Only show results in Michigan? Ok

waste incinerator Applications

  • Premium

    Shenzhen Waste Incineration Power Plant Leachate Treatment

    Jiarong has provided the external TUF membrane leachate treatment systematic solution for Laohukeng waste incineration power plant in 2012.

    By Xiamen Jiarong Technology Corp., Ltd. based in Xiamen, CHINA.

  • Premium

    Environmental solutions for the waste incineration industry

    Multi-pollutant abatement systems. Different Categories of Waste Incineration: From a regulatory standpoint, the industry is divided into a number of categories: commercial/industrial solid waste incinerators (CISWI), municipal waste combustors (MWC), hospital/medical/infectious waste incinerators (HMIWI), hazardous waste combustors (HWC), sewage sludge incinerators (SSI), and other solid waste incinerators (OSWI). While each sub-category is subject to differing environmental regulations, all can benefit from...

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).

  • Analytical instrumentation for the waste incineration industry

    Analytical instrumentation for the waste incineration industry.

    By Focused Photonics Inc. (FPI) based in Hangzhou, CHINA.

  • Premium

    Waste incineration line continuous monitoring solutions

    In accordance with "Standard for pollution control on the municipal solid waste incineration" (draft), all existing and new the municipal solid waste incinerators need automatic continuous on-line monitoring of main ingredients in incineration flue gas. Monitoring projects should include at least HCl, SO2, NOx, soot, etc., but also need to detect CO and HF in some higher environmental requirements situations.

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Gas analyzers and monitoring systems for waste incineration sector

    Waste-to-energy (WtE) or energy-from-waste (EfW) through incineration of waste is on the one hand an effective way of producing electricity and heat, while on the other hand it is disposing of possibly hazardous or unrecyclable waste. Its purpose is not to compete with waste recycling, reuse and prevention, but to complement them. After all, incineration not only reduces the amount of hazardous waste, but may also generate energy through the gases released in the process. Read about our solutions for waste-to-energ...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Hangzhou Jiufeng Waste Incineration Power Plant Leachate Concentrate Reduction Treatment Project

    Hangzhou Jiufeng Waste-to-energy Plant is the first large-scale leachate reduction project referring to Waste-to-Energy Plants in China.

    By Xiamen Jiarong Technology Corp., Ltd. based in Xiamen, CHINA.

  • Premium

    Emissions monitoring for waste incineration

    Process control and emission monitoring in a waste to energy plant is a challenge. A large number of gaseous components need to be measured with high accuracy. Almost 100% uptime is required and the monitoring system needs to be easy to maintain and fast to calibrate.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Air pollution control solution for incineration sector

    Waste incineration, such as sewage sludge, municipal solid waste and hazardous waste incineration are areas under particular scrutiny by regulators because of their multiple toxic pollutants. The Clean Air Group, LLC has been selected by several hazardous waste facilities to design and build integrated multiple pollutant air pollution control systems to replace existing scrubber systems to meet the new Maximum Achievable Control Technology (MACT) standards. In several instances, only a scrubber was required, in...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Flue gas heavy metals on-line continuous monitoring solutions

    According to US EPA IO - 3.3 standard method of heavy metals, flue gas heavy metals analyzer uses XRF nondestructive testing technology and flue gas automatic enrichment technology to realize the accurate measurement of flue gas heavy metals such as waste incineration plants, cement plants, thermal power plants, etc.

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Ambient air and emissions monitoring of Polycyclic Aromatic Hydrocarbons – airmoC10-C20+

    Polycyclic Aromatic Hydrocarbons (PAHs) are a group of over 100 different chemicals that are known to be formed typically during incomplete combustion of organic matter at high temperature. Their major sources in the atmosphere include industrial processes, vehicle exhausts, waste incinerations, and domestic heating emissions. Due to their carcinogenic/mutagenic effects, 16 PAHs are currently listed as priority air pollutants.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Medical waste incinerators for laboratories

    Safe laboratory waste destruction is an ongoing challenge. With such a wide range of pollutants and particulates it is essential laboratory incinerators reach high temperatures to ensure total destruction of hazardous waste streams.

    By Inciner8 Limited based in Southport, UNITED KINGDOM.

  • Premium

    Air pollution control solution for medical sector

    Sterilization of medical instruments is required in the medical community. Either oxidizers or scrubbers have been used to control Ethylene Oxide (EtO), a gas typically used in the sterilization process. The Clean Air Group, LLC has become the recognized leader in EtO scrubbing with numerous installations at various sterilization facilities. Medical waste incinerator flue-gas treatment is another area of the Clean Air Group, LLC expertise.

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Hazardous waste incinerators for medical sector

    Our range of hazardous waste incinerators are specially designed to cope with ALL kinds of medical and hazardous waste in ALL climates and conditions. Our products ensure efficient, clean and hassle-free disposal of hazardous waste is possible. These models are suitable for the incineration of clinical waste including type 4 pathological waste (red bag waste) from Hospitals, Research Centres, Pharmaceutical Companies , Drug Manufactures, Primary Care Trusts, Private GPs Practices, Cosmetic Surgery Clinics,...

    By Inciner8 Limited based in Southport, UNITED KINGDOM.

  • Premium

    Continuous emissions monitoring solutions for mercury monitoring

    Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable results.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Recycling equipments for shredding hazardous waste

    The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Air pollution control (APC) equipments for waste incineration

    Waste incineration is a complex area. The mix of waste, moisture content, temperature of the waste, surrounding air and a variety of other factors interact and affect which residues are formed. Combustion entails often a gas consisting of heavy metals, sulfur oxides, chlorides, dioxins, etc. It is extremely important with a proper handling of the gas and the task often requires a mixture of wet and semi-dry treatment. EnviBAT offers equipment that brings particle levels down to extremely low levels, which guarantee...

    By Envibat AB based in Skellefteå, SWEDEN.

  • Premium

    Air pollution control solution for cement industry

    The fundamental ingredient in concrete is portland cement. The cement manufacturing process requires a great deal of energy to heat the mixture of raw materials in a cement kiln. The main source of toxic emissions from a portland cement plant is the kiln. The treatment of kiln exhaust is similar to most incinerators processes. Scrubbers are the best choices for control of acid gases, fine particulate, heavy metals as well as dioxin and furans. The MACT II regulations, yet to be finalized, for cement kilns are...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you