Only show results in Virginia? Ok

waste reduction Applications

  • Premium

    Waste Reduction for the Waste and Recycling Industry

    By PTF Häusser GmbH based in Borgholzhausen, GERMANY.

  • Premium

    Waste Reduction for the Material Recycling Industry

    By PTF Häusser GmbH based in Borgholzhausen, GERMANY.

  • Waste water respirometry solutions for toxicity reduction tests

    In industrial manufacturing companies, before a new process comes on-line, it is important to measure the toxicity of the effluent stream. This is especially the case for companies who treat their own waste. From the toxicity value (EC50) obtained, it may be a cost-effective solution to simply discharge the effluent to the treatment works at a slow and defined rate to minimise damage to the activated sludge. Following a period of acclimatisation it is often possible to increase feed rates to the plant and this can again be managed using the Strathtox Respirometer. An alternative approach is to undertake toxicity reduction procedures, such as neutralisation or acid hydrolysis, in pilot-scale laboratory studies. The Respiration or the Nitrification Inhibition Test may be used for this. In the future, toxicity reduction may be stipulated by local authority, water company or publicly-owned treatment works prior to giving discharge consents. Toxicity reduction may be evaluated using toxicity tests on activated sludge provided by the treatment works.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • COD Reduction

    Chemical Oxygen Demand (COD) is used as a measure of organic pollutants in water. In wastewater treatment, it indicates the efficacy of a treatment process and is expressed in milligrams per litre (mg/L) or parts per million (ppm). Removing certain fractions of COD in waste streams can be particularly challenging, especially to levels safe for discharge to the environment.

    By Arvia Technology based in Runcorn, UNITED KINGDOM.

  • Premium

    Waste shredding for the waste and recycling industry

    WEIMA makes waste valuable! No matter if it is industrial waste, bulky waste, production waste, rejects, paper, wood waste, textiles or carpet. WEIMA delivers the optimum results, winning secondary resource recovery by delivering correct size reduction. WEIMA shredding solutions are designed for every stage of process tailored to your individual needs.

    By WEIMA based in Ilsfeld, GERMANY.

  • Membrane filtration systems for reduction of BOD/COD

    Reverse Osmosis Polishers can concentrate BOD/COD from evaporator condensate and RO permeate streams to reduce waste water. Polished water can also be re-used in plant for boiler water make-up and CIP systems. In Dairy Industry applications, `polishing` of these process water streams aids in the production of Class I water for re-use from dairy products as defined and regulated under Food & Drug Administration rules. Water produced with this technique is also very soft, generally resulting in lower cleaning chemical consumption.

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Premium

    Shredders for Hazardous and Medical Waste

    SA Eng. designs and manufactures single machines and / or complete plants for the treatment of Hazardous Waste. The supply can relate to the single shredder used only for the volume reduction of the material or to imply the use of a Nitrogen Blanketing System of the machine and / or of the complete system with subsequent separation of the product. SA Eng. provides for the study of customized systems in compliance with the specific need/request of each customer.

    By SA Eng Soluzioni per l`Ambiente based in San Donà di Piave, ITALY.

  • Premium

    Hazardous waste shredding

    Fully Integrated, Custom Systems for Pre-processing of Hazardous Wastes. Drummed and bulk wastes enter the system, passing through a double-door airlock. Material is then processed through two hydraulic shredders. Following the size reduction process, provided by SSI Shredding Systems, material is then discharged to downstream equipment to complete the blending process.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Recycling equipments for shredding solid waste & municipal solid waste

    Solid waste and municipal solid waste (MSW) size reduction requires processing of many different materials, from filled drums to household waste. And, as the amount of solid waste increases and the cost of landfill management increases, it is becoming more critical that waste management become more effective, economic and efficient. Shredded and compacted waste is easier and cheaper to transport and extends the life of the landfill. In addition, separating out materials that can be reclaimed and recycled or that need to be incinerated or composted increases the landfill productivity while providing revenue to offset the costs of processing the solid waste.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Production waste and hazardous waste shredding with Mercodor shredding systems

    Mercodor crushing machines are used for crushing production waste and also for the volume reduction of hazardous waste. In order to a better storage of production and hazardous waste the volume must be reduce. Mercodor special engineering is your partner for professional shredding of production waste and for the crushing of hazardous waste.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Products for plastics recycling

    Machines for the dimensional reduction, cleaning and separation of plastics from contaminants (ex. glass, wood, aggregates, etc.).

    By Guidetti S.r.l. based in Renazzo (FE), ITALY.

  • Air pollution control for the waste gasification industry

    Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Scrap metal shredding

    Shredding of metals for volume reduction can simplify material handling, minimize storage space and reduce transportation and disposal costs. SSI has built shredders to process light scrap in a metal recycling yard, or materials generated by a manufacturer, such as aluminum extrusion from a door or window manufacturer. SSI shredders have also been used to prepare metals to feed into high-speed hammermills.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Products for non-ferrous metals recycling

    Machines for the dimensional reduction, cleaning and separation of metals, among them or from other non-metallic products (ex. glass, wood, plastic, etc.)

    By Guidetti S.r.l. based in Renazzo (FE), ITALY.

  • Premium

    Recycling equipments for shredding & reducing medical waste

    Shredding and reducing medical waste poses special challenges. Processing must meet stringent regulatory standards for the safe handling of infectious and red bag waste, including precise size reduction to ensure proper sterilization. In addition, the waste is comprised of many different materials, ranging from sharps to textiles, requiring shredders that can effectively process the variety of materials.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Pulp and paper mill waste

    SSI offers a variety of low-speed, high-torque shredding solutions for pulp and paper mill materials processing to increase mill efficiency. SSI designs and manufactures a variety of high-capacity shredding solutions specially suited for paper shredding and pulp mill materials processing. With SSI’s low-speed, high-torque technologies, pulp and paper mills are able to increase overall mill efficiency by reducing waste volume and lowering fuel, storage and transportation/disposal costs. SSI custom engineers the most effective size reduction solutions specific to the application.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Cardboard shredders for cardboard recycling

    Makes even the biggest mountains of cardboard into molehills! Every year, Germany produces around 10 million tonnes of cardboard and paperboard for the packaging industry. After their use, these items of cardboard packaging and boxes must then be reduced in volume before passing through the recycling process. This volume reduction step is performed by recycling companies and public recycling depots or in cardboard packaging and corrugated board factories.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you