Only show results available in Virginia? Ok

waste incineration system Applications

  • Premium

    Recycling of Incinerator Slag

    Incinerator slag mainly consists of mineral components, metal scrap and other unburnt materials. With our separation systems we are able to treat both the untreated ash as well as the mixed and contaminated metal fraction. Out of both fraction we can recover a clean aluminum and a heavy metal fraction.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Premium

    Emissions monitoring for waste incineration

    Process control and emission monitoring in a waste to energy plant is a challenge. A large number of gaseous components need to be measured with high accuracy. Almost 100% uptime is required and the monitoring system needs to be easy to maintain and fast to calibrate.

    By Opsis AB based in Furulund, SWEDEN.

  • Continuous emission monitoring for municipal waste incineration

    Local authorities incinerate domestic waste and other kinds of waste that typically include plastics, batteries and a diversity of unknown compounds. These may all produce acidic and other toxic emissions. Therefore, efficient flue-gas cleaning systems are needed to prevent their release into the environment.

    By Enviro Technology Services Ltd based in Stroud, UNITED KINGDOM.

  • Stack Testing for Sewage Sludge Incinerators

    SEWAGE TREATMENT INDUSTRY: Provided Incinerator Performance Testing Services and Relative Accuracy Testing of a Continuous Emission Monitoring system associated with sewage sludge incinerator.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Incineration Industry Emissions Monitoring & Analysis

    Monitoring of emissions from incinerators is a demanding application for Continuous Emission Monitoring Systems. The emissions produced are highly corrosive, some of the gases are soluble and, because the waste being burnt is constantly changing, the resulting stack gas temperature varies widely.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Premium

    Industrial Solution for incineration & thermal treatment

    Waste incineration, including solid municipal and hazardous waste, biomedical waste and hazardous liquid are all continually under more stringent scrutiny by regulators. Macrotek has designed and supplied many integrated systems to meet most guidelines. In several installations, hazardous waste has been combined with radioactive waste, requiring nearly non-detectable emission levels for many of the contaminants. Macrotek has installed and tested systems for these processes with the results significantly better than required standards.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Medical Waste Processing

    Presently, Medical Waste Processing has different ways, such as sanitary landfill, incineration by pyralysis, autoclave sterilization, chemical disinfection, microwave sterilization, thermal decomposition, and plasma process, ect. Harden Machinery has lots of experience in medical waste processing, we offer kinds of professional shredders to handle the processing. The medical waste can be shredded into uniform in size, which is smaller than 50mm to improve the incineration efficiency. Harden’s Medical waste crusher has good sealing and corrosion resistance. Cutter blades made of German alloy material, ensure good resistance and high impact strength, It meets the high degree of mixing medical waste requirements to shred stainless steel equipment, prosthetics and other metal products. Medical waste processing system has a reasonable blades layout and high pass rate of the screen structure to ensure the crusher is not blocked.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Industrial air pollution control for the recycling and waste management

    Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

  • Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

    Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes. Acid and particulate emissions from electronic board and metals recovery operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Green waste handling in the office

    Large amounts of waste are produced in offices; and a lot of it is made up of paper and incinerable waste that should be recycled as far as possible. A vacuum system from Envac can be used to handle this waste easily, and at the same time it adds other value.

    By Envac AB based in Stockholm, SWEDEN.

  • e-scrap recycling System

    PCB Boards and E-scrap Recycling Plant 3.Why buy MINGXIN's E waste(PCB) Recycling plant ? Get the metal separated from waste circuit board through crushing and air separation process. No incineration and pollution. compliance with EHS standard, no harmfulness to workers, eco-friendly solution for E waste recycling. The plant has 5 advantages: A. The coarse crush can grind baseplate and separate electronic component.. B. National Environment Protection Standard achieved. No dust leak and no secondary pollution . C. Low energy consumption but high production. D. High metal recovery rate which reaches 97%-99%. Metal content in on-metal powder is less than 1%. E. Patent number: ZL02247015.8

    By Jiangxi Mingxin Metallurgy Equipment Co.,Ltd. based in Shicheng County, CHINA.

  • Measurement solution for QAL2 EN 14181

    BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making measurements with a comparative standard.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Continuous Metals Stack Monitor (CEMs)

    Cooper Environmental's Xact® 640 has the unique ability to generate high time resolution metals measurement in stacks. This unique capability has the potential to qualify as a substitution for the combination of a Hg/ PM CEMs application as well as the potential for a pollution control system feedback loop that could result in the reduction of pollution control consumables. Our systems have been site certified for compliance measurements at hazardous waste incinerator and secondary lead smelter sites.

    By Cooper Environmental based in Beaverton, OREGON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you