Only show results in Virginia? Ok

waste collection industry Applications

  • Biomass collection for the municipal solid waste industry

    Vermeer is helping municipalities take advantage of the new and emerging opportunities in biomass collection. Biomass is defined as any organic material made from plants or animals and includes items such as urban wood waste, forestry residues, perennial grass crops, agricultural residues and municipal solid wastes.

    By Vermeer based in Pella, IOWA (USA).

  • Solid Waste Collection

    We provide equipment for municipal solid waste collection. Including but not limited to commercial front loaders, automated side loaders, rear loaders, recycling trucks, grapple trucks, Dump Loc body supports, and X1R lubricators for the solid waste industry, recycling and bulky waste collection.

    By JLM Equipment based in Lake Wales, FLORIDA (USA).

  • Premium

    Waste sorting solutions for the packaging industry

    Packaging waste is mostly made up of different polymers, beverage cartons, paper and glass. Depending on the country in question, different collection systems apply and the material will invariably arrive in different conditions to the MRF’s (Materials Recovery Facility).

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Shredding solutions for hospital waste industry

    This category includes various products and materials collected in hospitals: hazardous waste (eg catheters, disposable gloves, test tubes, disposable gowns, material for dressing, etc.). lab hazardous waste as a result of the carrying out of research activities and bacteriological diagnostics (for example: land plates, contaminated culture, etc.). cutting waste (for example: needles, syringes, scalpels, etc.). unrecognizable organs and body parts empty containers (for example: of medicines, of disinfectants, of vaccines, food, beverage and infusion solutions) expired or unusable medicines, other cytotoxic and cytostatic chemical waste substances.

    By SatrindTech Srl based in Arluno, ITALY.

  • Enterprise resources planning for the waste & recycling industry

    THE CHALLENGE: NOT ONLY DISPOSAL, BUT ALSO PROCESSING. The waste management and recycling industry consists of companies acting as waste collection and landfill operators, processers (sorters, waste treatment specialists, shredders and recyclers) or traders in secondary raw materials.

    By FWI Information Technology GmbH based in Steyr-Gleink, AUSTRIA.

  • Combustible Aluminium, Titanium and Magnesium Dust Collection

    The consequences of an industrial dust explosion or fire are unthinkable - worker injury, loss of life, property damage, business interruption, and irreversible environmental harm. Few companies realize how many diverse and common industrial applications produce combustible particulates, or where in their facilities this catastrophic threat is settling. What is a combustible dust? “A combustible particulate solid that presents a fire or deflagration hazard when suspended in air or other oxidizing medium over a range of concentrations, regardless of particle size or shape” – NFPA 654? High Risk Applications Metalwork (aluminum, magnesium, or titanium and others) – cutting, grinding, or finishing Ceramics – raw product handling and enamel spray Chemicals – material handling, crushing, grinding, roasters, kilns, and coolers Coal mining – material handling, de-dusting, drying, air cleaning Food (flour, sugar, and others) – mixing, grinding, blending, bagging, and packaging Foundry – sand handling, tumbling mills, abrasive cleaning, and shakeout Pharmaceutical – mixing, grinding, blending, bagging, and packaging Rubber – mixing, grinding, talc dusting, de-dusting, and batch-out rolls Woodwork – woodworking machines, sanding, waste conveying?

    By Diversitech based in Montreal, QUEBEC (CANADA).

  • Premium

    Industrial Shredder For Municipal Waste Disposal

    With the growth of population and rapid development of the city, more and more municipal waste are produced and seriously influence our live and environment. Municipal waste also know as MSW, domestic waste and household refuse. Municipal waste should be shredded before burying or burning to save more storage space or to lower the transport cost for collecting. Harden has offered hundreds of excellent municipal waste shredding solutions for both individual or association project. Harden shreds any waste for a cleaner city and environment, please feel free to contact us for your customized shredding solution. Municipal Waste Disposal Methods Burying of municipal solid waste Incineration of municipal solid waste Pyrolysis and gasification of municipal solid waste Sorting and recycling of municipal solid waste Cooperative disposal of cement kiln Municipal Waste Shredding Technology Pre-shredding procedure Sorting and RDF disposal system

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • Fiberglass Reinforced Plastic (FRP) Equipment for Waste Water Treatment Industry

    Since 1986, Zhongyi has designed and manufactured a variety of FRP equipment for waste water treatment industry, such as: Shop fabricated(vertical and horizontal) tanks for storage, mixing and collecting. On site fabricated tanks. Piping, tees, elbows, flanges, reducers. Stacks, scrubbers, strippers. Hoods, covers, supports.

    By Zhongyi GRP Industrial based in Jizhou, CHINA.

