waste electronic Applications in USA

  • Premium

    Waste Sorting - CRT Glass Sorting

    End of life TV sets and computer monitors require to be recycled to maximise the level of material recovery, and to meet the requirements of the EU WEEE Directive. CRT glass is the largest item by weight. However, because of the 2 different types of glass used in CRT manufacture, the glass fractions have to be sorted to achieve a separation of the 2 type of glass, i.e. panel glass sorted from funnel glass. X-TRACT separator is able to sort the panel glass from the funnel glass. It does it by comparing their...

    By TOMRA Sorting GmbH. Office in Shelton, CONNECTICUT (USA).

  • Premium

    Recycling equipments for electronic waste recycling (WEEE)

    The content of WEEE (electrical and electronic waste) gives recyclers various initiatives for recycling. It contains hazardous substances, such as lead, mercury or certain flame retardants, as well as precious metals like gold and silver. In 2012 approx. 64,900.000 ton electronic goods where produced and 49.000.000 ton electrical and electronic waste (WEEE) was generated. As the amount of sold electronic goods rise, the amount of WEEE rises. It is vital that this waste is taken care of properly.

    By Eldan Recycling A/S Office in Sanborn, N.Y., NEW YORK (USA).

  • Electronic scrap processing & shredding

    SSI manufactures shredders and automated systems to efficiently process all varieties of electronic scrap for recycling, reclamation and recovery. With many successful customers operating around the world, SSI has found the best electronics scrap processing system design philosophy is to employ machinery to separate commodities at the first point they become marketable, at the highest capacity possible, and refine high value materials after initial separation.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Industrial air pollution control for the electronics and electrical industry

    The world`s appetite for electronic devices - from simple household appliances to sophisticated computers - has led to rapid growth of both these industries. Typically for the electronics industry, there are large waste gas streams (up to 400,000 Nm³/h) with relatively low concentrations of different solvents. The waste gases mainly occur in coating, cleaning and etching processes during the production of semiconductors, CDs/DVDs, Blue-ray discs,...

  • Premium

    Intelligent compliance solutions for electronics and medical devices

    Few industries face the mounting challenges and scrutiny of expanding environmental compliance requirements, ecological mandates, consumer expectations and NGO watch groups as much as electronics and medical device manufacturers. Even before the Sony PlayStation cadmium crisis, the entire supply chain has been inundated by an ever-expanding myriad of legislation, ranging from the EU Directives on waste electrical and electronic equipment (WEEE), the restriction of hazardous substances (

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    EDXRF spectrometers for electronics (RoHS / WEEE) industry

    Compliance with the RoHS and WEEE directives

    The Energy Dispersive X-ray Fluorescence (ED-XRF) spectrometers offer efficient solutions for the analytical requirements of the determination of regulated substances in electrical and electronic equipment according to the European Directive RoHS (Restriction of Hazardous Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical and Electronic Equipment).

    By Xenemetrix Ltd. Distributor in Austin, TEXAS (USA).

  • Premium

    Optical sorting machines for electronic scrap (WEEE) industry

    Recovery of recyclables from Waste Electrical and Electronic Equipment (WEEE): Metals and alloys. Plastics (thermoplastics, plexiglass, etc.). Composite materials (circuit boards, etc.). Brominated plastics (BFR). Plastics with cadmium compounds. Material tainted with precious or recoverable metals (e.g. copper, brass, silver, etc.). Sorting of monitor glass (CRT), etc.

    By REDWAVE a division of BT-Wolfgang Binder GmbH Office in Alpharetta, GEORGIA (US) (USA).

  • Oxygen Generating Systems for Waste Gas Treatment in the Semiconductor, PV and LED Industries

    Waste gas treatment is an often overlooked but important function of Semiconductor, PV and LED fabrication. Several serious accidents have taken place in factories where no abatement was installed. Even today waste treatment is often seen as a cost rather than a safety issue. There are three main reasons why waste gas treatment is installed in factories: health and safety, environmental factors, and quality control.

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Water quality monitoring for semiconductor industry

    Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. Good quality waste streams for the manufacturing process can also be monitored for reuse potential.

    By Real Tech Inc. Distributor in WASHINGTON (USA).

  • Premium

    Determination of mercury in mercury-containing wastes

    INTRODUCTION

    Mercury is widely used in chemical industry, electronic s, electric engineering, instrument making, medicine, pesticide and explosives production, etc. A number of techniques and equipment are developed for reclaiming mercury-containing waste, such as soil, sludge, stillage botto ms, slime sediments, fluorescent lamps, mercury-containing batteries.

    By Lumex Instruments Group Distributor in NEW JERSEY (USA).

  • Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

    Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Very large waste gas volumes with low contaminant concentration

    Example: Electronics industry. Similar tasks: Paint shops, spectacle coating, coating on the inside of cans.

  • Premium

    E-scrap Recycling Equipment for Recycling Industry

    Electronic scrap (also named e-scrap) mainly includes discarded household appliance like refrigerator, TV, computer, washing machine, printer, fax machine, cellphone, circuit board, hard discs, CD ect. With the development of electronic industry and information technology, and electronic products’ fast replacement, the problem of e-scrap has become one of the stringent problems which need to be resolved effectively and correctly. Every year the 20 – 50 million metric tons of...

    By Harden Shredder Machinery Ltd. Distributor in PENNSYLVANIA (USA).

  • Premium

    Thermal waste gas purification of siliceous organic compounds

    Example: Electrical industry. Similar tasks: Electronic industry, Coating, Waste management.

  • Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding...

    By Eriez Magnetics Europe Ltd Office in Erie, PENNSYLVANIA (USA).

  • Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd Office in Erie, PENNSYLVANIA (USA).

  • Premium

    Recycling sorting solutions for the non-ferrous metals - post shredder

    The widespread use of electronic products has created an enormous demand for the sorting of non-ferrous metals such as copper and aluminum. To be usable, these non-ferrous metal fractions must be treated to a high degree of purity. Thanks to TOMRA’s efficient sorting technology, separating these materials from metal waste makes is worthwhile in every aspect.

    By TOMRA Sorting GmbH. Office in Shelton, CONNECTICUT (USA).

  • Premium

    Scrap Metal Recycling

    Recognized as an industry leader in shredder recycling, we operate 50 recycling facilities for metal, green waste, plastic, food waste, rubber, tires, RDF waste. Harden’s facilities are designed with safety and efficiency in mind for both employees and customers. Our equipment is maintained and updated regularly and our scales are calibrated quarterly. The properties of metals provide unique benefits and advantages for their recycling. Unlike other recycled materials, such as paper and plastic, metals can be...

    By Harden Shredder Machinery Ltd. Distributor in PENNSYLVANIA (USA).

  • Premium

    Harden Shredding Technology for Metal-processing Industry

    Harden Shredding Technology for Metal-processing IndustryMetal waste may be comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! The processing of scrap metal is strongly related to steelworks and, therefore, it becomes fundamental to deliver uniform material with a high specific weight. Harden scrap metal shredders are perfect parallel to shearing...

    By Harden Shredder Machinery Ltd. Distributor in PENNSYLVANIA (USA).

  • Reliable Shredding Technology for Metal-processing Industry

    Regardless of whether your metal waste comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! Metals are important raw materials for the industry and can be repeatedly returned to the recovered resource cycle with very little loss. The recycling of metals saves valuable raw materials and energy as opposed to the new processing of ores.  Our...

    By UNTHA Shredding Technology Gmbh Office in Hampton, NEW HAMPSHIRE (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you