Only show results available in Virginia? Ok

waste drying Applications

  • Premium

    Products for dry densimetric separation

    Dry separation Products for cleaning products having uniform size and different specific weight (ex. metal/plastic, plastic/wood, rice/gravel, etc.).

    By Guidetti Recycling Systems based in Renazzo (FE), ITALY.

  • Automotive Shredder Residue Drying

    Getting economic value from landfill waste like automotive shredder residue (ASR) is a big challenge that can have a big payoff. Vulcan® Systems Drying Technology is the key component of material preparation when separating ASR waste to reclaim energy and metals. Vulcan® ASR Dryer Systems are manufactured to suit each client’s individual project needs and custom-designed specifically to dry ASR, making the material easy to transport, separate, and handle. This drying system consists of a drum with a burner that is mounted to a combustion chamber. Shredder residue is fed into the rotary dryer. After passing through the system, the dried material is discharged to a transfer conveyor for further sorting and separation. The vapor from the process is pulled through a cyclone that is specifically designed to deal with the fine ASR dust, as well as a high-temperature baghouse that removes additional fine particulates from the vapor stream.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Premium

    Shredding solutions for pallets, dry wood in general and green wood industry

    The treatment of this material is mainly for a reuse of this material for energy purpose: with wood shredding we refer to pallet and dry wood shredding while with green wood we consider the crashing of the gardening or agricultural waste. Depending on the desired final size, with dry wood different types of shredders can be used: a crusher or a shredder with T-blades can be used for a mere volume reduction of the material or single-, three- and four- shaft shredders if the purpose is getting a size controlled. The green wood is usually processed using a crusher or a two-shaft shredder because the purpose is the reduction in volume of the material.

    By SatrindTech Srl based in Arluno, ITALY.

  • Premium

    Waste sorting solutions for the single stream recycling

    Single stream recycling, otherwise known as dry commingled waste, comprises primarily of paper and cardboard, plastic packaging waste, textiles, cans and, in some cases, glass. The demand for these secondary resources continues to rise compared with that of primary resources.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Energy and Fuels from Municipal Solid Waste (MSW)

    Municipal Solid Waste (MSW), which includes household waste, is the residual waste put into a black bin bag or wheelie bin. MSW contains a mixture of recyclable, organic, inorganic and biodegradable materials. We recover as many recyclable materials as possible before drying and shredding the remainder to make a Refuse Derived Fuel (RDF) for the process. Our energy from waste process, Gasplasma®, transforms the RDF into a clean hydrogen-rich synthesis gas (syngas).

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Premium

    Industrial air pollution control for the recycling and waste management

    Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

  • Laboratory equipments for fluorine in industrial & construction waste

    Measuring Fluorine in Industrial and Construction Waste using Benchtop NMR MQC Analyser. Processing and recycling of industrial and construction waste often requires measuremetns of fluorine content in the materials. It mostly relates to monitoring potential emission of toxic fluorine gas and optimisation of the waste processing. Our benchtop NMR analyser MQC systems provide a fast, simple and accurate method of measuring fluorine in liquid and dry waste. The NMR technique does not require the use of any chemicals and complicated sample preparation.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Waste Sorting - CRT Glass Sorting

    End of life TV sets and computer monitors require to be recycled to maximise the level of material recovery, and to meet the requirements of the EU WEEE Directive. CRT glass is the largest item by weight. However, because of the 2 different types of glass used in CRT manufacture, the glass fractions have to be sorted to achieve a separation of the 2 type of glass, i.e. panel glass sorted from funnel glass. X-TRACT separator is able to sort the panel glass from the funnel glass. It does it by comparing their different atomic densities, and analysing the data from the X-Rays using a bi-chromatic sensor system. X-TRACT is the first industrial application for any dry mechanical density sorting.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Waste Treatment for Sludge

    Town development provokes an increase in the number of used-water treatment sites. In turn, these factories generate silt which must be treated. Therefore, MENART develops and equips silt treatment purification stations with: Corridor turners for silt drying. Sludges mixers with green waste coupled to a sieve. Green waste shredders. Jigger-mixers. Once treated, these sludges can be spread to enhance farming.

    By Menart based in Dour, BELGIUM.

  • Premium

    Products for electric cables and radiators recycling

    Compact machines and lines for the recovery of copper and aluminum by milling and dry separation of the metal from the insulating part, from aluminum or copper (ex. radiators).

    By Guidetti Recycling Systems based in Renazzo (FE), ITALY.

