Only show results in Virginia? Ok

waste recycling plant Applications

  • Premium

    Recycling plant operation

    By Eggersmann Anlagenbau based in Bad Oeynhausen, GERMANY.

  • Premium

    Waste shredding for municipal waste plants

    There are valuable resources in waste that have to be extracted. Being specialists in the processing of waste of all kinds – first and foremost in the area of refuse derived fuels – we constantly work on the advancement of our solutions for customer-oriented and cost-effective shredding.

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.

  • Premium

    Recycling waste oil into a resuable fuel for waste & recycling industry

    With the increasing requirement to reduce or recycle products, used lubricating oils obtained from automobiles, large plant equipment, generators etc. are collected and sent to a facility to recycle the waste oil product into a reusable fuel. This fuel can be used by power stations and other facilities to reduce their usage of original and more expensive fossil fuel.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Waste recycling systems for wood waste processing

    Kiverco specialise in the design, manufacture and installation of Wood Waste Processing systems, which can be tailor made to meet your unique processing requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Wood Waste Processing recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Premium

    Continuous emissions monitoring in waste incineration plants

    Waste-to-energy through incineration of waste is an effective way of producing electricity and heat, at the same time getting rid of the possibly hazardous or unrecyclable waste. The waste can be incinerated at specific WtE plants or at plants with permission for co-incineration of waste at biomass boilers or cement kilns. The waste incineration plants are, however, governed by strict emissions regulations.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Waste recycling systems for composting

    Kiverco specialise in the design, manufacture, and installation of compost recycling systems that will be unique to your compost recycling requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Composting recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Waste recycling systems for co-mingled

    Kiverco specialise in the design, manufacture and installation of Co-Mingled waste recycling systems. We can offer a bespoke recycling plant that is tailored to meet your unique Co-Mingled recycling requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Co-Mingled recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Premium

    Shredders and crushers for special waste recycling

    Stopping the spread of hazardous waste! Ever-increasing consumption across Europe, coupled with rising prosperity among the populations of the typical emerging economy are causing a sharp upturn in the volume of waste worldwide. The shredding and sorting of rubbish and refuse is one of the key challenges within the waste management cycle. And with ERDWICH shredding machinery and plant, there is a perfect set of solutions for meeting any of these challenges in special waste applications.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Waste recycling systems for top soil

    Kiverco specialise in the design, manufacture and installation of Top Soil recycling systems, which can be tailor made to meet your unique processing requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Top Soil recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Premium

    Recycling equipments for tyre recycling

    Used tyres are among the largest and most problematic sources of waste today, due to the large volume produced and their durability. The same characteristics which make waste tyres a waste problem also make them one of the most re-used waste materials. Recycled tyre chips can be used for TDF (Tyre Derived Fuel) which is a fuel used for heat plants and cement ovens or for equestrian (i.e. rubber mixed with sand or sawdust used in the horse industry as ground in the stable or at the tracks). Rubber granulate is reused in e.g. sports fields, artificial turfs, rubber mats and moulded products. Rubber powder can be reused in rubber paved asphalt. The recovered steel can be smelted and reused just like non-recovered steel. Finally, the liberated textile has a very high effective burning value and can therefore be mixed with other materials in order to increase that material’s effective burning value. Read more: http://eldan-recycling.com/en/tyre-recycling

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling equipments for refrigerator recycling

    The Eldan refrigerator recycling plant is designed for processing refrigerators operating with CFC/pentane gasses in order to prevent harmful substances to evaporate into the atmosphere and to achieve the most efficient recycling of the solid materials. A complete refrigerator recycling system includes everything from pre-chopping to separation of the material.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling equipments for cable recycling

    Eldan Recycling has been active within cable recycling close to 60 years. What started with cable cutters, has expanded into including cable strippers, alligator shears and ACSR shears as well as machines and complete plants for processing of cables. Since copper and aluminium is 100% recyclable without loss of quality recycling of cable has always been a popular field.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Complete solutions for the recycling industry

    For over 40 years, Macpresse designs and manufactures complete solutions for the recycling industry. From individual technologies, i.e. balers, shredders etc. right up to complete sorting plants and Material Recovery Faclities.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Premium

    Document Destruction shredding

    SSI offers a variety of high-capacity, bulk-feed shredder models which produce small particles for paper document and security destruction. SSI offers several types of plant based system solutions ranging from low to high processing capacities. Here are some typical system solutions:

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Odor control for liquid waste

    Vaporize Odors Associated With Liquid Waste Processing: Liquid waste, such as fats, oils and grease (F.O.G.) can emit unpleasant odors, which become even more pronounced in various stages of processing. Malodorous F.O.G. from restaurants are often transported by truck to F.O.G. filtering facilities and then to plants where they are processed into useable byproducts.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Waste tyre to oil recycling process pyrolysis plant

    Waste tyre to oil recycling process pyrolysis plant the obtain thing as follows: 45%-55% fuel oil, 10%-15% steel wire, 30%-35% carbon black and 8%-10% flammable gas. You can get diesel from fuel oil by distillation plant. You can get a very high profit by disposing these wastes, and also it's helpful for improving the local environment, avoid garbage pollution. Waste tyre to oil recycling process pyrolysis plant advantages: 1. One week installation:no need to build foundation thus shorten the construction period, 4th and 5th machine installation period is one month, 6th machine install only need one week. Also easy to move. 2. Service life: Special design inside the reactor to avoid direct heating, so machine service life prolong to 3-5 times and the heating energy can realize 100% utilization. Contact: Ms Bonnie Phone: +86-371-5677 1821 +86 15893800169 Skype: bonniezhao2 Email: oilmachine@doinggroup.com www.wastetireoil.com www.doinggroup.com

  • Premium

    Reliable Shredding Technology for Organic Waste

    Our shredders process biological and biogenic waste to generate an optimal substrate for further utilisation in your biogas plant or in your disposal business. The application area ranges from green or garden waste to food waste and expired goods including packaging to slaughterhouse waste. Non-homogeneous or organic waste in pieces including packaging must be shredded to prepare it optimally for fermentation. Our low-speed S-series shredders are ideally suited for this application. These two-shaft shredders ensure reliable processing and guarantee a pumpable fermentation substrate. Thanks to the special equipment, efficient cutting unit and sturdy machine construction, these shredders are very reliable and have a long service life!

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Automobile plastic shredding for the special waste recycling industry

    Shredding plants for plastics from automobile industry as well as injection-moulded parts.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you