vacuum distillation Applications

Mass transfer and chemical separations applications for crude oil refineries

Crude Oil Distillation (Atmospheric), Vacuum Distillation, Liquified Gas Production, Sour Water ...

By Raschig USA Inc. based in Arlington, TEXAS (USA).

Industrial wastewater solutions for the used rinse water

Cleanliness is the most important success factor when cleaning parts and surfaces. As it depends heavily on the quality of the rinse water used, looking after the individual rinses requires particular attention. Leading companies are already using vacuum distillation systems to treat used rinse water. And you too ...

By H2O GmbH based in Steinen, GERMANY.

Industrial wastewater solutions for painting pre-treatment

Crystal-clear distillate. For optimum painting pre-treatment results. Are using vacuum distillation systems to recondition rinse water during paint pre-treatment. The advantage of this type of system lies in the quality of the reconditioned rinse ...

By H2O GmbH based in Steinen, GERMANY.

Industrial wastewater solutions for stainless steel pickling wastewater

VACUDEST vacuum distillation systems. Premium technologies for stainless steel pickling. through stainless steel surface pickling processes, protecting the stainless steel from corrosion. This generates rinse water whose toxic contents make it impossible to discharge. It must either be treated or disposed of at ...

By H2O GmbH based in Steinen, GERMANY.

Petroleum Refining & Water Treatment

The largest volume effluents in petroleum refining include “sour” process water and non-oily/non-sour but highly alkaline process water. Sour water is generated through a number of processes, such as: - Desalting - Topping - Vacuum distillation - Pretreating - Light - Middle distillate ...

By Advanced Filter Systems based in ILLINOIS (USA).

Premium

Hazardous waste treatment solutions for oil and gas industry

, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum ...

By econ industries services GmbH based in Starnberg, GERMANY.

Industrial wastewater solutions for vibratory grinding wastewater

of with specialized waste management companies expensivly. But there are alternatives: Vacuum distillation with VACUDEST evaporators is an economical, resource-friendly method for treating this industrial wastewater. It conditions the vibratory grinding wastewater in such a way that it can be reused in the ...

By H2O GmbH based in Steinen, GERMANY.

Industrial wastewater solutions for container cleaning wastewater

able to cope with all conceivable contaminants. Reconditioners are increasingly using modern vacuum distillation systems to do this. They work fully automatically, guarantee a high level of process reliability, minimal residue, and render a zero liquid discharge container cleaning ...

By H2O GmbH based in Steinen, GERMANY.

Premium

Chemical water treatment for refinery

Deposits and corrosion as well as undesired emulsion, foam and toxic gases impact the operation and the occupational safety in refineries. Kurita provides tailored treatment concepts to increase the operational and the occupational safety. Our product lines and technologies are based on decades of experience in process treatment and they contribute to reduce your total operating ...

By Kurita based in Tokyo, JAPAN.

Process design & engineering services for refinery & petrochemical industry

On a large or small scale, Proxion Process fully understands the intricate details of refineries & petrochemical pants. We have extensive experience in optimising the design, procurement and construction of all refinery facilities, including distillation, hydro-processing, fluid catalytic cracking, coking, ...

By Proxion Process based in Manchester, UNITED KINGDOM.

Premium

Hazardous waste treatment solutions for chlorine industry

The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine ...

By econ industries services GmbH based in Starnberg, GERMANY.

Premium

Hazardous waste treatment solutions for site remediation

The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from ...

By econ industries services GmbH based in Starnberg, GERMANY.

Industrial wastewater solutions for spent release agents from die-casting

Die-casting: Low-cost treatment of spent release agents instead of disposal. Release agents are essential aids in preventing production disruptions and ensuring the quality of the produced parts in die-casting processes. These used agents, which are emulsified in the operational effluent from the foundry, cannot be discharged into the public sewer system. They are specialised companies usually disposed of expensively by specialized waste management companies, together with other operational ...

By H2O GmbH based in Steinen, GERMANY.

Industrial wastewater solutions for contaminated landfill leachate

Reliable treatment. Optimised for heavily contaminated landfill leachate. Whether it be household rubbish, construction rubble, contaminated soils, port sludge or waste incineration ash, final storage of these heavily contaminated materials poses a potential groundwater pollution risk from heavy metals, nitrogen bonds or organic substances. Landfill leachate resulting from precipitation on landfill ...

By H2O GmbH based in Steinen, GERMANY.

Industrial wastewater solutions for electroplating wastewater

Reliably distilling complex and heavy metals: VACUDEST in electroplating applications. No company applying electroplating likes having to deal with the issue of “wastewater”. But what happens when authorities take samples of the wastewater unannounced, and finds the nickel limit has been well ...

By H2O GmbH based in Steinen, GERMANY.

Industrial wastewater solutions for clearcat crystal-clear distillate from used coolant emulsions

Metal-working factories generate a lot of oily effluent as a result of manufacturing processes. The coolant emulsions tailored to the individual application contain oils, waxes, greases and preservatives, as well as a cocktail of ingredients to improve product properties. The emulsions used must not be discharged untreated into the drain system or open bodies of water; they must be disposed of at high ...

By H2O GmbH based in Steinen, GERMANY.

Industrial wastewater solutions for vehicle and transport cleaning water

Reliable and effluent-free: VACUDEST in vehicle and transport cleaning. Means of transport have to be one thing above all else: Safe. That’s why the vehicles regularly undergo strict quality checks. They are thoroughly maintained, serviced and repaired, and this of course also includes careful cleaning. Effluent is produced which, due to the high degree of contamination, cannot be discharged into the public sewer system. It contains oil, grease, detergent and other impurities. This effluent is very expensive ...

By H2O GmbH based in Steinen, GERMANY.

Flat Sheet Membranes for Membrane Distillation

Novamem provides specific membranes for membrane distillation. These membranes even perform if used under significant pressure. Thanks to the small pore sizes, it is also possible to perform membrane distillations with weaker hydrophilic-hydrophobic interaction. In other words: hydrophobic retention is much ...

By Novamem Ltd based in Schlieren, SWITZERLAND.

Industrial wastewater solutions for crack detection wastewater

Tracking the tiniest cracks – with H2O wastewater treatment. Heavy use, material fatigue and material faults can cause tiny cracks in plastic and metal parts. These are so small that they are invisible to the naked eye. But they can still be relevant to safety, e.g. on the wings of passenger jets. That’s why these parts are regularly checked for micro cracks. One way of doing this is the dye penetration process, where the part to be checked is first thoroughly cleaned. Applying a special dye and using ...

By H2O GmbH based in Steinen, GERMANY.

Gas analysis instruments for hydrocarbon processing

Hydrocarbon Processing is one of the most demanding industries in the world. High levels of productivity must be achieved while constantly maintaining the very highest safety standards. Effective gas analysis is a critical component of all HP processes, typically requiring a wide range of measurements to ensure the safe, optimized running of the ...

By Servomex - a Spectris Company based in Sugar Land, TEXAS (USA).