Only show results available in Virginia? Ok

thermal energy Applications

  • Residential and Commercial, Underground Thermal Energy Storage

    PROJECT OVERVIEW: Large residential and commercial project in London, overlooking the Thames. A 2.9MW cooling and heating aquifer thermal energy storage system for five mixed-use buildings including over 200 luxury apartments.

    By Boode Waterwell Systems based in Zevenhuizen, NETHERLANDS.

  • Markthal: Aquifer Thermal Energy Storage

    PROJECT OVERVIEW: The iconic Markthal in Rotterdam. Supply of unique 0.4mm vertical slot PVC screen for the Aquifer Thermal Storage Energy system at Markthal, a 95,000m2 residential and commercial building with an indoor market hall.

    By Boode Waterwell Systems based in Zevenhuizen, NETHERLANDS.

  • Flow & Energy Management Solutions for power & thermal plant

    Spire Metering is a great fit for Power Plant, Thermal Energy Production Plants.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Thermal structures insulation for power generation industry

    Whether you’re generating power for a single job site or hundreds of thousands people, power generation is a mission critical application. Thermal Structures products offer the extreme performance, durability and ease of installation that power generation requires.

    By Thermal Structures, Inc. based in Corona, CALIFORNIA (USA).

  • Industrial Solution for incineration & thermal treatment

    Waste incineration, including solid municipal and hazardous waste, biomedical waste and hazardous liquid are all continually under more stringent scrutiny by regulators. Macrotek has designed and supplied many integrated systems to meet most guidelines. In several installations, hazardous waste has been combined with radioactive waste, requiring nearly non-detectable emission levels for many of the contaminants. Macrotek has installed and tested systems for these processes with the results significantly better than required standards.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Thermal mass flowmeter solutions for energy, natural resources industries

    Flow costs money! Sierra prides itself as being a leader in energy and natural resource measurement. Sierra’s thermal flowmeters provide precise flow measurement solutions for a variety of industrial and energy-related applications. In the drive toward discovering alternative energy sources, accurate thermal flowmeter readings of gases is critical for many energy-related processes such as flare gas measurement, cogeneration, biogas measurement, district energy applications, clean coal technology and many more.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Analytical instruments for thermal analysis

    A variety of thermal analysis techniques, such as Thermo Gravimetric Analysis (TGA), Differential Thermal Analysis (DTA) and Differential Scanning Calorimetry (DSC) rely on high-performance mass flow control.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Medical Waste Processing

    Presently, Medical Waste Processing has different ways, such as sanitary landfill, incineration by pyralysis, autoclave sterilization, chemical disinfection, microwave sterilization, thermal decomposition, and plasma process, ect. Harden Machinery has lots of experience in medical waste processing, we offer kinds of professional shredders to handle the processing. The medical waste can be shredded into uniform in size, which is smaller than 50mm to improve the incineration efficiency. Harden’s Medical waste crusher has good sealing and corrosion resistance. Cutter blades made of German alloy material, ensure good resistance and high impact strength, It meets the high degree of mixing medical waste requirements to shred stainless steel equipment, prosthetics and other metal products. Medical waste processing system has a reasonable blades layout and high pass rate of the screen structure to ensure the crusher is not blocked.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Anaerobic Digester for Biogas Plant

    Glass fused to steel tank is made by a special process, called vitreous enamel coating ,which is an advanced technology for anti-corrosion purpose of steel plate. Tanks are coated both inside and outside with enamel .Today, glass fused to steel tank is widely used in wastewater treatment projects as aerobic and anaerobic reactors of UASB,EGSB,SBR,BAF,USR,CSTR, and equalization tank, clarifier, and sludge holding tank. It has proven its superior resistance to thermal and chemical when facing water with extremes in pH and temperature.

    By Center Enamel Co,.Ltd based in Guangzhou, CHINA.

  • Desalination Thermal Multi Stage Flash Technology (MSF)

    Aquatech MSF ( Multi Stage Flash) Desalination technology was developed more than fifty years ago, and were some of the first to install large size MSF equipment plants in Saudi Arabia, a key market in desalination. With our depth of technological expertise and experience in operating plants, we are positioned to offer the best support in design optimization and rehabilitation of existing facilities. Uses low pressure steam as heat source Highly reliable, and simple to operate & maintain Simpler supply water pretreatment Minimum down time so, higher availability factor High purity product water Provides thermal energy efficiency similar to the MED process Operates at a top brine temperature <110 °C to minimize scaling and to prevent corrosion

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Biogas measurement for the waste to energy industry

    In a recent project and the subject of this paper, Kurz engineers conducted a study that lead to a unique, new design that allows thermal flow meters to perform accurately within a wet digester gas environment. The testing environment applies to landfill and digester applications.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Mercury Removal from Ash

    A by-product from burning pulverized coal in electric power generating plants, fly ash can contain substantial levels of mercury which can negatively impact human health and the environment. Responding to the threat of mercury exposure, the EPA has established tough standards for the power industry to meet. Vulcan® Systems Thermal Desorption Units remove mercury from fly ash, making the end product reusable for concrete production. Through this process, power plants are able to create a new revenue stream through the sale of clean fly ash, eliminate expensive disposal costs, and protect the environment. Besides solving the disposal problem, adding fly ash to concrete improves the quality of the concrete. As a replacement for Portand Cement, the use of fly ash saves on material expenses, decreases permeability, and prevents expansion, thermal cracking, and efflorescence. It also increases working time, and makes pumping and finishing much easier.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Actuators for the power generation

    As well as traditional power stations, applications for Rotork products are found on renewable energy generation such as solar thermal plants and on CO2 emissions reduction processes such as flue gas desulphurisation and carbon capture and storage.

    By Rotork based in Bath, UNITED KINGDOM.

  • Premium

    pH value and conductivity measurement for power plants

    Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable energy on the grid requires powerful energy storage and conversion devices, such as supercapacitors, batteries, or fuel cells.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Energy from the anaerobic wastewater treatment for the Food and Beverage industrial sector

    Industrial wastewater characterized by an high COD content are an interesting renewable source for the Food and beverage industrial sector which can have them readily available from their industrial processes. The COD contribution in the wastewater can be easily converted in biogas and then in green energy to reuse inside the factory as both electrical energy and thermal energy. This process can be applied with the installation of the UASB technology, implemented by Hydroitalia - Colsen in new and existing plants.

    By Hydroitalia - Colsen Srl based in Medicina, ITALY.

  • Premium

    Petrochemical

    Durable regenerative thermal oxidizer (RTO) technology is at the core of our systems. MEGTEC designs and engineers system solutions to meet your special requirements, ranging from energy-efficient treatment of dilute volatile organic compound (VOC) flows, such as tank ventilation, to demanding applications utilizing VOC energy for secondary heat recovery; for example, in the form of process streams. This can include pre- and tail gas treatment systems, and could handle hazardous components such as sulphurous or chlorinated hydrocarbons. For special requirements, we can offer FTO (flameless thermal oxidation) and we can design systems operating safely on oxygen contents below 5%.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Cogeneration (digester & landfill gas) flow solutions

    As an industry leader in Clean Energy flow applications, our thermal mass flow meters are used extensively in measuring digester and landfill gas, making electricity from waste.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Coating and Laminating

    MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

    By econ industries GmbH based in Starnberg, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you