway or host system for data collection, analysis, and logging. Because the temperatures are measured and recorded continuously, the composting rows can be turned as soon as the temperature reaches the ideal point. Continuously monitoring the temperature will also provide an early warning to potential fire hazards by notifying personnel when temperatures exceed recommended ranges, thereby preserving the product.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Monitoring systems for farming applications

    Farming applications can be managed via our systems thanks to multiple input/output capabilities. Vital systems like temperature monitoring and automated feeding systems to name a few. The low initial cost and maintenance of our systems is perfect to either improve or extend the life of existing infrastructures making this a valued addition to any farm operation.

    By Atookoo inc. based in Sherbrooke, QUEBEC (CANADA).

  • Gas monitoring and dust monitoring

    EM-5 series Continuous Emission Monitoring System (CEMS) Counting tail gas emission and realtime concentration NOX SO2 O2 Temperature pressure flow dust


  • Premium

    Emissions Monitoring for Mining / Emissions Monitoring for Smelting

    The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions monitoring.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Gas monitoring instruments and systems for DeNOx process control

    In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power plants.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Analysis of aqueous solutions

    IR-Spectroscopy is not limited to gases, solid materials and pure liquids but also facilitates the measurement of solutes in aqueous media. Though, due to the strong and temperature dependent absorption of water, the usage of conventional IR-transmission and ATR accessories is not very suitable for the analysis in water. The CONFOCHECK is a dedicated FT-IR system for the fast, easy and sensitive analysis of aqueous samples. Using this system, preparing, measuring and evaluating any aqueous sample takes typically about 1 minute.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Premium

    Continuous emissions monitoring for chemical industry

    Process control and emissions monitoring in a chemical plant is a challenge due to corrosive gases, high dust load, and high temperatures. To use an extractive system in this environment will demand a lot of maintenance.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Continuous emissions monitoring for glass manufacturing

    Process control and emissions monitoring in a glass manufacturing plant is a challenge due to high temperature in the flue gas. The OPSIS DOAS system provides the glass industry with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method that uses an optical path to measure across the duct.

    By Opsis AB based in Furulund, SWEDEN.

  • Closed Vessel Digestion of Soil

    Aurora`s TRANSFORM series of microwave digestion systems, offers high-pressure and temperature systems in order to increase reaction rates and decrease digestion times for sample preparation for trace metal analysis in soil.

    By Aurora Biomed Inc. based in Vancouver, BRITISH COLUMBIA (CANADA).

  • Premium

    Measurement solution for multi-stream combustion research

    Protea supplied a complete turn-key measuring system for multi-point sampling in a University combustion research laboratory. Utilising the latest in FTIR spectroscopy, atmosFIR, a complete cabinet system was supplied containing: atmosFIR FTIR Gas analyser, Sampling System Control Module (SSCM), Heated Stream Selection Module (HSSM), Temperature Control Module (TCM), 4 heated sample lines, 4 heated sample probes, Embedded PC controller.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Incineration Industry Emissions Monitoring & Analysis

    Monitoring of emissions from incinerators is a demanding application for Continuous Emission Monitoring Systems. The emissions produced are highly corrosive, some of the gases are soluble and, because the waste being burnt is constantly changing, the resulting stack gas temperature varies widely.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you