Only show results available in Virginia? Ok

waste generation Applications

  • Hazardous and Special Wastes

    Gasplasma® uses a DC Plasma Converter to crack impurities from the raw syngas. The intense heat and strong UV light produced by the Plasma Arc neutralises hazardous wastes, such as sludge and oils, creosote and other preservatives and chemicals. Gasplasma® transforms the organic parts of the waste into a hydrogen-rich syngas that is used to generate clean, renewable power and renewable heat. The second stage Plasma Converter makes hazardous elements inert and all the inorganic materials are vitrified into an environmentally benign product called Plasmarok®.

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Oxygen Generating Systems for Waste Gas Treatment in the Semiconductor, PV and LED Industries

    Waste gas treatment is an often overlooked but important function of Semiconductor, PV and LED fabrication. Several serious accidents have taken place in factories where no abatement was installed. Even today waste treatment is often seen as a cost rather than a safety issue. There are three main reasons why waste gas treatment is installed in factories: health and safety, environmental factors, and quality control.

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Premium

    Odors control for solid waste

    A solid solution for solid waste odors. All areas of solid waste handling are, by nature, odorous affairs. Municipal sludge, municipal solid waste, landfills, composting and co-composting facilities all generate odors that can be offensive to workers and the community at large. The process is a complex one, with multiple drops, collections, transfers and sortings of recyclable and non-recyclable material. Combustible materials are then incinerated for energy production.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Reliable Shredding Technology for Organic Waste

    Our shredders process biological and biogenic waste to generate an optimal substrate for further utilisation in your biogas plant or in your disposal business. The application area ranges from green or garden waste to food waste and expired goods including packaging to slaughterhouse waste. Non-homogeneous or organic waste in pieces including packaging must be shredded to prepare it optimally for fermentation. Our low-speed S-series shredders are ideally suited for this application. These two-shaft shredders ensure reliable processing and guarantee a pumpable fermentation substrate. Thanks to the special equipment, efficient cutting unit and sturdy machine construction, these shredders are very reliable and have a long service life!

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Waste Processing

    Our shredders are well suited for a 1-step or 2-step waste recycling. A mechanical-biological waste recycling is usually performed when processing household or commercial waste similar to household waste. The goal of this treatment is to generate a landfill-suited waste material by separating waste fractions with a high calorific value, valuable resources as well as foreign objects. We understand the tough requirements that the shredding technology of a mechanical-biological waste recycling system faces. With our newly engineered XR series we are able to offer the ideal product that meets these tough requirements for both low operating costs and high availability.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Waste processing and composting solutions for waste and recycling industry

    QM Environmental Services offers a range of products that can help to improve the processing and composting of organic waste forms or to solve odour problems associated with the transport, storage and processing of waste in general

    By QM Environmental Services Ltd. based in The Hague, NETHERLANDS.

  • Odor control solutions for solid waste industry

    Today in modern society we generate waste and and we generate it in vast quantities. Professionals around the world are dedicated to processing this material as efficiently as possible. Efficient processes and higher population density increase the risk of affecting the quality of life of workers, neighboring communities and the overall population.

    By Ecolo Odor Control Technologies based in Toronto, ONTARIO (CANADA).

  • Waste Management Solutions for Mining Wastes

    Mining waste typically arises from the limitation of the installed technologies of an operation, e.g. where fines cannot be tolerated. They are associated with mine workings and often contain valuable and/or hazardous materials. The hazardous content, which are often the valuable fractions within this waste are typically metals. Spread of metal toxicants in association with tailings particles, through a combination of wind dispersion or if washed into the soil or rivers, can have a highly damaging effect on the environment. Crucially, as time moves on, the mine tailing of one generation become the resource of the next.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Energy and Fuels from Commercial Waste

    Commercial Waste is similar to Municipal Solid Waste although it tends to have more biodegradable products. Commercial waste is defined as all wastes created by commercial businesses. This can include, but is not necessarily limited to, solid or liquid wastes originating from offices, stores, markets, restaurants, shopping centres and other enterprises. We receive Commercial waste into the Materials Recycling Facility (MRF) at the front end of the Gasplasma® energy from waste plant. Any recyclable materials are recovered and the remainder is dried and shredded to make Refuse Derived Fuel (RDF). The RDF is used as fuel in the Gasplasma® plant to generate clean, renewable power and heat.