  • Premium

    Optical Sorting Machines for single stream

    Irrespective of the used collection system and the corresponding task, we design systems that grant 100% efficiency. Various countries have different waste collection systems, resulting in different tasks for the sorting technology. For example, packaging waste mainly consists of plastics, paper and glass. Single-stream waste mainly consists of dry, mixed waste (paper, cardboard, films, plastics, metals, aluminium, and in many cases also glass). Heavy, mixed waste often also contains bulky materials etc. The integration of REDWAVE sorting machines into a waste treatment plant grants maximum purity of the sorted fractions.

    By REDWAVE a division of BT-Wolfgang Binder GmbH based in Gleisdorf, AUSTRIA.

  • Premium

    Shredding solutions for refuse derived fuel (RDF) industry

    It’s the so-called Residue Derived Fuel, obtained by treating the dry fraction of the MSW that, after having carefully removed glass, metals and inert, has suitable characteristics to be used as an alternative fuel. The mix of materials are paper (less than 50%), plastic (less than 25%), textiles (less than 15%), organic (less than 15%), wood and other (less than 5%). It is mainly used in cement and steel production plants and energy production plants. SatrindTech proposes two-shaft shredders as primary machines for volume reduction and single shaft shredders, three- and four- shaft shredders for obtaining of a controlled size.

    By SatrindTech Srl based in Arluno, ITALY.

  • Food Waste Recycling, Reduction or Disposal Systems for Marine Vessels

    Applications include: •Luxury Yachts: With space a premium on most luxury yachts having a system on board that that can reduce the volume and weight of the wastes is key – we have a growing number of Gobi drying systems being specified as the alternative to cold storage of food wastes •Exploration Vessels: Being at sea for lengthy periods of time and in certain areas no longer being allowed to dispose of food wastes directly to sea, means that the food wastes have to be stored on ship. Traditionally the wastes are either frozen – but this takes up valuable space in the fresh food freezer, or stored in bins on ship, but in hot temperatures these wastes expand give off gas and become a hazard, using the Gobi dryer and producing a sterile inert material 80% less in weight and volume that will no longer putresce is a perfect solution.

    By Tidy Planet Limited based in Macclesfield, UNITED KINGDOM.

  • Premium

    Heat Transfer Equipment for Waste Water Treatment Industry

    For years we are working successfully for environmental protection. Our systems allow to conserve resources through treatment and recovery. For the treatment of wastewater, among other thin film dryers. You can concentrate pastes and sludges, thicken, dry and dehydrate. The good product turnover in the dryer can dry sludge excellent. Process water must often be treated to either be disposed of properly or again recirculate in the process circuit. These combinations of methods are often necessary. In the process of purification solution GIG Karasek thermal processes are the focus. Thin Film Dryer here are the key component.

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA.

  • Premium

    Coating and Laminating

    MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Solid/liquid separation for environment industry

    Four dewatering, three thickening, four drying, and multiple screening technologies for industrial and municipal wastewater, biomass and organic waste. Process expertise for sustainable solutions. Challenging municipal budgets. Water shortages. A need for renewable energy. Today, there’s simply no room for waste. Getting the most efficient separation is essential, not just to profitability, but also to ensuring sustainable growth.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.

  • Odor control for the tobacco industry

    Tobacco produces a strong, characteristic smell. The process airflow from the tobacco industry mainly comes from drying the tobacco leaves. Through central air exhaust systems, all air submitted from the drying process is blown outside. Because this is a very large waste airflow, odour nuisance in the neighbourhood is likely.

    By Aerox B.V. based in Vleuten, NETHERLANDS.

  • Treatment and dewatering of rejects for pulp and paper industry

    Dewatering rejects to maximum dry contents represents an essential process step both from an economical and ecological viewpoint, especially in waste paper based paper mills but also in pulp mills. The following goals shall be achieved: high heating value for stable and ecological incineration without co-firing, reduction of landfill and transport charges.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Biomass Furnace Dust Filtration

    Application: PPS (Ryton) Filter Bags are widely used in coal-fired boilers, waste incinerators, coking furnaces, kiln furnaces,Biomass Furnace ,chemical dry process of flue gas cleaning processes, also using, carbon black, powder collection, pneumatic conveying, cement industry, and more. When due to chemical attack and hydrolysis causes, Aramid cannot be used, PPS (Ryton) Filter Bag can be substituted.

    By Zhejiang Grace Envirotech Co., Ltd based in XIAOSHAN, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you