Only show results available in Virginia? Ok

waste management industry Applications

  • Waste dewatering for waste management industry

    Separation and dewatering of suspensions are important process stages when treating waste and digester output. BELLMER KUFFERATH machines, within an overall waste management concept, divide waste streams into separate streams in an optimal way in waste treatment plants, for which specific treatment methods make sense. Apart from single machines, BELLMER KUFFERATH also supply complete systems for sortation and dewatering of waste streams.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Premium

    Industrial air pollution control for the recycling and waste management

    Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

  • Premium

    Electronic scrap shredding for the electronic waste management industry

    One of the greatest challenges facing our society is the reclamation of valuable raw materials from electrical and electronic scrap. A global scrap volume exceeding 40 million tonnes a year – a figure forecast to double by 2025 – presents both a challenge and an opportunity. Since even in Germany only some 40% of scrap is currently fed into a waste management process, we may assume that the global rate of waste management is still substantially lower. With additional support from WEEE Directive...

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Dewatering of explosive / corrosive media for waste management industry

    In customer-specific chemical processes, explosive and corrosive solvents are used to systematically change the stock characteristics of e.g. pulp or plastic which calls for appropriate measures to protect the machine as well as the environment. To meet such requirements, BELLMER KUFFERATH Machinery has adapted their screw presses` proven functional concept to suit special requirements, such as:

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Separation and dewatering of digester output for waste management industry

    Separation and dewatering of suspensions are important process stages in treating waste and digester output. BELLMER KUFFERATH machines, within an overall waste management concept, divide waste streams into separate streams in waste treatment plants, for which specific treatment methods make sense. Apart from single machines, BELLMER KUFFERATH also supply complete systems for sorting and dewatering of waste streams.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Odor control solutions for solid waste industry

    Today in modern society we generate waste and and we generate it in vast quantities. Professionals around the world are dedicated to processing this material as efficiently as possible. Efficient processes and higher population density increase the risk of affecting the quality of life of workers, neighboring communities and the overall population.

    By Ecolo Odor Control Technologies based in Toronto, ONTARIO (CANADA).

  • Waste Management Solutions for Metal Manufacturing Industry

    There are several challenges faced by the metal manufacturing industry. Firstly, there is a drive to recover as much metal credit as possible before disposal of by-products as wastes. Secondly, there is a requirement to minimise waste generation or alternatively minimise the costs of managing the disposal of any hazardous waste material generated during the manufacturing process. Finally, keeping the company competitive by generating value or by reducing costs in the manufacturing process. Any solutions that...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Waste compaction for the waste & recycling industry

    If you are in the business of waste management, you will share our vision of implementing streamlined systems, operationally sound processes and reliable equipment. HSM is committed to providing the right baler specification for your process, no matter how demanding. HSM has many important and longstanding relationships with many global leading waste management and recycling businesses, supplying balers around the world. We share their visions and understanding of their operational needs.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Solid waste management @ source:

    Any industry that is producing a food waste that can be handled and disposed / treated in our system safely, conveniently, and hygienically.

    By EcoCare Technologies based in Chennai, INDIA.

  • Premium

    Wastewater treatment management for domestic waste water reuse industry

    Increasing population growth and urbanization rates across the world are placing increasing stress on clean water resources and making it more imperative to treat domestic waste water. Additionally, rising water costs due to increasing water scarcity and implementation of tighter environmental regulations to reduce waste water discharge limits are requiring municipal domestic wastewater treatment operators to seek innovative and efficient domestic wastewater treatment solutions. Genesis Water Technologies...

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Premium

    Waste compaction for the retail industry

    Retail outlets and leisure facilities will undoubtedly generate large quantities of waste. Heavy footfall inevitably leads to waste management issues in order to ensure premises are kept clean, tidy and safe. HSM’s balers offer the ideal solution for any shop, retail outlet and leisure facility. HSM’s product range includes small footprint balers ideally suited to retail waste and a cost-effective and efficient alternative to skips and bins.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Sewage Water Tank

    Sewage Water Tank used in agriculture, industry, remote area. Its advantages are handles welded around the perimeter allow for easy setup and packing, rapid deployment, large capacity, and low cost. If you have any need kindly let us know, we will provide

  • X-ray fluorescence XRF analysis for environmental protection and waste management

    To meet the requirements of new regulations and to protect the environment effectively, industries need techniques that enable the analysis of elements at lowest concentration levels. Bruker X-ray fluorescence (XRF) analysis is the most suitable analytical technique for handling different kinds of materials. Bruker’s XRF, ICP-MS, GC, TOF-MS, FT-IR, CBRNE products and applications help you to monitor contaminated land efficiently and quickly, to determine hazardous elements in the air and water, as well...

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Large waste bins for councils and municipalities and the industry

    Absolutely hygienic, stable and cost-efficient. The MGB with spherical base represents hygienic waste disposal of residual and organic waste as well as food waste. The dustbins are optimised for side loaders. Cost benefits for councils and municipalities as well as private waste management companies. Absolutely low-noise, serially only 89 dB in accordance with EU outdoor noise directive 2000/14 EC at the MGB 120-KB and 91 dB at the MGB 240-KB. High operational safety.

    By P. Henkel GmbH based in Kreuztal, GERMANY.

  • Enterprise resources planning for the waste & recycling industry

    THE CHALLENGE: NOT ONLY DISPOSAL, BUT ALSO PROCESSING. The waste management and recycling industry consists of companies acting as waste collection and landfill operators, processers (sorters, waste treatment specialists, shredders and recyclers) or traders in secondary raw materials.

    By FWI Information Technology GmbH based in Steyr-Gleink, AUSTRIA.

  • Balers and compactor solutions for facility management industry

    The success of any waste handling or facility management contract depends on your ability to offer value adding and reliable services to your customers at the best possible quality compared to the investment. The customer’s needs vary and the right solution depends on several important factors.

    By Bramidan Balers based in Bramming, DENMARK.

  • Premium

    Wastewater treatment management for hotel water treatment industry

    Genesis Water Technologies partners with leading hotel and resort companies involved in developing hotels and resorts across the world to integrate sustainable environmentally friendly customized hotel water treatment solutions for drinking water, gray water reuse and domestic waste water.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Systems for the product/material destruction industry

    Product destruction can be a tricky undertaking. Not only do you have a mixed material stream to manage, but you also need to extract and discard the contents of those materials before they can be recycled. Every operation really does require a custom solution that works best for your demands. From deliquifying bottles and cans, to destroying poor-quality or outdated products, OBC has the experience to help you determine the most efficient and effective process to achieve your goals. Keep your workplace...

    By OBC Baling Equipment based in Cleveland, OHIO (USA).

  • Sludge monitoring for water and wastewater industry

    Improved monitoring and automation can deliver more efficient waste treatment and reduced energy consumption and improved effluent quality. The cost of treatment and the quality of effluent discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you