Only show results available in Virginia? Ok

waste recovery Applications

  • Waste recovery for glass manufacturing

    Tetronics` twin torch system has been used continuously for the commercial production of high quality silica glass for optical applications since 1992. Tetronics’ unique twin torch technology allows a plasma arc to be created in space, which enables a falling stream of high quality silica powder to be melted at the junction of the two arcs to form an ingot of high optical quality silica glass. By using plasma as a clean and controllable heat source, the product has a high degree of integrity, because the absence of a natural gas flame means the resulting product is free from bubbles, contamination and other defects.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Waste recovery for petrochemical wastes

    Traditionally, the Petrochemical Sector has operated with basic technological solutions, with ultimate reliance on High Temperature Incineration (HTI) and landfill in order to deal with their hazardous wastes. However, tightening regulation, increasing landfill costs and social responsibilities are driving companies to look at alternative methods of treatment of very challenging wastes, including the treatment of:

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Waste recovery for nuclear wastes

    Nuclear waste is divided into low, medium, and high‐level waste by the amount of radiological character it contains. Low and Intermediate Level Nuclear waste is the radioactive waste resulting from nuclear facility consumables, clothing, laboratory equipment etc. This waste can adversely affect human health and the environment and therefore must be handled appropriately. Typically, the waste is kept underwater for 3-5 years until the radiation decays to levels that can be shielded by concrete in large storage casks, where it can be held for thousands of years. A challenge for the nuclear industry is the cost associated with conditioning, packaging and storage of these heterogeneous wastes. Therefore, a solution that can decrease the volume of nuclear waste, and reduce the amount of storage required, is considered a commercially advantageous option.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Biogas recovery for waste to energy industries

    HydroThane BSP technology is the best method for H2S removal combining deep H2S removal, a very high reliability and availability, and low lifecycle costs. The clean biogas can be used to produce electricity or to replace natural gas in a boiler.

    By HydroThane STP BV based in KC `s Hertogenbosch, NETHERLANDS.

  • Waste recovery for construction industry

    Construction waste consists of unwanted material produced directly or incidentally by the construction industry. This includes materials that may contain lead, asbestos or other hazardous materials. There is increasing pressure on the construction industry to dispose of this hazardous material in an environmentally responsible manner. Tetronics can help alleviate this pressure by providing waste recovery plants to deal with all types of hazardous wastes generated from a construction projects lifespan: from land remediation through to the treatment of APCs from incineration as well as the treatment of asbestos.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Stack Testing for VOC Recovery Afterburner Installation

    HAZARDOUS WASTE HANDLING INDUSTRY: Conducted on-site GC speciation of VOC constituents by Method 18 collecting samples continuously around-the-clock in large vacuum canisters in order to demonstrate compliance control of a VOC recovery/afterburner installation

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Waste recovery for organic wastes e.g. PCBs & Dioxins

    Tetronics` technology destroys organic wastes including Polychlorinated Biphenyls (PCBs) and other types of Persistent, Bio‐accumulative, and Toxic (PBT) pollutants at very high efficiencies across a wide range of concentrations.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Patented Waste Water Recovery System for Body Shop Waste Capture

    The GEOMAT Waste Water Recovery Systems are designed to be ideal for semi-permanent installations where installing a ground recovery system is not desired or economical. A Body Shop is an ideal application for this system as it can be custom designed and manufactured to specific needs while meeting all EPA regulations.

    By GEOMAT based in Tampa, FLORIDA (USA).

  • Recycling Systems for the recovery of secondary materials

    The recovery and reclamation of recyclable materials in the waste stream is possible through various selection and separation processes.In the case of materials such as PP, PET, HDPE, plastic, paper, aluminium etc. can be put back into circulation creating new raw materials, the so called “secondary” raw materials, produced not by nature but by man.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Eliminate non plastics in plastics recovery systems

    Ecohog Windshifter technology is used in plastics recovery systems to reduce and eliminate non plastics contaminates and in some cases unwanted plastics.

    By EcoHog Ltd based in Carrickmore, NORTHERN IRELAND.

  • Waste recycling systems for materials recovery facilities (MRF)

    Kiverco specialise in the design, manufacture and installation of Materials Recovery Facilities that can be tailored to your unique specifications. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your MRF recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Patented Waste Water Recovery System for Heavy Machinery & Parts Cleaning

    The GEOMAT systems can be designed to any specifications to fit your business needs - including maintaining and/or cleaning aviation equipment, military vehicles, golf course or farming equipment.

    By GEOMAT based in Tampa, FLORIDA (USA).

  • Patented Waste Water Recovery System for Marine Refinishing Industry

    Due to recent expansion of EPA regulations regarding discharge of water containing contaminants, owners of boats and marinas have had to heighten their awareness regarding waste water containment. If caught discharging any contaminated water overboard, even an ounce or less of light oil mixed with bilge water will produce a visible sheen on the ground or on the water. This is identified by the EPA as a reportable discharge, of which large fines are possible including clean-up costs, and even criminal prosecution when flagrant violations are detected. The GEOMAT Waste Water containment system can be customized to fit any size marine application such as refinishing, marine detailing, and waste disposal.

    By GEOMAT based in Tampa, FLORIDA (USA).

  • Waste shredding for the waste and recycling industry

    WEIMA makes waste valuable! No matter if it is industrial waste, bulky waste, production waste, rejects, paper, wood waste, textiles or carpet. WEIMA delivers the optimum results, winning secondary resource recovery by delivering correct size reduction. WEIMA shredding solutions are designed for every stage of process tailored to your individual needs.

    By WEIMA based in Ilsfeld, GERMANY.

  • Premium

    Waste sorting solutions for the packaging industry

    Packaging waste is mostly made up of different polymers, beverage cartons, paper and glass. Depending on the country in question, different collection systems apply and the material will invariably arrive in different conditions to the MRF’s (Materials Recovery Facility).

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Air pollution control for the waste gasification industry

    Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you