Only show results available in Virginia? Ok

vapor control Applications

  • Premium

    Water Vapor Permeation Analyzers for Packaging Industry

    For packaging film barriers, the Systech Illinois range of water vapor permeation analyzers offer a wide measurement range with precision temperature, humidity and flow control. These analyzers utilise the Coulometric P2O5 sensor, which is more sensitive and stable than infra-red and does not require calibration. The P2O5 is the primary method for absolute moisture measurement.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    Odor Control for Composite

    A Single Solution To Manage Composite Odors

    Many resins used in the composite industry emit styrene vapors which are considered hazardous in high concentrations and whose odor is an unpleasant nuisance. This gas is categorized as a volatile organic compound (VOC) and listed by the United States Environmental Protection Agency (US EPA) as a Hazardous Air Pollutant (HAP). Styrene is considered highly reactive in the atmosphere and may contribute to smog formation and the production of secondary air pollutants.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odor Control for Liquid Waste

    Vaporize Odors Associated With Liquid Waste Processing

    Liquid waste, such as fats, oils and grease (F.O.G.) can emit unpleasant odors, which become even more pronounced in various stages of processing. Malodorous F.O.G. from restaurants are often transported by truck to F.O.G. filtering facilities and then to plants where they are processed into useable byproducts.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Air pollution control for the remediation industry

    Thermal and catalytic oxidizers are one of the primary vapor treatment technologies used in purifying harmful compounds from contaminated groundwater or soil.  Global Technologies is the remediation division of Anguil Environmental Systems focused on treating emissions that are extracted from below the earths` surface.  Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Gas monitoring instruments and systems for fumigation

    Sea cargo containers and wooden packing materials are fumigated to control the spreading of pest animals and micro-organisms. Fumigant gases are toxic and measurements are carried out as a health and safety precaution. Measurements are required by e.g. customs inspectors prior to opening containers, making the shipping companies responsible for carrying out measurements. Products shipped in containers may release VOCs from e.g. solvents and glues used in manufacturing process. The concentrations of vapors may be significant in the confined space of the container. While most containers originate in China and Southeast Asia, cargo container measurements are done in ports across the world, as the same gases are encountered in all ports.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen dioxide NO2, as well as water vapor H2O, nitrous oxide N2O, carbon monoxide CO, carbon dioxide CO2 and ammonia NH3. The fixed installation products for these purposes are the Gasmet™ CEM II measurement system, and the Gasmet™ FCX Gas Analyzers, both of which utilize the FTIR measurement technique for simultaneous multicomponent analysis of the sample gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Activated Carbon Filtration for the Air Filtration Industry

    General Carbon carries a complete line of activated carbon made from coal, coconut shell and wood for most vapor phase and air applications. These include impregnated carbons for specialty applications and high capacity non-impregnated carbon for H2S control. In addition, our specialty medias are ideal for the treatment of many contaminants that activated carbon may struggle with. Orders of bulk activated carbon are also acceptable as we have been a major supplier of activated carbon since 1958.

    By General Carbon Corp. based in Paterson, NEW JERSEY (USA).

  • Premium

    Gas analysis & monitoring system for gas generation

    The gas generators for calibration based on the use of “Method of Permeation Tubes.”. The permeation tubes are sealed capsules containing a small amount of the component that is in contact with a permeable membrane stable. The permeation through the membrane produces a vapor of the compound of the component of small quantity, very stable as a stream in time. This permeate stream by mixing with a dilution gas controlled and precise (for example nitrogen) creates a mixture in track at the desired concentration. The flow of the permeate is measured metrically through severe weight loss of the tube thus ensuring a standard high precision.

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Aluminium coverage for petroleum

    CST Covers domes help operators achieve regulatory compliance and bring new levels of cost efficiency to storage facility operations. By helping control hazardous vapor emissions and preventing water intrusion, our domes provide environmental and stored product protection and reduce lifetime maintenance and operating costs. The unique CST Covers dome can also be designed to withstand pressure required in certain difficult applications.

    By CST Industries Inc based in Gardena, CALIFORNIA (USA).

  • Activated carbons for air and gas industry

    Carbon Activated Corp. supplies carbon and related services to various vapor phase applications such as odor control in municipal waste-water facilities, landfills and refineries, SVE (soil vapor extraction) projects and many other vapor related applications. We manufacture specialized carbon both impregnated and non-impregnated for applications such as H2S removal and the removal of any time of noxious gases.

    By Carbon Activated Corporation based in Compton, CALIFORNIA (USA).

  • Gas detection analyzers for processing ovens & dryers

    Many industries are involved in coating products with solvent-borne materials and then employing ovens or dryers to remove the solvents from the finished product. The key hazard is an explosion from the build up of solvent vapors in the oven or dryer atmosphere. This buildup could occur by a malfunction in the production process such as: a sudden or improper amount of coating, a change in ventilation controls or excessive speed. In any of these cases, the concentration of flammable vapor has an opportunity to rise above safe levels, creating a potentially explosive mixture of vapor in air.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Flaring Solutions for Ethanol Loadout

    ABUTEC’s proprietary technology was designed to provide cost competitive solutions and the industry’s lowest operating costs and cost of ownership. Our uniquely engineered burner system offers a 33% reduction in make-up fuel over premixed surface combustion systems or traditional nozzle burners. In addition, we meet state and federal requirements for 40 CFR 60.18 and local BACT (Best Available Control Technology) and MACT (Maximum Achievable Control Technology). Whether you are looking for vapor combustors, enclosed flares, ethanol loadout flares, truck loadout flares, loading terminal flares, emergency flares, or marketing terminal flares, contact us for reliable, safe solutions.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you