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Waste management for military

    At sea or on land, compact removal of waste from military facilities is beyond a valuable and green activity, but a logistical imperative. Minimizing space, labour and equipment dedicated to waste management in both marine and land-based operations is of great value for military applications. In addition, security is a major concern for military ships. Minimizing the time the ships spend docked or in proximity to foreign ports significantly reduces the risks of enemy attack. Moreover, they generally carry more personnel than equivalent sized commercial vessels and spend longer periods at sea, intensifying waste management problems.

    By Terragon Environmental Technologies Inc. based in Montréal, QUEBEC (CANADA).

  • Bespoke Waste Solutions

    At Inciner8 we have many years experience of auditing and profiling waste streams. Over the last few years we have seen an increase in enquiries form the mining sector. The waste challenges cover 2 distinct areas. These are typical camp waste - which will be a mixture of domestics waste, plastics, paper, food wastes etc). The second area is a less clear – Most mining processes involve large by-products whether that be contaminated soils, contaminated water, consumables or other general plant waste from the day to day mining operations. We would work closely with your organisation to ensure the best solution is implemented for your particular waste needs.

    By Inciner8 Limited based in Southport, UNITED KINGDOM.

  • Oxygen generation for ozone industry

    Ozone is a highly effective method for bacteriological treatment and useful in a variety of everyday situations from removing odor to ensuring clean, high quality drinking water from the tap. But O3 is more than just effective. It is also environmentally safe, which makes it highly suitable for treating water in enormous quantities; both drinking water and industrial waste water, i.e. in industrial slaughterhouses.

    By Oxymat A/S based in Helsinge, DENMARK.

  • Premium

    Waste compaction for the retail industry

    Retail outlets and leisure facilities will undoubtedly generate large quantities of waste. Heavy footfall inevitably leads to waste management issues in order to ensure premises are kept clean, tidy and safe. HSM’s balers offer the ideal solution for any shop, retail outlet and leisure facility. HSM’s product range includes small footprint balers ideally suited to retail waste and a cost-effective and efficient alternative to skips and bins.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Premium

    Recycling equipments for electronic waste recycling (WEEE)

    The content of WEEE (electrical and electronic waste) gives recyclers various initiatives for recycling. It contains hazardous substances, such as lead, mercury or certain flame retardants, as well as precious metals like gold and silver. In 2012 approx. 64,900.000 ton electronic goods where produced and 49.000.000 ton electrical and electronic waste (WEEE) was generated. As the amount of sold electronic goods rise, the amount of WEEE rises. It is vital that this waste is taken care of properly.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Waste compaction for the pet & plastic bottles industry

    PET and other rigid plastics are usually made from either PET, high density polyethylene (HDPE), polypropylene (PP) or polystyrene (PS) – the hard, not expanded type. Recovered items such as bottles, pots and containers can all be baled sold on to recycling companies. If you’re unsure which type of plastic waste your business generates, we can help you identify it and recommend the best solution for your needs. HSM provides balers for use with plastics in many different scenarios from small volumes, with the aim of creating a tidy, efficient work area is the main aim through to demanding, high volume situations where a baler which can deal easily with throughputs of many bales per hour is required.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Premium

    Air pollution control for the waste gasification industry

    Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Oxygen Generating Systems for Sewage Treatment

    Using Oxygen to Solve Waste Water Problems Lack of oxygen can cause inadequate purification or even anaerobic decomposition, as well as offensive odors. Injecting oxygen into sludge beds &/or piping allows you to: * Reduce nitrogen levels * Meet peak O2 demands * Have a back up to your aeration system * Pre-purify waste water * Control odors * Deter corrosion damage * Meet increased requirements regarding waste water purification

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Wastewater treatment solution for the mining & power generation industries

    From the remote Canadian wilderness to the mountainous regions of South America, Schwing Bioset piston pumps are called upon for reliable service in some of the harshest environments on the planet to pump tailings to surface and sub-surface disposal. Schwing Bioset Fluidized Bed dryers and conditioners are trusted when reliability and performance are a must to process coal at your power generation facilities. Schwing Bioset piston pumps can be used to pump wood waste, coal slurries and fly ash at ethanol and power stations to simplify material handling requirements.

    By Schwing Bioset, Inc. based in Somerset, WISCONSIN (USA).

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks. Operation under a low vacuum ensures the possibility to recover the cooling lubricants for later reuse. After the thermal treatment, for appropriate handling in the melting process, the metal powder is pressed into briquettes. With the econ VacuDry technology, 100% recycling of all ingredients is possible.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Machine condition monitoring for marine

    Overview

    Machine condition monitoring based on oil analysis has become an important, if not mandatory, maintenance practice by the marine industry. An effective oil analysis program will keep important assets such as engines, gearboxes, hydraulic systems, turbines, compressors, generators and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled down time.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you