Only show results available in Virginia? Ok

turbidity water treatment Applications

  • Turbidity Monitoring

    The monitoring of Turbidity is key requirement of the water industry in both water supply and water recovery systems. Within the water supply process, monitoring of turbidity allows operators to assess the efficiency of filters for particulate removal through the process. Similarly, with water recovery (Waste Water Treatment Works), the measurement of turbidity is a key parameter to track the removal of particulate through the process. CTG can provide turbidity measurements with the UniLux sensor, or provides turbidity as one of the parameters available within the 3 channel TriLux. For applications requiring turbidity measurements compliant to ISO07027:1999, CTG can offer the TurbiLux Nephelometer.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Water Treatment Solutions for Turbidity Removal

    Turbidity is a measure of the loss of light transmittance through a liquid due to suspended particles. The more particles in the water, the murkier it looks or the higher the turbidity. This is a measure of the quality of the water. It is measured in units called Nephelometric Turbidity Units (NTU). Turbidity can be caused by run off after a heavy rain as erosion washes soil into a river or lake. It is often increased in the spring and fall when the water temperature at different levels in a lake change causing a turnover of those levels, bringing sediment, plants, and algae to the top.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Advanced Ultrafiltration Modules

    The Q-SEP Ultrafiltration membranes incorporate high-strength, hollow fibers that deliver superior performance without the risk of fiber breaks. They are made from a hydrophilic polyether sulfone material with excellent low fouling characteristics. These hollow fiber membranes operate under a pressurized inside-out flow configuration for superior performance. These hollow fiber UF membranes offer reliable removal of turbidity, microorganisms & viruses. Turbidity can be reduced to less than 0.05 NTU. Typically, a 6-log removal for bacteria, giardia & cryptosporidium, while a 4-log removal for viruses, can be achieved. The Q-SEP modules contain an advanced UF fiber, prepared by an innovative patented cloud point precipitation method. This method ensures a very uniform pore size distribution and high pore density in the membrane. As a result, the product water quality from the modules is significantly better than the quality from conventional UF modules at a very operating pres

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Process Analytics - Wastewater Applications

    Control of wastewater is increasingly becoming important to avoid potential environmental and increasing legal consequences. Accurate pH, O2, conductivity and turbidity measurements are critical in modern wastewater treatment. METTLER TOLEDO offers reliable, cost-effective solutions to control industrial effluents.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • EPR waste minimisation monitoring for wastewater treatment industry

    The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a point scoring system to assess operators under the OMA-3 program and this will be used to identify how well a company is managing their processes and possibly identify areas for improvement. The Environmental Permitting Regulations require industry to install instrumentation (MCERTS approved where available) to report water quality. EPR compliance monitoring may include automatic water sampling, flow measurement, pH, turbidity and TOC water analysis. Industry will need to identify point of source emissions, take steps to correct inefficient control and alarm unacceptable process deviations. Although the legislation focuses on environmental improvement, good housing keeping also makes a lot of sense. Optimisation of process control minimises waste, reduces treatment costs and ultimately saves money.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you