Only show results available in Virginia? Ok

waste management site Applications

  • Waste Management Issues

    • Consulting, development and registration of the Declaration on Formation of Waste (according to the Decree of the Cabinet of Ministers of Ukraine No. 1218 of 03.08.1998 (most recent version dated 30.10.2013); • Development of the Registry Map of the Object of Formation of Waste (RM OFW) and/or the Registry Map of the Object of Handling and Disposal of Waste (RM OHDW) (according to the Decree of the Cabinet of Ministers of Ukraine No. 1360 of 31.08.1998 (most recent version dated 30.10.2013); • Inventory of Waste (the detection, identification, description and registration of waste, amounts accounting of their formation, recycling and removal; the identification and examination of waste's places and objects of waste operation); • Development of guidelines for safe waste disposal; • Development of technical passports of different hazardous wastes; • Development of a Passport for a Sites for the Disposal of Waste (PSDW).

    By PP `Tehnologia O` based in Vinnytsia, UKRAINE.

  • Dust collection and odor control in waste management sites

    Th turn key plant is composed by three different wet stages. The first stage is a venturi jet scrubber to collect dust and particles, then the second and third stages are deputed to absorb bad smells, such as H2S, Ammonia and Ammines. The absorption takes place thanks to the injection of chemicals (such as Sulphuric Acid, Sodium Hypochlorite and Sodium hydroxide.

    By F.G.M. engineering srl based in Santa Croce sull`Arno, ITALY.

  • Waste Treatment for Sludge

    Town development provokes an increase in the number of used-water treatment sites. In turn, these factories generate silt which must be treated. Therefore, MENART develops and equips silt treatment purification stations with: Corridor turners for silt drying. Sludges mixers with green waste coupled to a sieve. Green waste shredders. Jigger-mixers. Once treated, these sludges can be spread to enhance farming.

    By Menart based in Dour, BELGIUM.

  • municipal and industrial waste water treatment

    glass fused steel tanks are used as various digesters and reactors in municipal and industrial waste water treatment plants. * superior performance in corrosion resistance and against rust *factory fabrication tank . No painting or spray on erection site . * minimal maintenance cost * No need crane or other large equipment during erection * not subjected to severe weather and environment. * can be designed to future expansion, dismantle or re-movement. * free service for technical drawings * turn key service from proposal to tank commissioning .

    By Shijiazhuang Zhengzhong Technology INC. based in Shijiazhuang City, CHINA.

  • Premium

    Contaminated Water Filtration

    Industry standard best practices are designed to ensure that all work done on Asbestos Abatement Projects is done to the highest level of safety and risk management. Containment of the generated waste water fibers and debris is critical to proper compliance and worker safety. If these fibers are not captured and contained, they can be very harmful for the environment, on-site workers and the occupants of neighboring areas. Exactly how you approach your containment and capture solutions will depend on the individual site’s risk assessment report. If you need help identifying solutions to the issues raised in the report, feel free to contact our customer service department and we can review your options together. Water from showers at Asbestos Abatement sites is often contaminated with asbestos fibers from washing protective gear and equipment. This water must be filtered prior to discharge into a drain.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Waste water treatment plants Personnel Safety & H2S filter management

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. As a result of the confinement of the waste water stations, toxic components such as H2S and Methylmercaptan increased. Safety of employees on such working sites has therefore become of major problem. To fight this hazardous pollution, air filtering systems have been installed. For the station managers, personal safety coupled with the need for constant air quality control and filter change has been a heavy task.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Methane and Carbon Dioxide Sensing for Landfill Applications

    Application: In March 1986 an explosion destroyed a bungalow adjacent to a landfill site in Loscoe, Derbyshire. Subsequent measurements showed that 150-200 cubic meters of gas per hour were being generated by landfill waste. This event triggered a change in the way the waste industry considered and regulated gas generated at landfill sites; resulting in the landfill regulations of 2002, and in particular LFTGN03: the Guidance on the Management of landfill Gas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Wastewater Treatment for Manufacturing

    B & V Effluent Services have been helping the manufacturing industry with its waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip company’s within the manufacturing industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when discharged as part of a sites effluent. B & V Effluent Services experience within this industry enables us to provide solutions to all manner of issues as well looking to optimise systems and save money for our clients wherever possible.

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

  • Water Treatment for Personal Care / Water Treatment for Cosmetics

    B & V Effluent Services has been helping the cosmetics and personal care industry with their waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip companies within this industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when discharged as part of a sites effluent. B & V Effluent Services experience within this industry enables us to provide solutions to all manner of issues as well looking to optimise systems and save money for our clients wherever possible.

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you