Only show results available in Virginia? Ok

utility locating Applications

  • Vacuum excavation solutions for locate underground utilities / soft dig / pot holing

    Vacuum excavation is fast becoming a best practice in the field of construction and site excavation. Why? Because it uses jets of air (air excavation) or water (hydro excavation) to loosen soil, instead of a heavy metal claw. After loosening, the soil is pulled out of the ground through an air vacuum hose to a debris tank for later disposal or back-filling. Using non-destructive technology can quickly, safely and economically excavate in areas inaccessible to conventional digging equipment like backhoes and trenchers.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Stack Testing for Power Generation Plants

    POWER GENERATION INDUSTRY: Conducted detailed measurements of volumetric flow, oxygen, and carbon dioxide levels in huge main ducts in the Economizer Outlet, Air Heater Inlet, and Exhaust Stack locations in order to evaluate overall plant and control system performance

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Premium

    Advanced water purification technologies for power generation sector

    SnowPure has been providing EDI technology to the power plant market since 2002. Power plants around the globe are utilizing our Electropure EDI including locations in the United States, Central America, Europe, the Middle East, and China. With the introduction of our higher-capacity EXL product we are now able to serve a greater share of the power plant market including larger installations.

    By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA).

  • Premium

    Measurement of methyl bromide in ambient air for monitoring workplace exposure limits in fumigation facilities

    The Series 8900 Methyl Bromide Monitoring System provides an automated, direct measurement of Methyl Bromide in ambient air. This instrument can meet and exceed the requirements for ambient methyl bromide monitoring. It is utilized in fumigation facilities and industrial plants to detect potential worker exposure to methyl bromide, resulting from mechanical failure, human error or product off gassing. Multipoint sampling options allow the analyzer to monitor multiple sample locations for greater coverage.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Gravity Main Sulfide Odor Control with Hydrogen Peroxide

    Gravity main sewer systems include major trunk lines and the tributaries that feed them. Hydrogen sulfide (H2S) odor builds up in the collections system as the flows collect from upstream reaches and become larger, deeper and more septic (oxygen depleted) in the downstream reaches more near to the wastewater treatment plant. In general, most of the more significant hydrogen sulfide odor and corrosion control problems occur in the major trunk systems segments conveying flow to the plant. Therefore, selection of sulfide treatment for gravity systems has several options depending mainly on: Duration of control required Degree of septicity (oxygen depletion) Location of target control points or "hot spots" Location of available dosing points upstream of "hot spots" Availability of civil infrastructure and utilities Sensitivity to hazardous chemicals

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • KRYSTAL KLEEN CAR WASHES REMOVES WATER SOFTENERS AFTER SCALEWATCHER INSTALLATION

    Krystal Kleen Car Washes in Hoover, Alabama has removed the water softeners from its three self-service car washes following the installation of the computerized, electronic, water-conditioner Scalewatcher® from Scalewatcher North America. This has not only saved the company thousands of dollars a year in salt but also provided a short-term payback on the units. Krystal Kleen Car Washes is located in a hard water area, with Total Alkalinity of around 200mg/L. This necessitated Jim LeNoir, owner of Kyrstal Kleen Car Washes, using water softeners at his three premises to prevent scale formation and water spotting on the cars. “I decided to try Scalewatcher at Montevallo since this was the hardest water location of the three”, said Jim LeNoir. “I stored the water softener just in case it was needed. However, after a year the Scalewatcher was working just as efficiently as the water softener and the customers were happy. Next installation was at Calera with the same results and finally at Homewood which has a spot free rinse system.” All car washes, including conveyor or rollover; high-pressure touchless automatics and self-serve bays, use water as the primary means of removing the dirt, road grime, salt, and snow off the surface of the vehicle during the wash process. Water softeners are the mainstay in the wash industry, providing a means of removing the hard mineral deposits that prevent soap from working efficiently. Water softeners are utilized to overcome the calcium carbonate that is the primary component of water hardness. However, in many States now, including Southern California, municipalities and water departments are severely limiting, and in some cases prohibiting, the use of salt-regenerating water softeners due to concern regarding the increased levels of salt in ground water. The award-winning Scalewatcher system not only helps car washes meet these regulations by minimizing salt usage but also saves money on salt purchase and has the additional benefit of removing scale from lines and nozzles. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “All the water softeners have now been removed freeing up much needed space and saving me money. Best of all I no longer have to haul salt pellets”, concluded Jim LeNoir. Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 80 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you