  • Stack Testing for VOC Recovery Afterburner Installation

    HAZARDOUS WASTE HANDLING INDUSTRY: Conducted on-site GC speciation of VOC constituents by Method 18 collecting samples continuously around-the-clock in large vacuum canisters in order to demonstrate compliance control of a VOC recovery/afterburner installation

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Premium

    Shredding solutions for food industry

    This category includes both the wet fraction of MSW (generally collected in the appropriate compostable bags) and all that waste generated by the food industry. If treated properly, this waste can be reintroduced in the production cycle. SatrindTech proposes two-shaft shredders or bag opener for preparing the material for the subsequent steps of separation and composting cycle. If the industrial applications may require a controlled size of the output, the choice has to be fall onto single-, three- and four-shaft shredders These last models, provided with a sorting screen, guarantee the preparation of the material for the subsequent steps of the industrial process.

    By SatrindTech Srl based in Arluno, ITALY.

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Oil skimmers for steel industry

    AMBAR has supplied oil skimmers to the steel industry for over 25 years. The most common application for the Oil Mop skimmer is the removal of oil and grease form scale pits. Other applications include cooling ponds, retention ponds, in-ground sumps and waste water treatment pits. The advantage that AMBAR Environmental`s Oil Mop skimmers have over its competition is its versatility in a wide variety of applications. With the use of Tail Pulleys or Rollers, Rope Mop can be routed to provide excellent coverage of a pit, pond or tank. The mop can always be routed to the area where the oil collects the most.

    By Ambar Oil Skimmers based in Westwego, LOUISIANA (USA).

  • Premium

    Harden Shredding Technology for Metal-processing Industry

    Harden Shredding Technology for Metal-processing IndustryMetal waste may be comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! The processing of scrap metal is strongly related to steelworks and, therefore, it becomes fundamental to deliver uniform material with a high specific weight. Harden scrap metal shredders are perfect parallel to shearing machines for volume reduction, hence qualifying the material as shovelable, but are also applicable upstream of the hammer mills, facilitating the work in terms of safety, wear and electricity consumption. The main fields of application are: • Light waste collection • Collection in packages • Unmodified or packaged automobiles (including with engine) • Rolling mill trimmings • Sheet metal • Oversized metal items (cabinets, etc.)

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • Waste water respirometry solutions for toxicity based consents

    Water companies, water authorities or publicly-owned treatment works (POTW) need to have some knowledge of the composition of the wastes they it receive. In addition to testing for ammonia and BOD or COD levels, treatment works can license industrial discharges on the basis of concentrations of some of the known toxic compounds. However, it is recognised that very many non-regulated toxic materials still enter the treatment works and reduce the efficiency of biodegradation, and may cause toxic shock. The way is now open for more widespread use of direct toxicity tests as a basis for toxicity-based consents. Samples of the industrial effluent are collected at source, for testing on the actual bacteria of the receiving activated sludge. The tests used are the Respiration Inhibition Test and the Nitrification Inhibition Test. Note that this approach mirrors that of the regulators of discharges to receiving waters, who are now using direct toxicity tests (DTA) or whole effluent toxicity tests (WET tests) in order to protect the receiving environment.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Applications and Air Pollutants Removed in the Pulp and Paper Industry

    Equipment and systems for Kraft and Sulfite mills. Control chlorine and chlorine dioxide emissions from bleaching operations. Brown stock washer emissions. Control particulate emissions from lime kilns, lime slakers, black liquor recovery boilers, furnaces and gasification units. Particulate from bark and sludge boilers and sulfur dioxide and trioxide removal from those sources. Control of hydrogen sulfide, TRS and methanol emissions from LVHC and HVLC gas streams. Complete fugitive lime dust collection systems to handle emissions from conveyors, elevators and feeders. Smelt dissolving tank particulate and TRS gases. Direct contact waste heat recovery. Black liquor evaporation. Treatment and subcooling of boiler and kiln gases to remove particulate, sulfur dioxide and TRS for precipitated calcium carbonate production (PCC). Dust from tissue and paper rollers and dryers. NASH and sodium hypochlorite scrubbing. Waste heat recovery with direct contact heat exchangers.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Grease removing in wastewater pipes

    Whether a collection system is handling domestic, commercial, or industrial waste; grease accumulation causes problems in wet wells, lift stations and pipelines. Problems with grease include interference with wet well level controls, reduced wet well capacity, plugging of pipes and pumps, and unsafe working conditions.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Biomass Furnace Dust Filtration

    Application: PPS (Ryton) Filter Bags are widely used in coal-fired boilers, waste incinerators, coking furnaces, kiln furnaces,Biomass Furnace ,chemical dry process of flue gas cleaning processes, also using, carbon black, powder collection, pneumatic conveying, cement industry, and more. When due to chemical attack and hydrolysis causes, Aramid cannot be used, PPS (Ryton) Filter Bag can be substituted.

    By Zhejiang Grace Envirotech Co., Ltd based in XIAOSHAN, CHINA.

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Nuclear Decon

    Pentek is the industry leader in manufacturing, engineering and designing specialty surface decontamination technologies and processes for nuclear applications. Our technology offers a safe and environmentally friendly methodology that removes, collects and packages the waste in a single-step manner. Since 1981, our products have been used for critical work scopes in the nuclear weapons complex, commercial nuclear utility industry, and various DOD sites where strict controls are a prerequisite. The Pentek system offers a proven, dust-free process with built-in engineering controls that protect both the worker and the surrounding environment during the surface cleaning process.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you