Only show results available in Virginia? Ok

waste operator Applications

  • Premium

    Recycling plant operation

    By Eggersmann Anlagenbau based in Bad Oeynhausen, GERMANY.

  • Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

    Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes. Acid and particulate emissions from electronic board and metals recovery operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Waste compaction for the waste & recycling industry

    If you are in the business of waste management, you will share our vision of implementing streamlined systems, operationally sound processes and reliable equipment. HSM is committed to providing the right baler specification for your process, no matter how demanding. HSM has many important and longstanding relationships with many global leading waste management and recycling businesses, supplying balers around the world. We share their visions and understanding of their operational needs.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Waste shredding for the waste RDF line

    Waste of all kinds is now considered a potential energy source and an important growth market for stationary shredder technology. Most plastic and paper waste RDF (refuse-derived fuel) plants have specific requirements regarding shredding capacity, grain size and operating reliability to ensure reliable and consistent production. Because of its ability to conform to the most stringent guidelines, Metso shredder equipment is increasingly in demand by this sector.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Premium

    Evaporation technology for waste industry

    The leachate produced by the waste in the landfill is an extremely pollutant effluent that requires high effective treatment processes to comply with the very strict limits for discharging operations. EVALED evaporators are a technological solution which allow to exploit the biogas cogeneration for the full or partial power supply of the plant within the limits of the environmental regulations and to reduce the relevant costs for thermal energy and leachate disposal.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Premium

    Waste recovery for petrochemical wastes

    Traditionally, the Petrochemical Sector has operated with basic technological solutions, with ultimate reliance on High Temperature Incineration (HTI) and landfill in order to deal with their hazardous wastes. However, tightening regulation, increasing landfill costs and social responsibilities are driving companies to look at alternative methods of treatment of very challenging wastes, including the treatment of:

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Waste Management Solutions for Mining Wastes

    Mining waste typically arises from the limitation of the installed technologies of an operation, e.g. where fines cannot be tolerated. They are associated with mine workings and often contain valuable and/or hazardous materials. The hazardous content, which are often the valuable fractions within this waste are typically metals. Spread of metal toxicants in association with tailings particles, through a combination of wind dispersion or if washed into the soil or rivers, can have a highly damaging effect on the environment. Crucially, as time moves on, the mine tailing of one generation become the resource of the next.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Reliable Shredding Technology for Waste Processing

    Our shredders are well suited for a 1-step or 2-step waste recycling. A mechanical-biological waste recycling is usually performed when processing household or commercial waste similar to household waste. The goal of this treatment is to generate a landfill-suited waste material by separating waste fractions with a high calorific value, valuable resources as well as foreign objects. We understand the tough requirements that the shredding technology of a mechanical-biological waste recycling system faces. With our newly engineered XR series we are able to offer the ideal product that meets these tough requirements for both low operating costs and high availability.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Recycling Equipment for Waste to Energy

    Create high-value RDF with MSW and C&I waste; Optimising the output in terms of economic value and against the lowest possible costs per tonne is the short-term goal for every single system that Bollegraaf provides. The benefits: permanently low operating cost and lowest cost per tonne. The result: fast return on investment.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Recycling Equipment for Single Stream Waste

    Optimising output in terms of economic value and against the lowest possible costs per tonne. This is the short-term goal for every Single Stream installation that we provide in cooperation with Bollegraaf. The long-term goal is to ensure permanently low operating costs. The result: fast Return on Investment.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Recycling Equipment for De-Inking Waste

    Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for every installation that Bollegraaf provides. The long-term goal is to ensure permanently low operating costs and achieve an optimal return on investment.  The better the separation, the higher the value of the output. This is the very essence of our paper & cardboard processing equipment: to increase the quality of the end product. At Bollegraaf, we build and provide high-end turnkey installations that combine a range of effective separation technologies that will improve the quality of the output and its intrinsic value. This will substantially reduce de-inking costs for your clients, the paper mills.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Optimization of Wastewater Processing and Operations

    The biocatalytic composition Bio-Organic Catalyst (BOC) provides numerous benefits for all of the biological processes (aerobic and anaerobic) used to convert waste loadings into high quality discharges. The array of benefits made possible with BOC can be applied system-wide to bring critical solutions to the fundamental challenges of operators. Odors, improving dissolved oxygen levels, reduction of organic loadings and biosolids, bio-film build up, elimination of Fats, Oils & Grease (FOG), and improvements in discharge quality are all operating parameters that can be improved with use of BOC.

