Only show results available in Virginia? Ok

waste management system Applications

  • Waste dewatering for waste management industry

    Separation and dewatering of suspensions are important process stages when treating waste and digester output. BELLMER KUFFERATH machines, within an overall waste management concept, divide waste streams into separate streams in an optimal way in waste treatment plants, for which specific treatment methods make sense. Apart from single machines, BELLMER KUFFERATH also supply complete systems for sortation and dewatering of waste streams.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Solid waste management @ source:

    Any industry that is producing a food waste that can be handled and disposed / treated in our system safely, conveniently, and hygienically.

    By EcoCare Technologies based in Chennai, INDIA.

  • Premium

    Industrial air pollution control for the recycling and waste management

    Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

  • Separation and dewatering of digester output for waste management industry

    Separation and dewatering of suspensions are important process stages in treating waste and digester output. BELLMER KUFFERATH machines, within an overall waste management concept, divide waste streams into separate streams in waste treatment plants, for which specific treatment methods make sense. Apart from single machines, BELLMER KUFFERATH also supply complete systems for sorting and dewatering of waste streams.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Decanter centrifuge & cuttings for drilling waste management & disposal

    Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers Vertical Cuttings Dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the mud circulation system. GN offer a complete package of drilling waste management tank system as well.

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Premium

    Electric bin lifts for refuse collection vehicles

    EcoNord specialises in the design, production and sales of environmental friendly equipment and data systems for the waste management industry.

    By EcoNord Ltd based in Reykjavik, ICELAND.

  • Premium

    Waste Compaction for the Waste & Recycling Industry

    If you are in the business of waste management, you will share our vision of implementing streamlined systems, operationally sound processes and reliable equipment. HSM is committed to providing the right baler specification for your process, no matter how demanding.

    HSM has many important and longstanding relationships with many global leading waste management and recycling businesses, supplying balers around the world. We share their visions and understanding of their operational needs.

    Our balers can be installed in recycling plants of any size and type, baling mixed waste using easily switchable baling programs, creating heavy transportable bales allowing the maximum commercial benefit. It’s critical that waste and recycling plants have modern, effective and fit for purpose systems in place to ensure they are meeting targets and improving processes on a daily basis.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • RDF

    RDF (Refuse Derived Fuel) is made from domestic waste which includes biodegradable material as well as plastics, and has a lower calorific value than SRF (Solid Recovered Fuel). RDF (Refuse Derived Fuel) is used in combined heat and power facilities, many of them in Europe where they produce electricity and hot water for communal heating systems in the local area. Compared to landfilling, the lower carbon emissions resulting from RDF manufacture outweigh the emissions associated with transporting the reclaimed fuel. The increasing importance of Waste to Energy/RDF Waste to energy conversion is an increasingly recognised approach to resolving two issues: waste management and sustainable energy. Waste represents an increasingly important fuel source. Using waste as fuel can have important environmental benefits. It can not only provide a safe and cost-effective way of waste disposal but can also help reduce carbon dioxide emissions. https://the-mkgroup.com/portfolio/rdf-manufacture/

    By MK Group based in Galbally, IRELAND.

  • Systems for the product/material destruction industry

    Product destruction can be a tricky undertaking. Not only do you have a mixed material stream to manage, but you also need to extract and discard the contents of those materials before they can be recycled. Every operation really does require a custom solution that works best for your demands. From deliquifying bottles and cans, to destroying poor-quality or outdated products, OBC has the experience to help you determine the most efficient and effective process to achieve your goals. Keep your workplace environment clean and sanitary, and maximize profit by maximizing throughput.

    By OBC Baling Equipment based in Cleveland, OHIO (USA).

  • Premium

    Waste water treatment plants Personnel Safety & H2S filter management

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. As a result of the confinement of the waste water stations, toxic components such as H2S and Methylmercaptan increased. Safety of employees on such working sites has therefore become of major problem. To fight this hazardous pollution, air filtering systems have been installed. For the station managers, personal safety coupled with the need for constant air quality control and filter change has been a heavy task.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Water & Waste Water LIMS Solutions

    Water testing laboratories and laboratories that support water treatment plants have long discovered the benefits of Laboratory Information Management Systems - LIMS. Today many are looking to replace earlier systems with a system that is easier to support, has a proven upgrade path and is highly flexible and configurable. These laboratories as well as new facilities being commissioned will benefit by installing a user specific configuration from the very successful Autoscribe Matrix LIMS software designed specifically for the water and waste water industry.

