Only show results available in Virginia? Ok

voc control Applications

  • VOC control for the carbon industry

    By Nacah Tech LLC based in Pittsburgh, PENNSYLVANIA (USA).

  • Stack Testing for VOC Recovery Afterburner Installation

    HAZARDOUS WASTE HANDLING INDUSTRY: Conducted on-site GC speciation of VOC constituents by Method 18 collecting samples continuously around-the-clock in large vacuum canisters in order to demonstrate compliance control of a VOC recovery/afterburner installation

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Mold Control

    Controlling mold spores and bio-contaminants is a challenge for indoor gardeners that requires attention to detail and specialized equipment. An average cubic foot of air has around 100,000 mold spores. When sufficient moisture is available, mold grows. AgriAir Purifiers control and eliminate Aspergillus and many other types of spores, mildew, odors, and VOC as well as sanitize the air and hard surfaces from biological contaminants generated by organic decay during the entire growing process. AgriAir Purifiers generate ionized-hydro-peroxides, which result in a proactive method of indoor air sanitation and promote organic garden production. This purification method eliminates the need for the use of additional chemicals or biocides that generally contain toxic compounds. AgriAir products can safely be used in occupied spaces throughout the entire grow cycle all while effectively destroying mold spores and other harmful bio-contaminants.

    By AgriAir Equipment based in Mukilteo, WASHINGTON (USA).

  • Premium

    Odor Control for Composite

    A Single Solution To Manage Composite Odors

    Many resins used in the composite industry emit styrene vapors which are considered hazardous in high concentrations and whose odor is an unpleasant nuisance. This gas is categorized as a volatile organic compound (VOC) and listed by the United States Environmental Protection Agency (US EPA) as a Hazardous Air Pollutant (HAP). Styrene is considered highly reactive in the atmosphere and may contribute to smog formation and the production of secondary air pollutants.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Air pollution control for the coating industry

    Whether you are flow coating miniblinds, magnetic tape, aluminum cans, coils, wire or paper, Anguil`s 35 years of pollution control experience has provided unique insight into the wide variety of applications in the coating industry. Anguil`s experience leads directly to savings for our customers. Determining your solution begins by quantifying the problem with a thorough assessment of your emissions. Utilizing proven principles of design engineering, your system will evolve to incorporate air volume reduction strategies to reduce system size, meaning a reduction in both capital and operating costs. This can be achieved by recirculating the air in drying ovens or by cascading areas of lower VOC concentration to areas of higher VOC concentration.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Odour & emission control for muncipal landfills

    Mechanical barriers that seal in odors, volatile organic compounds (VOCs), volatile nitrogen compounds (such as ammonia), volatile sulfur compounds (such as H2S) and, of course, fugitive dusts in municipal landfills.

    By Rusmar Inc. based in West Chester, PENNSYLVANIA (USA).

  • Premium

    Air pollution control for the pharmaceutical industry

    From pill coating and mixing operations to Ethylene Oxide (ETO) sterilization, Anguil has had great success solving a wide range of emission control applications in the pharmaceutical industry. As companies struggle to comply with the EPA`s MACT (Maximum Achievable Control Technology) standards or international regulations, it is comforting to know that Anguil thoroughly understands your process. Over three decades of experience treating halogenated, VOC and HAP process streams enable us to efficiently solve your pollution control problems.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and developing at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon monoxide (CO), nitrogen oxides (NOx), particulate matter (PM) and hazardous air pollutants (HAPs), all regulated by environmental agencies.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Air pollution control for the expanded polystyrene industry

    Removal of pentane and other VOCs from the molding and extruding process – commonly use regenerative thermal oxidizers (RTO) for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Gas detection analyzers for pollution control

    Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another way.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    Low concentrations monitoring of benzene and aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    With over 15 years of experience in the measurement of volatile organic compounds (VOC), Environment SA announces the VOC72M, a new generation analyzer for the measurement of BTEX compounds by gas chromatography with photo-ionization detector (PID). The VOC72M can handle up to 40 compounds and eight configurations for analysis. This compact and fully automated analyzer with wide voltage range specifications (90-240V) provides equivalent performance to the laboratory chromatographs and is particularly suited to fixe or mobile ambient air quality monitoring laboratories. The VOC72M is fitted with a PID detector new generation, much more sensitive, more stable and whose lamp does not need to be cleaned; the analyzer integrates flow control fittings a 3 levels security system built on and uses only one gas (nitrogen). This robust and low maintenance instrument performs all the functions (sampling, analysis and data management) in a simple and completely autonomous mode. It is a particular

    By Environnement S.A based in Poissy, FRANCE.