    By EcoJump LLC based in Santa Clara, CALIFORNIA (USA).

  • Waste Management Issues

    • Consulting, development and registration of the Declaration on Formation of Waste (according to the Decree of the Cabinet of Ministers of Ukraine No. 1218 of 03.08.1998 (most recent version dated 30.10.2013); • Development of the Registry Map of the Object of Formation of Waste (RM OFW) and/or the Registry Map of the Object of Handling and Disposal of Waste (RM OHDW) (according to the Decree of the Cabinet of Ministers of Ukraine No. 1360 of 31.08.1998 (most recent version dated 30.10.2013); • Inventory of Waste (the detection, identification, description and registration of waste, amounts accounting of their formation, recycling and removal; the identification and examination of waste's places and objects of waste operation); • Development of guidelines for safe waste disposal; • Development of technical passports of different hazardous wastes; • Development of a Passport for a Sites for the Disposal of Waste (PSDW).

    By PP `Tehnologia O` based in Vinnytsia, UKRAINE.

  • Waste management for military

    At sea or on land, compact removal of waste from military facilities is beyond a valuable and green activity, but a logistical imperative. Minimizing space, labour and equipment dedicated to waste management in both marine and land-based operations is of great value for military applications. In addition, security is a major concern for military ships. Minimizing the time the ships spend docked or in proximity to foreign ports significantly reduces the risks of enemy attack. Moreover, they generally carry more personnel than equivalent sized commercial vessels and spend longer periods at sea, intensifying waste management problems.

    By Terragon Environmental Technologies Inc. based in Montréal, QUEBEC (CANADA).

  • Premium

    Industrial Paper & Mill Waste shredding

    SSI offers a variety of low-speed, high-torque shredding solutions for pulp and paper mill materials processing to increase mill efficiency. SSI shredders can be found in large paper processing operations around the world. Whether it’s shredding prior to a baler to increase density, shredding with commingled materials to mix and create another product, or shredding prior to a pulper at a mill, we have a machine for that.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Large waste bins for councils and municipalities and the industry

    Absolutely hygienic, stable and cost-efficient. The MGB with spherical base represents hygienic waste disposal of residual and organic waste as well as food waste. The dustbins are optimised for side loaders. Cost benefits for councils and municipalities as well as private waste management companies. Absolutely low-noise, serially only 89 dB in accordance with EU outdoor noise directive 2000/14 EC at the MGB 120-KB and 91 dB at the MGB 240-KB. High operational safety.

    By P. Henkel GmbH based in Kreuztal, GERMANY.

  • Enterprise resources planning for the waste & recycling industry

    THE CHALLENGE: NOT ONLY DISPOSAL, BUT ALSO PROCESSING. The waste management and recycling industry consists of companies acting as waste collection and landfill operators, processers (sorters, waste treatment specialists, shredders and recyclers) or traders in secondary raw materials.

    By FWI Information Technology GmbH based in Steyr-Gleink, AUSTRIA.

  • Correctional facilities - PRISON Waste

    20% to 26% of all people living with HIV and 29% to 43% of all those infected with the hepatitis C virus, and 40% of all those who had tuberculosis disease passed through correctional facilities. As the number of people incinerated increase around the world, the issues associated with prison waste is also on the rise. All waste from correctional facilities should be sterilized in the OZONATOR NG Technology before leaving the prison complex. The opportunity to reduce waste processing costs at these facilities is apparent and the opportunity to provide inmate work training as operators of the advanced OZONATOR NG Technology is realistic. An opportunity with multiple long term benefits.

    By OZONATOR Industries Limited based in Regina, SASKATCHEWAN (CANADA).

  • Decanter centrifuge & cuttings for drilling waste management & disposal

    Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers Vertical Cuttings Dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the mud circulation system. GN offer a complete package of drilling waste management tank system as well.

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you