    By Autoscribe Informatics based in Reading,, UNITED KINGDOM.

  • EPR waste minimisation monitoring for wastewater treatment industry

    The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a point scoring system to assess operators under the OMA-3 program and this will be used to identify how well a company is managing their processes and possibly identify areas for improvement. The Environmental Permitting Regulations require industry to install instrumentation (MCERTS approved where available) to report water quality. EPR compliance monitoring may include automatic water sampling, flow measurement, pH, turbidity and TOC water analysis. Industry will need to identify point of source emissions, take steps to correct inefficient control and alarm unacceptable process deviations. Although the legislation focuses on environmental improvement, good housing keeping also makes a lot of sense. Optimisation of process control minimises waste, reduces treatment costs and ultimately saves money.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Wastewater treatment solutions for anaerobic sludge digestion sector

    Anaerobic digestion is a series of processes in which microorganisms break down biodegradable material in the absence of oxygen, used for industrial or domestic purposes to manage waste and/or to release energy. It is widely used as part of the process to treat wastewater, like Upflow Anaerobic Sludge Blanket (UASB) reactors. As part of an integrated waste management system, anaerobic digestion reduces the emission of landfill gas into the atmosphere. Anaerobic digestion is widely used as a renewable energy source because the process produces a methane and carbon dioxide rich biogas suitable for energy production, helping to replace fossil fuels. The nutrient-rich digestate which is also produced can be used as fertilizer. The digestion process begins with bacterial hydrolysis of the input materials in order to break down insoluble organic polymers such as carbohydrates and make them available for other bacteria. Acidogenic bacteria then convert the sugars and amino acids into carbon dioxide, hydrogen, ammonia, and organic acids. Acetogenic bacteria then convert these resulting organic acids into acetic acid, along with additional ammonia, hydrogen, and carbon dioxide. Finally, methanogens convert these products to methane and carbon dioxide.

    By QM Environmental Services Ltd. based in The Hague, NETHERLANDS.

  • Electrical Based Tomography Systems for Slurry Flow

    Slurry transportation is required in a diverse range of sectors, from food to minerals processing; and oil sands processing to nuclear waste management. As a process it requires significant levels of energy and the abrasive nature of materials used can lead to ongoing issues of pipeline erosion.

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • Pumping solutions for offshore liquid ring pump systems

    In offshore drilling, the safety of both people and the environment is dependent on the constant management of risk. With great public concern and media attention, the safety of offshore drilling for both people and environment, has been widely discussed for many years. Offshore drilling can potentially cause oil spills or disposal of other waste into the ocean, impacting human life and marine life.

    By Samson Pumps A/S based in Viborg, DENMARK.

  • Best-in-class Carbon Footprinting and Reporting Tool for Organisations

    Our Impacts is the web-based energy, travel, waste, water and carbon accounting platform you’re looking for. Trusted by hundreds of clients worldwide and created by the most experienced environmental analysts and software developers you can find. Its white-labeled version allows professionals to service and manage their clients directly through the platform.

    By Ecometrica based in London, UNITED KINGDOM.

  • Active Refinery Remediation

    Waste Management Unit (WMU) closures at this active refinery Waste Management Unit (WMU) closures at this active refinery - Installation of several soil, Liquid Boot, and full multi-layer geocomposite cover systems in various facility locations- - Sensitive construction practices including large scale activities near power lines, 30 inch raw water line, and several active emergency flares - Completed performance based in-situ solidification/stabilization, cap and closure, using ENTACT owned large diameter auger Delmag rig and custom-fabricated Geodrill - COC`s include heavy metals, PAH, volatile organic compounds, and petroleum hydrocarbons Performance criteria include an unconfined compressive strength of 10 psi, permeability coefficient of less than 2.1x10-6 cm/sec, and an admixture pH of less than 11.5 - ENTACT performed in-house treatability analysis to develop reagent admixture

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Wastewater Treatment for Manufacturing

    B & V Effluent Services have been helping the manufacturing industry with its waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip company’s within the manufacturing industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when discharged as part of a sites effluent. B & V Effluent Services experience within this industry enables us to provide solutions to all manner of issues as well looking to optimise systems and save money for our clients wherever possible.

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

  • Water Treatment for Personal Care / Water Treatment for Cosmetics

    B & V Effluent Services has been helping the cosmetics and personal care industry with their waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip companies within this industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when discharged as part of a sites effluent. B & V Effluent Services experience within this industry enables us to provide solutions to all manner of issues as well looking to optimise systems and save money for our clients wherever possible.

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you