  • Premium

    Chemical and Pharmaceutical Solutions

    The application of VOC emission control equipment for the chemical and pharmaceutical industries requires a thorough knowledge and understanding of the customer's process and requirements, and having the ability to offer custom solutions. MEGTEC has years of experience in finding solutions to support the chemical industries worldwide. with our range of solutions including scrubbers and wet electrostatic precipitators, carbon adsorption systems for solvent recovery, distillation and purification equipment, and thermal oxidation systems.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Wood Products

    MEGTEC is a leader in providing regenerative thermal oxidizers (RTO) for VOC control for products such as OSB, MDF, SYP, plywood, particleboard, wood pelletizing and other engineered wood products, with particular expertise in solving the problems of media plugging and alkali attack associated with wood dryer exhaust. With thousands of systems installed worldwide in many process industries, MEGTEC has the knowledge to provide you with the best solution for your specific needs. MEGTECā€™s designs are modular and cleanable, using alkali-resistant ceramics and corrosion-resistant materials of construction.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Ethanol and Biofuels

    Controlling the VOCs and CO emissions produced in the feed dryers (wet and dry milling), coupled with the particulate matter being introduced and the need for the reduction of NOx are just the start of having a successful abatement solution. The challenges of smooth pressure control that reduces dryer fluctuations and plug resistant media that lessen the frequency of bake-outs are also part of a successful abatement system and we have the solutions. Our engineered oxidation systems provide reliable performance with minimal maintenance requirements. Externally accessible valve bearings and other critical components are kept out of the corrosive moisture-laden streams extending the life of the equipment and facilitate maintenance intervals. Our simple oxidizer designs control your emissions with minimal facility intervention and allow us to provide you with reliable and dependable equipment.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Gas monitoring instruments and systems for fumigation

    Sea cargo containers and wooden packing materials are fumigated to control the spreading of pest animals and micro-organisms. Fumigant gases are toxic and measurements are carried out as a health and safety precaution. Measurements are required by e.g. customs inspectors prior to opening containers, making the shipping companies responsible for carrying out measurements. Products shipped in containers may release VOCs from e.g. solvents and glues used in manufacturing process. The concentrations of vapors may be significant in the confined space of the container. While most containers originate in China and Southeast Asia, cargo container measurements are done in ports across the world, as the same gases are encountered in all ports.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Air cleaning system for the airports sector

    Dynamic Air Cleaners remove dangerous airborne particles that other air cleaning systems miss…including odors, VOCs, smoke, bacteria, allergens, fine dust, molds and pollen…without producing any harmful ozone. Dynamic Air Cleaners can have a significant impact on removing odors from outside air as the air comes through the ventilation system. This feature is very important in airports in the control of jet exhaust fumes that migrate into fresh air intakes.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • Premium


    Omnitec Design manufactures negative air machines, scrubbers, moisture extractors, heaters, pressure monitors, and water filtration equipment used by abatement and restoration contractors, health care facilities, in industrial and commercial applications and a wide range of environmental cleanup projects. Our equipment combines the best technologies available for HEPA air filtration, control of VOCs, odor and biological contaminants and heaters for structural drying and sanitizing. Our mission is to provide high quality and reliable filtration equipment. Our equipment is used for Abatement, Remediation, Construction and renovations, labs and healthcare facilities, and more. When you purchase our equipment you will receive not only a quality product, built in the USA, but also our customer service which is the best in the industry. By purchasing our filtration, dust collecting, and purifying equipment, to will receive from Omnitec our complete support. Breathe easy.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you