Only show results available in Virginia? Ok

used air pollution control system Applications

  • Gas detection analyzers for pollution control

    Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another way.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    Air pollution control for ventilation air methane industry

    Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM).  The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG.  As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat.  Landfills and mines represent two of the most abundant sources, however reports indicate that more than 50% of all VAM is exhausted from mine ventilation systems and remains unutilized.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Air pollution control for the textiles industry

    Companies that use solvent based inks, dies, or coatings in the textile manufacturing process – commonly incorporate from filtration systems in the control plan.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Air Pollution Control Solution for the FGD - SO2

    Flue Gas Desulfurization (FGD) involves the removal of sulfur dioxide and other acids from flue gases. Typical sources of acid gases include fossil fuel boilers, waste combustors, and other industrial applications such as refining and smelting. The Macrotek wet and dry FGD systems can achieve over 99% acid removal by using a variety of reagents, including caustic, sodium carbonate, lime and limestone, and waste alkaline solids or liquids.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Ethanol and Biofuels

    Controlling the VOCs and CO emissions produced in the feed dryers (wet and dry milling), coupled with the particulate matter being introduced and the need for the reduction of NOx are just the start of having a successful abatement solution. The challenges of smooth pressure control that reduces dryer fluctuations and plug resistant media that lessen the frequency of bake-outs are also part of a successful abatement system and we have the solutions. Our engineered oxidation systems provide reliable performance with minimal maintenance requirements. Externally accessible valve bearings and other critical components are kept out of the corrosive moisture-laden streams extending the life of the equipment and facilitate maintenance intervals. Our simple oxidizer designs control your emissions with minimal facility intervention and allow us to provide you with reliable and dependable equipment.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Air pollution control for the chemical processing industry

    Anguil thermal and catalytic oxidizer systems are used on various applications throughout the chemical processing industry for emission abatement. Our experience includes applications on tank vents, amine tail gases, API separators, acid gases, inert streams and more. Regulatory Compliance Guaranteed, Seamless Process Integration, Efficient Destruction Technologies, Advanced System Controls.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Wood Products

    MEGTEC is a leader in providing regenerative thermal oxidizers (RTO) for VOC control for products such as OSB, MDF, SYP, plywood, particleboard, wood pelletizing and other engineered wood products, with particular expertise in solving the problems of media plugging and alkali attack associated with wood dryer exhaust. With thousands of systems installed worldwide in many process industries, MEGTEC has the knowledge to provide you with the best solution for your specific needs. MEGTECā€™s designs are modular and cleanable, using alkali-resistant ceramics and corrosion-resistant materials of construction.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Industrial air pollution control for the forest products

    Wood is one of the world`s oldest and most important raw materials. Apart from applications in the furniture and building industry and related sectors, CTP systems are used for air purification in the production of  lumber products such as  plywood panels, fibre boards (particle boards, MDF, OSB) and compressed wooden parts.

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with emission capture, control and compliance hurdles that composite and carbon fiber producers face. We specifically address the needs of our carbon fiber customers with proprietary oxidizer designs for furnace and oven emissions. Our systems are recognized for energy efficient operation and destruction capabilities by the U.S. Federal Government at their Oak Ridge National Laboratories (ORNL). Anguil continues to help producers drive down energy consumption and emission output through our participation in The Beacon, an initiative at the forefront of green manufacturing practices for fiber production.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Air pollution control for the soil remediation industry

    Treatment of exhaust gases from systems that process polluted or contaminated soil – commonly use incinerators for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Air pollution control for the converting, coating industry

    Companies that coat paper, film, or foil webs with solvent coatings or silicone coatings – commonly use thermal oxidizers and heat recovery systems for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Low concentrations monitoring of benzene and aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    With over 15 years of experience in the measurement of volatile organic compounds (VOC), Environment SA announces the VOC72M, a new generation analyzer for the measurement of BTEX compounds by gas chromatography with photo-ionization detector (PID). The VOC72M can handle up to 40 compounds and eight configurations for analysis. This compact and fully automated analyzer with wide voltage range specifications (90-240V) provides equivalent performance to the laboratory chromatographs and is particularly suited to fixe or mobile ambient air quality monitoring laboratories. The VOC72M is fitted with a PID detector new generation, much more sensitive, more stable and whose lamp does not need to be cleaned; the analyzer integrates flow control fittings a 3 levels security system built on and uses only one gas (nitrogen). This robust and low maintenance instrument performs all the functions (sampling, analysis and data management) in a simple and completely autonomous mode. It is a particular

    By Environnement S.A based in Poissy, FRANCE.

  • Premium

    Measurement solution for medical workplace monitoring

    In taking a responsible stance on the exposure of workers to any potential hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air. Anaesthesia machines, ventilators, breathing systems and waste gas scavenging systems will all contribute to te background level of he anaesthetic gases that are present in the environment within a facility, whether those machines are in a good state of repair or not. Recovery rooms can become polluted, for example from gas exhaled by the patient, and clean-up from any spills can remain in the background air for long periods.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you